On Tue, 2019-06-25 at 17:03 -0700, Matt Roper wrote:
> Although EHL added a third combo PHY, no PHY_MISC register was added
> for
> PHY C. The bspec indicates that there's no need to program the "DE
> to
> IO Comp Pwr Down" setting for this PHY that we usually need to set in
> PHY_MISC.
>
> v2:
> - Add IS_ELKHARTLAKE() guards since future platforms that have a PHY
> C
> are likely to reinstate the PHY_MISC register. (Jose)
> - Use goto's to skip PHY_MISC programming & minimize code deltas.
> (Jose)
I found more registers that also needs the conversion, here a few:
dsi_program_swing_and_deemphasis()
ICL_PORT_TX_DW5_LN0
icl_ddi_combo_vswing_program()
ICL_PORT_TX_DW5_LN0
ICL_PORT_TX_DW4_LN
icl_combo_phy_ddi_vswing_sequence()
ICL_PORT_TX_DW4_LN
ICL_PORT_CL_DW5
ICL_PORT_TX_DW4_LN
ICL_PORT_TX_DW5_GRP
Suggestion: send the other patches separated, merge those patches and
then we work on this one.
>
> Bspec: 33148
> Cc: José Roberto de Souza <jose.so...@intel.com>
> Signed-off-by: Matt Roper <matthew.d.ro...@intel.com>
> ---
> .../gpu/drm/i915/display/intel_combo_phy.c | 28
> +++++++++++++++++--
> 1 file changed, 25 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy.c
> b/drivers/gpu/drm/i915/display/intel_combo_phy.c
> index 075bab2500eb..d3d5244765e6 100644
> --- a/drivers/gpu/drm/i915/display/intel_combo_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_combo_phy.c
> @@ -183,9 +183,13 @@ static void cnl_combo_phys_uninit(struct
> drm_i915_private *dev_priv)
> static bool icl_combo_phy_enabled(struct drm_i915_private *dev_priv,
> enum port port)
> {
> - return !(I915_READ(ICL_PHY_MISC(port)) &
> - ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN) &&
> - (I915_READ(ICL_PORT_COMP_DW0(port)) & COMP_INIT);
> + /* The PHY C added by EHL has no PHY_MISC register */
> + if (IS_ELKHARTLAKE(dev_priv) && port == PORT_C)
> + return I915_READ(ICL_PORT_COMP_DW0(port)) & COMP_INIT;
> + else
> + return !(I915_READ(ICL_PHY_MISC(port)) &
> + ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN) &&
> + (I915_READ(ICL_PORT_COMP_DW0(port)) &
> COMP_INIT);
> }
>
> static bool icl_combo_phy_verify_state(struct drm_i915_private
> *dev_priv,
> @@ -299,6 +303,14 @@ static void icl_combo_phys_init(struct
> drm_i915_private *dev_priv)
> continue;
> }
>
> + /*
> + * Although EHL adds a combo PHY C, there's no PHY_MISC
> + * register for it and no need to program the
> + * DE_IO_COMP_PWR_DOWN setting on PHY C.
> + */
> + if (IS_ELKHARTLAKE(dev_priv) && port == PORT_C)
> + goto skip_phy_misc;
> +
> /*
> * EHL's combo PHY A can be hooked up to either an
> external
> * display (via DDI-D) or an internal display (via DDI-
> A or
> @@ -313,6 +325,7 @@ static void icl_combo_phys_init(struct
> drm_i915_private *dev_priv)
> val &= ~ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
> I915_WRITE(ICL_PHY_MISC(port), val);
>
> +skip_phy_misc:
> cnl_set_procmon_ref_values(dev_priv, port);
>
> if (port == PORT_A) {
> @@ -343,10 +356,19 @@ static void icl_combo_phys_uninit(struct
> drm_i915_private *dev_priv)
> DRM_WARN("Port %c combo PHY HW state changed
> unexpectedly\n",
> port_name(port));
>
> + /*
> + * Although EHL adds a combo PHY C, there's no PHY_MISC
> + * register for it and no need to program the
> + * DE_IO_COMP_PWR_DOWN setting on PHY C.
> + */
> + if (IS_ELKHARTLAKE(dev_priv) && port == PORT_C)
> + goto skip_phy_misc;
> +
> val = I915_READ(ICL_PHY_MISC(port));
> val |= ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
> I915_WRITE(ICL_PHY_MISC(port), val);
>
> +skip_phy_misc:
> val = I915_READ(ICL_PORT_COMP_DW0(port));
> val &= ~COMP_INIT;
> I915_WRITE(ICL_PORT_COMP_DW0(port), val);
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
