On Thu, Nov 14, 2019 at 05:05:16PM +0100, Maarten Lankhorst wrote:
> When the clock is higher than the dotclock, try with 2 pipes enabled.
> If we can enable 2, then we will go into big joiner mode, and steal
> the adjacent crtc.
> 
> This only links the crtc's in software, no hardware or plane
> programming is done yet. Blobs are also copied from the master's
> crtc_state, so it doesn't depend at commit time on the other
> crtc_state.
> 
> Changes since v1:
> - Rename pipe timings to transcoder timings, as they are now different.
> Changes since v2:
> - Rework bigjoiner checks; always disable slave when recalculating
>   master. No need to have a separate bigjoiner pass any more.
> - Use pipe_mode instead of transcoder_mode, to clean up the code.
> 
> Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_atomic.c   |   9 +-
>  drivers/gpu/drm/i915/display/intel_atomic.h   |   3 +-
>  drivers/gpu/drm/i915/display/intel_display.c  | 198 ++++++++++++++++--
>  .../drm/i915/display/intel_display_types.h    |   9 +
>  drivers/gpu/drm/i915/display/intel_dp.c       |  22 +-
>  5 files changed, 207 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_atomic.c 
> b/drivers/gpu/drm/i915/display/intel_atomic.c
> index fd0026fc3618..b5c17d8c0208 100644
> --- a/drivers/gpu/drm/i915/display/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/display/intel_atomic.c
> @@ -229,14 +229,15 @@ void intel_crtc_free_hw_state(struct intel_crtc_state 
> *crtc_state)
>       intel_crtc_put_color_blobs(crtc_state);
>  }
>  
> -void intel_crtc_copy_color_blobs(struct intel_crtc_state *crtc_state)
> +void intel_crtc_copy_color_blobs(struct intel_crtc_state *crtc_state,
> +                              const struct intel_crtc_state *from_crtc_state)
>  {
>       drm_property_replace_blob(&crtc_state->hw.degamma_lut,
> -                               crtc_state->uapi.degamma_lut);
> +                               from_crtc_state->uapi.degamma_lut);
>       drm_property_replace_blob(&crtc_state->hw.gamma_lut,
> -                               crtc_state->uapi.gamma_lut);
> +                               from_crtc_state->uapi.gamma_lut);
>       drm_property_replace_blob(&crtc_state->hw.ctm,
> -                               crtc_state->uapi.ctm);
> +                               from_crtc_state->uapi.ctm);
>  }
>  
>  /**
> diff --git a/drivers/gpu/drm/i915/display/intel_atomic.h 
> b/drivers/gpu/drm/i915/display/intel_atomic.h
> index 7b49623419ba..e64473227285 100644
> --- a/drivers/gpu/drm/i915/display/intel_atomic.h
> +++ b/drivers/gpu/drm/i915/display/intel_atomic.h
> @@ -37,7 +37,8 @@ struct drm_crtc_state *intel_crtc_duplicate_state(struct 
> drm_crtc *crtc);
>  void intel_crtc_destroy_state(struct drm_crtc *crtc,
>                              struct drm_crtc_state *state);
>  void intel_crtc_free_hw_state(struct intel_crtc_state *crtc_state);
> -void intel_crtc_copy_color_blobs(struct intel_crtc_state *crtc_state);
> +void intel_crtc_copy_color_blobs(struct intel_crtc_state *crtc_state,
> +                              const struct intel_crtc_state 
> *from_crtc_state);
>  struct drm_atomic_state *intel_atomic_state_alloc(struct drm_device *dev);
>  void intel_atomic_state_clear(struct drm_atomic_state *state);
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c 
> b/drivers/gpu/drm/i915/display/intel_display.c
> index 7a6da85823af..2dc63ef5caf8 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -7576,9 +7576,25 @@ static int intel_crtc_compute_config(struct intel_crtc 
> *crtc,
>                                    struct intel_crtc_state *pipe_config)
>  {
>       struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> -     const struct drm_display_mode *pipe_mode = &pipe_config->hw.pipe_mode;
> +     struct drm_display_mode *pipe_mode = &pipe_config->hw.pipe_mode;
>       int clock_limit = dev_priv->max_dotclk_freq;
>  
> +     *pipe_mode = pipe_config->hw.adjusted_mode;
> +
> +     /* Adjust pipe_mode for bigjoiner, with half the horizontal mode */
> +     if (pipe_config->bigjoiner) {
> +             pipe_mode->crtc_clock /= 2;
> +             pipe_mode->crtc_hdisplay /= 2;
> +             pipe_mode->crtc_hblank_start /= 2;
> +             pipe_mode->crtc_hblank_end /= 2;
> +             pipe_mode->crtc_hsync_start /= 2;
> +             pipe_mode->crtc_hsync_end /= 2;
> +             pipe_mode->crtc_htotal /= 2;
> +             pipe_mode->crtc_hskew /= 2;
> +
> +             pipe_config->pipe_src_w /= 2;
> +     }
> +
>       if (INTEL_GEN(dev_priv) < 4) {
>               clock_limit = dev_priv->max_cdclk_freq * 9 / 10;
>  
> @@ -7635,7 +7651,7 @@ static int intel_crtc_compute_config(struct intel_crtc 
> *crtc,
>        * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
>        */
>       if ((INTEL_GEN(dev_priv) > 4 || IS_G4X(dev_priv)) &&
> -             pipe_mode->crtc_hsync_start == pipe_mode->crtc_hdisplay)
> +         pipe_config->hw.adjusted_mode.crtc_hsync_start == 
> pipe_mode->crtc_hdisplay)

