On Thu, May 02, 2019 at 10:40:39AM +0000, Sharma, Shashank wrote: > > > > -----Original Message----- > > From: Ville Syrjälä [mailto:[email protected]] > > Sent: Thursday, May 2, 2019 3:45 PM > > To: Sharma, Shashank <[email protected]> > > Cc: [email protected]; Syrjala, Ville > > <[email protected]>; Lankhorst, > > Maarten <[email protected]> > > Subject: Re: [Intel-gfx] [PATCH] drm/i915/GLK: Properly handle plane CSC for > > BT2020 framebuffers > > > > On Thu, May 02, 2019 at 03:19:42PM +0530, Shashank Sharma wrote: > > > Framebuffer formats P01x are supported by GLK, but the function which > > > handles CSC on plane color control register, still expectes the input > > > buffer to be REC709. This can cause inaccurate output for direct P01x > > > flips. > > > > > > This patch checks if the color_encoding property is set to YCBCR_2020, > > > and enables the corresponding color conversion mode on plane CSC. > > > > > > PS: renamed variable plane_color_ctl to color_ctl for 80 char stuff. > > > > > > Cc: Ville Syrjala <[email protected]> > > > Cc: Maarten Lankhorst <[email protected]> > > > Cc: Uma Shankar <[email protected]> > > > Signed-off-by: Shashank Sharma <[email protected]> > > > --- > > > drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++---------- > > > 1 file changed, 16 insertions(+), 10 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/i915/intel_display.c > > > b/drivers/gpu/drm/i915/intel_display.c > > > index dd65d7c521c1..2d4d3128bf1f 100644 > > > --- a/drivers/gpu/drm/i915/intel_display.c > > > +++ b/drivers/gpu/drm/i915/intel_display.c > > > @@ -3868,24 +3868,30 @@ u32 glk_plane_color_ctl(const struct > > > intel_crtc_state > > *crtc_state, > > > to_i915(plane_state->base.plane->dev); > > > const struct drm_framebuffer *fb = plane_state->base.fb; > > > struct intel_plane *plane = to_intel_plane(plane_state->base.plane); > > > - u32 plane_color_ctl = 0; > > > + u32 color_ctl = 0; > > > > > > - plane_color_ctl |= PLANE_COLOR_PLANE_GAMMA_DISABLE; > > > - plane_color_ctl |= glk_plane_color_ctl_alpha(plane_state); > > > + color_ctl |= PLANE_COLOR_PLANE_GAMMA_DISABLE; > > > + color_ctl |= glk_plane_color_ctl_alpha(plane_state); > > > > > > if (fb->format->is_yuv && !icl_is_hdr_plane(dev_priv, plane->id)) { > > > - if (plane_state->base.color_encoding == DRM_COLOR_YCBCR_BT709) > > > - plane_color_ctl |= > > PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709; > > > - else > > > - plane_color_ctl |= > > PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709; > > > + switch (plane_state->base.color_encoding) { > > > + case DRM_COLOR_YCBCR_BT709: > > > + color_ctl |= > > PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709; > > > + break; > > > + case DRM_COLOR_YCBCR_BT2020: > > > + color_ctl |= > > PLANE_COLOR_CSC_MODE_YUV2020_TO_RGB2020; > > > + break; > > > + default: > > > + color_ctl |= > > PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709; > > > + } > > > > This isn't going to do anything without adjusting the property supported > > encodings as > > well. > > > I might have not understood this comment properly, but, AFAIK, if userspace > sets this property well, and we set this color_ctl bit properly, driver is > setting PLANE_COLOR_CSC_MODE_YUV2020_TO_RGB2020 bits in GLK color control > register. As GLK has a fix function plane CSC, HW will apply a different > matrix internally to convert input buffer to RGB_2020 from YCBCR_2020 > (earlier this would have been YCBCR_709). So I think we should see visible > changes in output. Do you think otherwise ?
The property won't accept the BT2020 value. Or if it does we have a bug somewhere. I guess tests would be nice. Maybe we should extend the kms_plane pixel format tests to check different YCbCr encodings as well? Or maybe Maarten's kms_yuv already tests this? -- Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
