Now since we have replaced the bits to show interest in hotplug IRQs
we can go and nuke the 'hotplug_supported_mask'.
Signed-off-by: Egbert Eich <e...@suse.de>
---
drivers/gpu/drm/i915/i915_drv.h | 1 -
drivers/gpu/drm/i915/intel_crt.c | 2 --
drivers/gpu/drm/i915/intel_dp.c | 3 ---
drivers/gpu/drm/i915/intel_hdmi.c | 3 ---
drivers/gpu/drm/i915/intel_sdvo.c | 9 +++------
5 files changed, 3 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 316747a..d8604a6 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -922,7 +922,6 @@ typedef struct drm_i915_private {
u32 irq_mask;
u32 gt_irq_mask;
- u32 hotplug_supported_mask;
struct work_struct hotplug_work;
bool enable_hotplug_processing;
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index de43cab..5654583 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -800,8 +800,6 @@ void intel_crt_init(struct drm_device *dev)
*/
crt->force_hotplug_required = 0;
- dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
-
/*
* TODO: find a proper way to discover whether we need to set the the
* polarity and link reversal bits or not, instead of relying on the
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 549933a..5a77d40 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2839,17 +2839,14 @@ intel_dp_init_connector(struct intel_digital_port
*intel_dig_port,
name = "DPDDC-A";
break;
case PORT_B:
- dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS;
intel_encoder->hpd_pin = HPD_PORT_B;
name = "DPDDC-B";
break;
case PORT_C:
- dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS;
intel_encoder->hpd_pin = HPD_PORT_C;
name = "DPDDC-C";
break;
case PORT_D:
- dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS;
intel_encoder->hpd_pin = HPD_PORT_D;
name = "DPDDC-D";
break;
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
b/drivers/gpu/drm/i915/intel_hdmi.c
index 8cd6bc1..e48452a 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1023,17 +1023,14 @@ void intel_hdmi_init_connector(struct
intel_digital_port *intel_dig_port,
case PORT_B:
intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
intel_encoder->hpd_pin = HPD_PORT_B;
- dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS;
break;
case PORT_C:
intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
intel_encoder->hpd_pin = HPD_PORT_C;
- dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS;
break;
case PORT_D:
intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
intel_encoder->hpd_pin = HPD_PORT_D;
- dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS;
break;
case PORT_A:
intel_encoder->hpd_pin = HPD_PORT_A;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c
b/drivers/gpu/drm/i915/intel_sdvo.c
index cf57705..d362dd5 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2780,6 +2780,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t
sdvo_reg, bool is_sdvob)
SDVOB_HOTPLUG_INT_STATUS_I915 :
SDVOC_HOTPLUG_INT_STATUS_I915;
}
+ /* Only enable the hotplug irq if we need it, to work around noisy
+ * hotplug lines.
+ */
if (intel_sdvo->hotplug_active)
intel_encoder->hpd_pin = HPD_SDVO_B ? HPD_SDVO_B : HPD_SDVO_C;
@@ -2811,12 +2814,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t
sdvo_reg, bool is_sdvob)
*/
intel_sdvo->base.cloneable = false;
- /* Only enable the hotplug irq if we need it, to work around noisy
- * hotplug lines.
- */
- if (intel_sdvo->hotplug_active)
- dev_priv->hotplug_supported_mask |= hotplug_mask;
-
intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
/* Set the input timing to the screen. Assume always input 0. */
--
1.7.7
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