A bit inconsistent now.

>               return -EINVAL;
>  
>       intel_crtc_compute_pixel_rate(pipe_config);
> @@ -11921,7 +11937,7 @@ static bool encoders_cloneable(const struct 
> intel_encoder *a,
>                         b->cloneable & (1 << a->type));
>  }
>  
> -static bool check_single_encoder_cloning(struct drm_atomic_state *state,
> +static bool check_single_encoder_cloning(struct intel_atomic_state *state,
>                                        struct intel_crtc *crtc,
>                                        struct intel_encoder *encoder)
>  {
> @@ -11930,7 +11946,7 @@ static bool check_single_encoder_cloning(struct 
> drm_atomic_state *state,
>       struct drm_connector_state *connector_state;
>       int i;
>  
> -     for_each_new_connector_in_state(state, connector, connector_state, i) {
> +     for_each_new_connector_in_state(&state->base, connector, 
> connector_state, i) {
>               if (connector_state->crtc != &crtc->base)
>                       continue;
>  
> @@ -12167,6 +12183,7 @@ static int intel_crtc_atomic_check(struct 
> intel_atomic_state *state,
>  
>       if (mode_changed && crtc_state->hw.enable &&
>           dev_priv->display.crtc_compute_clock &&
> +         !crtc_state->bigjoiner_slave &&

Why do we need this? Wouldn't we just end up sharing the same DPLL
for both pipes anyway?

