f40ebd6b properly disabled the hsync/vsync logic at disable time, but
neglected to re-enable them at enable time.
v2: In the enable hook, restore the connector's expected DPMS level
instead of forcing ON. Do this by stashing a back pointer to the
connector in the crt (suggested by danvet) since otherwise it's awkward
to look up.
Signed-off-by: Adam Jackson <a...@redhat.com>
---
drivers/gpu/drm/i915/intel_crt.c | 40 +++++++++++++++++-----------------------
1 file changed, 17 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 32a3693..498dafd 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -45,6 +45,9 @@
struct intel_crt {
struct intel_encoder base;
+ /* DPMS state is stored in the connector, which we need in the
+ * encoder's enable/disable callbacks */
+ struct intel_connector *connector;
bool force_hotplug_required;
u32 adpa_reg;
};
@@ -81,29 +84,6 @@ static bool intel_crt_get_hw_state(struct intel_encoder
*encoder,
return true;
}
-static void intel_disable_crt(struct intel_encoder *encoder)
-{
- struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
- struct intel_crt *crt = intel_encoder_to_crt(encoder);
- u32 temp;
-
- temp = I915_READ(crt->adpa_reg);
- temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
- temp &= ~ADPA_DAC_ENABLE;
- I915_WRITE(crt->adpa_reg, temp);
-}
-
-static void intel_enable_crt(struct intel_encoder *encoder)
-{
- struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
- struct intel_crt *crt = intel_encoder_to_crt(encoder);
- u32 temp;
-
- temp = I915_READ(crt->adpa_reg);
- temp |= ADPA_DAC_ENABLE;
- I915_WRITE(crt->adpa_reg, temp);
-}
-
/* Note: The caller is required to filter out dpms modes not supported by the
* platform. */
static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
@@ -135,6 +115,19 @@ static void intel_crt_set_dpms(struct intel_encoder
*encoder, int mode)
I915_WRITE(crt->adpa_reg, temp);
}
+static void intel_disable_crt(struct intel_encoder *encoder)
+{
+ intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void intel_enable_crt(struct intel_encoder *encoder)
+{
+ struct intel_crt *crt = intel_encoder_to_crt(encoder);
+
+ intel_crt_set_dpms(encoder, crt->connector->dpms);
+}
+
+
static void intel_crt_dpms(struct drm_connector *connector, int mode)
{
struct drm_device *dev = connector->dev;
@@ -746,6 +739,7 @@ void intel_crt_init(struct drm_device *dev)
}
connector = &intel_connector->base;
+ crt->connector = connector;
drm_connector_init(dev, &intel_connector->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
--
1.8.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
