If we ever leak a non-DP compliant port width through here, we have a
pretty serious issue. So just rip out all these WARNs - if we need
them it's probably better to have them at a central place where we
compute the dp lane count.

Also use the new DDI width macro for FDI mode.

Cc: Paulo Zanoni <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h  | 11 ++---------
 drivers/gpu/drm/i915/intel_ddi.c | 34 ++--------------------------------
 drivers/gpu/drm/i915/intel_dp.c  | 12 +-----------
 3 files changed, 5 insertions(+), 52 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 95ae5cf..d84d694 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2664,9 +2664,7 @@
 #define   DP_PRE_EMPHASIS_SHIFT                22
 
 /* How many wires to use. I guess 3 was too hard */
-#define   DP_PORT_WIDTH_1              (0 << 19)
-#define   DP_PORT_WIDTH_2              (1 << 19)
-#define   DP_PORT_WIDTH_4              (3 << 19)
+#define   DP_PORT_WIDTH(width)         (((width) - 1) << 19)
 #define   DP_PORT_WIDTH_MASK           (7 << 19)
 
 /* Mystic DPCD version 1.1 special mode */
@@ -4751,9 +4749,6 @@
 #define  TRANS_DDI_EDP_INPUT_B_ONOFF   (5<<12)
 #define  TRANS_DDI_EDP_INPUT_C_ONOFF   (6<<12)
 #define  TRANS_DDI_BFI_ENABLE          (1<<4)
-#define  TRANS_DDI_PORT_WIDTH_X1       (0<<1)
-#define  TRANS_DDI_PORT_WIDTH_X2       (1<<1)
-#define  TRANS_DDI_PORT_WIDTH_X4       (3<<1)
 
 /* DisplayPort Transport Control */
 #define DP_TP_CTL_A                    0x64040
@@ -4797,9 +4792,7 @@
 #define  DDI_BUF_PORT_REVERSAL                 (1<<16)
 #define  DDI_BUF_IS_IDLE                       (1<<7)
 #define  DDI_A_4_LANES                         (1<<4)
-#define  DDI_PORT_WIDTH_X1                     (0<<1)
-#define  DDI_PORT_WIDTH_X2                     (1<<1)
-#define  DDI_PORT_WIDTH_X4                     (3<<1)
+#define  DDI_PORT_WIDTH(width)                 (((width) - 1) << 1)
 #define  DDI_INIT_DISPLAY_DETECTED             (1<<0)
 
 /* DDI Buffer Translations */
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 72941f9..841c9a9 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -687,22 +687,7 @@ static void intel_ddi_mode_set(struct drm_encoder *encoder,
 
                intel_dp->DP = intel_dig_port->port_reversal |
                               DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
-               switch (intel_dp->lane_count) {
-               case 1:
-                       intel_dp->DP |= DDI_PORT_WIDTH_X1;
-                       break;
-               case 2:
-                       intel_dp->DP |= DDI_PORT_WIDTH_X2;
-                       break;
-               case 4:
-                       intel_dp->DP |= DDI_PORT_WIDTH_X4;
-                       break;
-               default:
-                       intel_dp->DP |= DDI_PORT_WIDTH_X4;
-                       WARN(1, "Unexpected DP lane count %d\n",
-                            intel_dp->lane_count);
-                       break;
-               }
+               intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
 
                if (intel_dp->has_audio) {
                        DRM_DEBUG_DRIVER("DP audio on pipe %c on DDI\n",
@@ -1031,22 +1016,7 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc 
*crtc)
 
                temp |= TRANS_DDI_MODE_SELECT_DP_SST;
 
-               switch (intel_dp->lane_count) {
-               case 1:
-                       temp |= TRANS_DDI_PORT_WIDTH_X1;
-                       break;
-               case 2:
-                       temp |= TRANS_DDI_PORT_WIDTH_X2;
-                       break;
-               case 4:
-                       temp |= TRANS_DDI_PORT_WIDTH_X4;
-                       break;
-               default:
-                       temp |= TRANS_DDI_PORT_WIDTH_X4;
-                       WARN(1, "Unsupported lane count %d\n",
-                            intel_dp->lane_count);
-               }
-
+               intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
        } else {
                WARN(1, "Invalid encoder type %d for pipe %c\n",
                     intel_encoder->type, pipe_name(pipe));
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 8759fb1..99f798a 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -891,18 +891,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct 
drm_display_mode *mode,
 
        /* Handle DP bits in common between all three register formats */
        intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
+       intel_dp->DP |= DP_PORT_WIDTH(intel_dp->lane_count);
 
-       switch (intel_dp->lane_count) {
-       case 1:
-               intel_dp->DP |= DP_PORT_WIDTH_1;
-               break;
-       case 2:
-               intel_dp->DP |= DP_PORT_WIDTH_2;
-               break;
-       case 4:
-               intel_dp->DP |= DP_PORT_WIDTH_4;
-               break;
-       }
        if (intel_dp->has_audio) {
                DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
                                 pipe_name(intel_crtc->pipe));
-- 
1.7.11.7

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to