>           !WARN_ON(crtc_state->shared_dpll)) {
>               ret = dev_priv->display.crtc_compute_clock(crtc, crtc_state);
>               if (ret)
> @@ -12627,18 +12644,31 @@ static bool check_digital_port_conflicts(struct 
> intel_atomic_state *state)
>  }
>  
>  static void
> -intel_crtc_copy_uapi_to_hw_state_nomodeset(struct intel_crtc_state 
> *crtc_state)
> +intel_crtc_copy_uapi_to_hw_state_nomodeset(struct intel_atomic_state *state,
> +                                        struct intel_crtc_state *crtc_state)
>  {
> -     intel_crtc_copy_color_blobs(crtc_state);
> +     const struct intel_crtc_state *from_crtc_state = crtc_state;
> +
> +     if (crtc_state->bigjoiner_slave) {
> +             from_crtc_state = intel_atomic_get_new_crtc_state(state,
> +                                     crtc_state->bigjoiner_linked_crtc);
> +
> +             /* No need to copy state if the master state is unchanged */
> +             if (!from_crtc_state)
> +                     return;
> +     }
> +
> +     intel_crtc_copy_color_blobs(crtc_state, from_crtc_state);
>  }
>  
>  static void
> -intel_crtc_copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)
> +intel_crtc_copy_uapi_to_hw_state(struct intel_atomic_state *state,
> +                              struct intel_crtc_state *crtc_state)
>  {
>       crtc_state->hw.enable = crtc_state->uapi.enable;
>       crtc_state->hw.active = crtc_state->uapi.active;
>       crtc_state->hw.pipe_mode = crtc_state->hw.adjusted_mode = 
> crtc_state->uapi.adjusted_mode;
> -     intel_crtc_copy_uapi_to_hw_state_nomodeset(crtc_state);
> +     intel_crtc_copy_uapi_to_hw_state_nomodeset(state, crtc_state);
>  }
>  
>  static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state 
> *crtc_state,
> @@ -12660,7 +12690,49 @@ static void intel_crtc_copy_hw_to_uapi_state(struct 
> intel_crtc_state *crtc_state
>  }
>  
>  static int
> -intel_crtc_prepare_cleared_state(struct intel_crtc_state *crtc_state)
> +copy_bigjoiner_crtc_state(struct intel_crtc_state *crtc_state,
> +                       const struct intel_crtc_state *from_crtc_state)
> +{
> +     struct intel_crtc_state *saved_state;
> +     struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +
> +     saved_state = kmemdup(from_crtc_state, sizeof(*saved_state), 
> GFP_KERNEL);
> +     if (!saved_state)
> +             return -ENOMEM;
> +
> +     saved_state->uapi = crtc_state->uapi;
> +     saved_state->scaler_state = crtc_state->scaler_state;
> +     saved_state->shared_dpll = crtc_state->shared_dpll;
> +     saved_state->dpll_hw_state = crtc_state->dpll_hw_state;
> +     saved_state->crc_enabled = crtc_state->crc_enabled;
> +
> +     intel_crtc_free_hw_state(crtc_state);
> +     memcpy(crtc_state, saved_state, sizeof(*crtc_state));
> +     kfree(saved_state);
> +
> +     /* Re-init hw state */
> +     memset(&crtc_state->hw, 0, sizeof(saved_state->hw));
> +     crtc_state->hw.enable = from_crtc_state->hw.enable;
> +     crtc_state->hw.active = from_crtc_state->hw.active;
> +     crtc_state->hw.pipe_mode = from_crtc_state->hw.pipe_mode;
> +     crtc_state->hw.adjusted_mode = from_crtc_state->hw.adjusted_mode;
> +
> +     /* Some fixups */
> +     crtc_state->uapi.mode_changed = from_crtc_state->uapi.mode_changed;
> +     crtc_state->uapi.connectors_changed = 
> from_crtc_state->uapi.connectors_changed;
> +     crtc_state->uapi.active_changed = from_crtc_state->uapi.active_changed;
> +     crtc_state->nv12_planes = crtc_state->c8_planes = 
> crtc_state->update_planes = 0;
> +     crtc_state->bigjoiner_linked_crtc = 
> to_intel_crtc(from_crtc_state->uapi.crtc);
> +     crtc_state->bigjoiner_slave = true;
> +     crtc_state->cpu_transcoder = (enum transcoder)crtc->pipe;
> +     crtc_state->has_audio = false;
> +
> +     return 0;
> +}
> +
> +static int
> +intel_crtc_prepare_cleared_state(struct intel_atomic_state *state,
> +                              struct intel_crtc_state *crtc_state)
>  {
>       struct drm_i915_private *dev_priv =
>               to_i915(crtc_state->uapi.crtc->dev);
> @@ -12703,16 +12775,16 @@ intel_crtc_prepare_cleared_state(struct 
> intel_crtc_state *crtc_state)
>       crtc_state->uapi.mode.private_flags = 0;
>       crtc_state->uapi.adjusted_mode.private_flags = 0;
>  
> -     intel_crtc_copy_uapi_to_hw_state(crtc_state);
> +     intel_crtc_copy_uapi_to_hw_state(state, crtc_state);
>  
>       return 0;
>  }
>  
>  static int
> -intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
