>-----Original Message-----
>From: Navare, Manasi D
>Sent: Thursday, July 11, 2019 10:24 AM
>To: Ville Syrjälä <[email protected]>
>Cc: Srivatsa, Anusha <[email protected]>; intel-
>[email protected]
>Subject: Re: [Intel-gfx] [PATCH] drm/dp/dsc: Add Support for all BPCs supported
>by TGL
>
>On Thu, Jul 11, 2019 at 04:47:17PM +0300, Ville Syrjälä wrote:
>> On Wed, Jul 10, 2019 at 04:09:21PM -0700, Anusha Srivatsa wrote:
>> > DSC engine on ICL supports only 8 and 10 BPC as the input BPC. But
>> > DSC engine in TGL supports 8, 10 and 12 BPC.
>> > Add 12 BPC support for DSC while calculating compression
>> > configuration.
>> >
>> > Cc: Manasi Navare <[email protected]>
>> > Signed-off-by: Anusha Srivatsa <[email protected]>
>> > ---
>> > drivers/gpu/drm/i915/display/intel_dp.c | 9 +++++++--
>> > 1 file changed, 7 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
>> > b/drivers/gpu/drm/i915/display/intel_dp.c
>> > index 0bdb7ecc5a81..cd089643c80d 100644
>> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> > @@ -71,6 +71,7 @@
>> > #define DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER 61440
>> > #define DP_DSC_MIN_SUPPORTED_BPC 8
>> > #define DP_DSC_MAX_SUPPORTED_BPC 10
>> > +#define TGL_DP_DSC_MAX_SUPPORTED_BPC 12
>>
>> These defines aren't doing any good IMO. I'd just nuke them.
>
>So just remove all the #defines and use the values directly?
Wont it make it less readable?
>>
>> >
>> > /* DP DSC throughput values used for slice count calculations KPixels/s */
>> > #define DP_DSC_PEAK_PIXEL_RATE 2720000
>> > @@ -1911,8 +1912,12 @@ static int intel_dp_dsc_compute_config(struct
>intel_dp *intel_dp,
>> > if (!intel_dp_supports_dsc(intel_dp, pipe_config))
>> > return -EINVAL;
>> >
>> > - dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
>> > - conn_state->max_requested_bpc);
>> > + if (INTEL_GEN(dev_priv) > 11)
>>
>> More customarily >= 12
>
>I agree
Makes sense.
Anusha
>Manasi
>
>>
>> > + dsc_max_bpc = min_t(u8, TGL_DP_DSC_MAX_SUPPORTED_BPC,
>> > + conn_state->max_requested_bpc);
>> > + else
>> > + dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
>> > + conn_state->max_requested_bpc);
>> >
>> > pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, dsc_max_bpc);
>> > if (pipe_bpp < DP_DSC_MIN_SUPPORTED_BPC * 3) {
>> > --
>> > 2.21.0
>> >
>> > _______________________________________________
>> > Intel-gfx mailing list
>> > [email protected]
>> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>>
>> --
>> Ville Syrjälä
>> Intel
>> _______________________________________________
>> Intel-gfx mailing list
>> [email protected]
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
