>-----Original Message----- >From: Ville Syrjala [mailto:[email protected]] >Sent: Tuesday, February 19, 2019 1:02 AM >To: [email protected] >Cc: Shankar, Uma <[email protected]>; Roper, Matthew D ><[email protected]> >Subject: [PATCH 6/7] drm/i915: Clean the csc limited range/identity programming > >From: Ville Syrjälä <[email protected]> > >Just provide precomputed CSC matrices for the identfy and limite range cases. >This
Some typo's here. >removes the remaining nuts and bolts stuff from ilk_load_csc_matrix(), >allowing one >to actually see the high level logic. With the above fixed. Reviewed-by: Uma Shankar <[email protected]> >Signed-off-by: Ville Syrjälä <[email protected]> >--- > drivers/gpu/drm/i915/intel_color.c | 53 +++++++++++++++--------------- > 1 file changed, 27 insertions(+), 26 deletions(-) > >diff --git a/drivers/gpu/drm/i915/intel_color.c >b/drivers/gpu/drm/i915/intel_color.c >index 0be7b7e802f5..adc5c25a6fcd 100644 >--- a/drivers/gpu/drm/i915/intel_color.c >+++ b/drivers/gpu/drm/i915/intel_color.c >@@ -52,21 +52,31 @@ > #define ILK_CSC_COEFF_FP(coeff, fbits) \ > (clamp_val(((coeff) >> (32 - (fbits) - 3)) + 4, 0, 0xfff) & 0xff8) > >-#define ILK_CSC_COEFF_LIMITED_RANGE \ >- ILK_CSC_COEFF_FP(CTM_COEFF_LIMITED_RANGE, 9) >-#define ILK_CSC_COEFF_1_0 \ >- ((7 << 12) | ILK_CSC_COEFF_FP(CTM_COEFF_1_0, 8)) >+#define ILK_CSC_COEFF_LIMITED_RANGE 0x0dc0 #define ILK_CSC_COEFF_1_0 >+0x7800 > > #define ILK_CSC_POSTOFF_LIMITED_RANGE (16 * (1 << 12) / 255) > > static const u16 ilk_csc_off_zero[3] = {}; > >+static const u16 ilk_csc_coeff_identity[9] = { >+ ILK_CSC_COEFF_1_0, 0, 0, >+ 0, ILK_CSC_COEFF_1_0, 0, >+ 0, 0, ILK_CSC_COEFF_1_0, >+}; >+ > static const u16 ilk_csc_postoff_limited_range[3] = { > ILK_CSC_POSTOFF_LIMITED_RANGE, > ILK_CSC_POSTOFF_LIMITED_RANGE, > ILK_CSC_POSTOFF_LIMITED_RANGE, > }; > >+static const u16 ilk_csc_coeff_limited_range[9] = { >+ ILK_CSC_COEFF_LIMITED_RANGE, 0, 0, >+ 0, ILK_CSC_COEFF_LIMITED_RANGE, 0, >+ 0, 0, ILK_CSC_COEFF_LIMITED_RANGE, >+}; >+ > /* > * These values are direct register values specified in the Bspec, > * for RGB->YUV conversion matrix (colorspace BT709) @@ -247,7 +257,6 @@ > static >void ilk_load_csc_matrix(const struct intel_crtc_state *crtc_state) > bool limited_color_range = ilk_csc_limited_range(crtc_state); > enum pipe pipe = crtc->pipe; > u16 coeffs[9] = {}; >- int i; > > if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 || > crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) { @@ >-271,28 +280,20 @@ static void ilk_load_csc_matrix(const struct >intel_crtc_state >*crtc_state) > > if (crtc_state->base.ctm) { > ilk_csc_convert_ctm(crtc_state, coeffs); >- } else { >- /* >- * Load an identity matrix if no coefficients are provided. >- * >- * TODO: Check what kind of values actually come out of the >- * pipe with these coeff/postoff values and adjust to get the >- * best accuracy. Perhaps we even need to take the bpc value >- * into consideration. >- */ >- for (i = 0; i < 3; i++) { >- if (limited_color_range) >- coeffs[i * 3 + i] = >- ILK_CSC_COEFF_LIMITED_RANGE; >- else >- coeffs[i * 3 + i] = ILK_CSC_COEFF_1_0; >- } >- } > >- ilk_update_pipe_csc(crtc, ilk_csc_off_zero, coeffs, >- limited_color_range ? >- ilk_csc_postoff_limited_range : >- ilk_csc_off_zero); >+ ilk_update_pipe_csc(crtc, ilk_csc_off_zero, coeffs, >+ limited_color_range ? >+ ilk_csc_postoff_limited_range : >+ ilk_csc_off_zero); >+ } else if (limited_color_range) { >+ ilk_update_pipe_csc(crtc, ilk_csc_off_zero, >+ ilk_csc_coeff_limited_range, >+ ilk_csc_postoff_limited_range); >+ } else if (crtc_state->csc_enable) { >+ ilk_update_pipe_csc(crtc, ilk_csc_off_zero, >+ ilk_csc_coeff_identity, >+ ilk_csc_off_zero); >+ } > > I915_WRITE(PIPE_CSC_MODE(pipe), crtc_state->csc_mode); } >-- >2.19.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