> +intel_modeset_pipe_config(struct intel_atomic_state *state,
> +                       struct intel_crtc_state *pipe_config)
>  {
>       struct drm_crtc *crtc = pipe_config->uapi.crtc;
> -     struct drm_atomic_state *state = pipe_config->uapi.state;
>       struct intel_encoder *encoder;
>       struct drm_connector *connector;
>       struct drm_connector_state *connector_state;
> @@ -12755,7 +12827,7 @@ intel_modeset_pipe_config(struct intel_crtc_state 
> *pipe_config)
>                              &pipe_config->pipe_src_w,
>                              &pipe_config->pipe_src_h);
>  
> -     for_each_new_connector_in_state(state, connector, connector_state, i) {
> +     for_each_new_connector_in_state(&state->base, connector, 
> connector_state, i) {
>               if (connector_state->crtc != crtc)
>                       continue;
>  
> @@ -12800,7 +12872,7 @@ intel_modeset_pipe_config(struct intel_crtc_state 
> *pipe_config)
>        * adjust it according to limitations or connector properties, and also
>        * a chance to reject the mode entirely.
>        */
> -     for_each_new_connector_in_state(state, connector, connector_state, i) {
> +     for_each_new_connector_in_state(&state->base, connector, 
> connector_state, i) {
>               if (connector_state->crtc != crtc)
>                       continue;
>  
> @@ -12853,8 +12925,6 @@ intel_modeset_pipe_config(struct intel_crtc_state 
> *pipe_config)
>        */
>       pipe_config->uapi.adjusted_mode = pipe_config->hw.adjusted_mode;
>  
> -     /* without bigjoiner, pipe_mode == adjusted_mode */
> -     pipe_config->hw.pipe_mode = pipe_config->hw.adjusted_mode;
>       return 0;
>  }
>  
> @@ -14091,6 +14161,74 @@ static int intel_atomic_check_crtcs(struct 
> intel_atomic_state *state)
>       return 0;
>  }
>  
> +static int intel_atomic_check_bigjoiner(struct intel_atomic_state *state,
> +                                     struct intel_crtc *crtc,
> +                                     struct intel_crtc_state *old_crtc_state,
> +                                     struct intel_crtc_state *new_crtc_state)
> +{
> +     struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> +     struct intel_crtc_state *slave_crtc_state, *master_crtc_state;
> +     struct intel_crtc *slave, *master;
> +
> +     /* slave being enabled, is master is still claiming this crtc? */
> +     if (old_crtc_state->bigjoiner_slave) {
> +             slave = crtc;
> +             master = old_crtc_state->bigjoiner_linked_crtc;
> +             master_crtc_state = intel_atomic_get_new_crtc_state(state, 
> master);
> +             if (!master_crtc_state || !needs_modeset(master_crtc_state))
> +                     goto claimed;
> +     }
> +
> +     if (!new_crtc_state->bigjoiner)
> +             return 0;
> +
> +     if (1 + crtc->pipe >= INTEL_NUM_PIPES(dev_priv)) {
> +             DRM_DEBUG_KMS("[CRTC:%d:%s] Big joiner configuration requires "
> +                           "CRTC + 1 to be used, doesn't exist\n",
> +                           crtc->base.base.id, crtc->base.name);
> +             return -EINVAL;
> +     }
> +
> +     slave = new_crtc_state->bigjoiner_linked_crtc =
> +             intel_get_crtc_for_pipe(dev_priv, crtc->pipe + 1);
> +     slave_crtc_state = intel_atomic_get_crtc_state(&state->base, slave);
> +     master = crtc;
> +     if (IS_ERR(slave_crtc_state))
> +             return PTR_ERR(slave_crtc_state);
> +
> +     /* master being enabled, slave was already configured? */
> +     if (slave_crtc_state->uapi.enable)
> +             goto claimed;
> +
> +     DRM_DEBUG_KMS("[CRTC:%d:%s] Used as slave for big joiner\n",
> +                   slave->base.base.id, slave->base.name);
> +     return copy_bigjoiner_crtc_state(slave_crtc_state, new_crtc_state);
> +
> +claimed:
> +     DRM_DEBUG_KMS("[CRTC:%d:%s] Slave is enabled as normal CRTC, but "
> +                   "[CRTC:%d:%s] claiming this CRTC for bigjoiner.\n",
> +                   slave->base.base.id, slave->base.name,
> +                   master->base.base.id, master->base.name);
> +     return -EINVAL;
> +}
> +
> +static int kill_bigjoiner_slave(struct intel_atomic_state *state,
> +                             struct intel_crtc_state *master_crtc_state)
> +{
> +     struct intel_crtc_state *slave_crtc_state =
> +             intel_atomic_get_crtc_state(&state->base,
> +                     master_crtc_state->bigjoiner_linked_crtc);

