We recently added support for gen11's new "output csc" which can be used
independently of the regular pipe CSC. The idea is that this new output
csc allows us to use a userspace-provided color transformation matrix at
the same time we drive a YCBCR display mode requiring RGB->YUV
conversion. However when landing that support we only updated the color
management code and overlooked that there was an additional atomic check
in the modeset path (in intel_crtc_compute_config()) that still assumes
we only have a single CSC unit to work with. Let's update that check to
only apply to pre-gen11 platforms and move it into the color management
code to ensure it gets called on all commits, not just modesets.
Also, if we're *only* using the output CSC and not the pipe CSC, there's
no need to set crtc_state->csc_enable, so let's also not consider the
output format when setting csc_enable on gen11+ platforms.
Fixes: a91de580541c ("drm/i915/icl: Enable pipe output csc")
Cc: Uma Shankar <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
---
It might also be worth moving the full->limited range RGB conversion
from the pipe CSC to the output CSC on gen11 at some point.
drivers/gpu/drm/i915/intel_color.c | 16 +++++++++++++---
drivers/gpu/drm/i915/intel_display.c | 12 ------------
2 files changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_color.c
b/drivers/gpu/drm/i915/intel_color.c
index da7a07d5ccea..b47e6d1aaaec 100644
--- a/drivers/gpu/drm/i915/intel_color.c
+++ b/drivers/gpu/drm/i915/intel_color.c
@@ -780,9 +780,10 @@ int intel_color_check(struct intel_crtc_state *crtc_state)
IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
limited_color_range = crtc_state->limited_color_range;
- crtc_state->csc_enable =
- crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB ||
- crtc_state->base.ctm || limited_color_range;
+ crtc_state->csc_enable = crtc_state->base.ctm || limited_color_range;
+ if (INTEL_GEN(dev_priv) < 11)
+ crtc_state->csc_enable |=
+ crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB;
ret = intel_color_add_affected_planes(crtc_state);
if (ret)
@@ -822,6 +823,15 @@ int intel_color_check(struct intel_crtc_state *crtc_state)
crtc_state->csc_mode |= ICL_OUTPUT_CSC_ENABLE;
crtc_state->csc_mode |= ICL_CSC_ENABLE;
+ } else if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB &&
+ crtc_state->base.ctm) {
+ /*
+ * There is only one pipe CSC unit per pipe on pre-gen11, and
+ * we need that for output conversion from RGB->YCBCR. So if
+ * CTM is already applied we can't support YCBCR output.
+ */
+ DRM_DEBUG_KMS("YCBCR420 and CTM together are not possible\n");
+ return -EINVAL;
}
return 0;
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index afa21daaae51..81bfdbd99092 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6855,18 +6855,6 @@ static int intel_crtc_compute_config(struct intel_crtc
*crtc,
return -EINVAL;
}
- if ((pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
- pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) &&
- pipe_config->base.ctm) {
- /*
- * There is only one pipe CSC unit per pipe, and we need that
- * for output conversion from RGB->YCBCR. So if CTM is already
- * applied we can't support YCBCR420 output.
- */
- DRM_DEBUG_KMS("YCBCR420 and CTM together are not possible\n");
- return -EINVAL;
- }
-
/*
* Pipe horizontal size must be even in:
* - DVO ganged mode
--
2.14.5
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
