> -----Original Message-----
> From: C, Ramalingam <[email protected]>
> Sent: Wednesday, October 16, 2019 3:45 PM
> To: Kulkarni, Vandita <[email protected]>
> Cc: [email protected]; Nikula, Jani <[email protected]>
> Subject: Re: [Intel-gfx] [RFC 7/7] drm/i915/dsi: Initiate frame request in cmd
> mode
>
> On 2019-10-14 at 16:31:22 +0530, Vandita Kulkarni wrote:
> > In TE Gate mode, on every flip we need to set the frame update request
> > bit. After this bit is set transcoder hardware will automatically
> > send the frame data to the panel when it receives the TE event.
> >
> > Signed-off-by: Vandita Kulkarni <[email protected]>
> > ---
> > drivers/gpu/drm/i915/display/icl_dsi.c | 27 +++++++++++++++++++
> > drivers/gpu/drm/i915/display/intel_display.c | 16 +++++++++++
> > .../drm/i915/display/intel_display_types.h | 3 +++
> > drivers/gpu/drm/i915/display/intel_dsi.h | 3 +++
> > 4 files changed, 49 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c
> > b/drivers/gpu/drm/i915/display/icl_dsi.c
> > index 877746416e52..c72917ddf8e7 100644
> > --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> > +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> > @@ -90,6 +90,33 @@ struct intel_encoder
> *gen11_dsi_find_cmd_mode_encoder(struct intel_crtc *crtc)
> > return NULL;
> > }
> >
> > +void gen11_dsi_check_frame_update_needed(struct intel_crtc *intel_crtc,
> > + struct intel_crtc_state *crtc_state)
>
> > +{
> > + struct intel_encoder *intel_encoder = NULL;
> > +
> > + intel_encoder = gen11_dsi_find_cmd_mode_encoder(intel_crtc);
> > + if (!intel_encoder)
> > + return;
> In this func, if you could find a DSI encoder with CMD mode, you set the
> flag!?
Yes, the requirement is to set this frame update bit on every flip.
Like Jani has commented on patch 4 where this parsing function is defined, will
need to reconsider and replace with a better solution.
Working on it.
Thanks,
Vandita
> > +
> > + /* TBD Use bits to say update on which dsi port instead of a bool */
> > + crtc_state->dsi_frame_update = true; }
> > +
> > +void gen11_dsi_frame_update(struct intel_crtc_state *crtc_state) {
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > + u32 tmp;
> > +
> > + /* TBD: add check on port */
> > + if (crtc_state->dsi_frame_update) {
> > + tmp = I915_READ(ICL_DSI_CMD_FRMCTL(PORT_A));
> > + tmp |= ICL_FRAME_UPDATE_REQUEST;
> > + I915_WRITE(ICL_DSI_CMD_FRMCTL(PORT_A), tmp);
> > + }
> > +}
> > +
> > static void wait_for_cmds_dispatched_to_panel(struct intel_encoder
> > *encoder) {
> > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); diff
> > --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index 3cf39fc153b3..a902bb2bf075 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -11858,6 +11858,11 @@ static int intel_crtc_atomic_check(struct
> drm_crtc *_crtc,
> > crtc_state);
> > }
> >
> > + if ((INTEL_GEN(dev_priv) >= 11) &&
> > + (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI))) {
> Please check this alignment too
>
> -Ram
> > + gen11_dsi_check_frame_update_needed(crtc, crtc_state);
> > + }
> > +
> > if (HAS_IPS(dev_priv))
> > crtc_state->ips_enabled =
> hsw_compute_ips_config(crtc_state);
> >
> > @@ -13618,6 +13623,7 @@ static int intel_atomic_check(struct
> drm_device *dev,
> > if (ret)
> > goto fail;
> >
> > +
> > for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> > new_crtc_state, i) {
> > if (!needs_modeset(new_crtc_state) && @@ -14108,6
> +14114,16 @@
> > static void intel_atomic_commit_tail(struct intel_atomic_state *state)
> > intel_color_load_luts(new_crtc_state);
> > }
> >
> > + /*
> > + * Incase of mipi dsi command mode, we need to set frame update
> > + * for every commit
> > + */
> > + for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> > + if (new_crtc_state->base.active &&
> > + !needs_modeset(new_crtc_state) &&
> > + new_crtc_state->dsi_frame_update)
> > + gen11_dsi_frame_update(new_crtc_state);
> > + }
> > /*
> > * Now that the vblank has passed, we can go ahead and program
> the
> > * optimal watermarks on platforms that need two-step watermark
> diff
> > --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index 40390d855815..69da4ec45691 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -991,6 +991,9 @@ struct intel_crtc_state {
> >
> > /* Forward Error correction State */
> > bool fec_enable;
> > +
> > + /* frame update for dsi command mode */
> > + bool dsi_frame_update;
> > };
> >
> > struct intel_crtc {
> > diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h
> > b/drivers/gpu/drm/i915/display/intel_dsi.h
> > index 071dad7ee04a..d9350b842115 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dsi.h
> > +++ b/drivers/gpu/drm/i915/display/intel_dsi.h
> > @@ -203,6 +203,9 @@ void bxt_dsi_reset_clocks(struct intel_encoder
> > *encoder, enum port port);
> >
> > /* icl_dsi.c */
> > struct intel_encoder *gen11_dsi_find_cmd_mode_encoder(struct
> > intel_crtc *crtc);
> > +void gen11_dsi_check_frame_update_needed(struct intel_crtc *crtc,
> > + struct intel_crtc_state *crtc_state);
> void
> > +gen11_dsi_frame_update(struct intel_crtc_state *crtc_state);
> >
> > /* intel_dsi_vbt.c */
> > bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id);
> > --
> > 2.21.0.5.gaeb582a
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > [email protected]
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