nit: I'd do this as

struct foo *bar;

bar = whatever();
if (IS_ERR)
        ...

to make it stand out more since that function has some real
side effects.

> +
> +     if (IS_ERR(slave_crtc_state))
> +             return PTR_ERR(slave_crtc_state);
> +
> +     slave_crtc_state->bigjoiner = master_crtc_state->bigjoiner = false;
> +     slave_crtc_state->bigjoiner_slave = master_crtc_state->bigjoiner_slave 
> = false;
> +     slave_crtc_state->bigjoiner_linked_crtc = 
> master_crtc_state->bigjoiner_linked_crtc = NULL;
> +     intel_crtc_copy_uapi_to_hw_state(state, slave_crtc_state);
> +     return 0;
> +}
> +
>  /**
>   * intel_atomic_check - validate state object
>   * @dev: drm device
> @@ -14122,23 +14260,31 @@ static int intel_atomic_check(struct drm_device 
> *dev,
>                                           new_crtc_state, i) {
>               if (!needs_modeset(new_crtc_state)) {
>                       /* Light copy */
> -                     
> intel_crtc_copy_uapi_to_hw_state_nomodeset(new_crtc_state);
> +                     intel_crtc_copy_uapi_to_hw_state_nomodeset(state, 
> new_crtc_state);
>  
>                       continue;
>               }
>  
> -             if (!new_crtc_state->uapi.enable) {
> -                     intel_crtc_copy_uapi_to_hw_state(new_crtc_state);
> +             /* Kill old bigjoiner link, we may re-establish afterwards */
> +             if (old_crtc_state->bigjoiner && 
> !old_crtc_state->bigjoiner_slave) {
> +                     ret = kill_bigjoiner_slave(state, new_crtc_state);
> +                     if (ret)
> +                             goto fail;
> +             }
>  
> -                     any_ms = true;
> +             if (!new_crtc_state->uapi.enable) {
> +                     if (!new_crtc_state->bigjoiner_slave) {
> +                             intel_crtc_copy_uapi_to_hw_state(state, 
> new_crtc_state);
> +                             any_ms = true;
> +                     }
>                       continue;
>               }

How does this handle the case where the slave uapi.enable gets
enabled but the master is not part of the state yet?

>  
> -             ret = intel_crtc_prepare_cleared_state(new_crtc_state);
> +             ret = intel_crtc_prepare_cleared_state(state, new_crtc_state);
>               if (ret)
>                       goto fail;
>  
> -             ret = intel_modeset_pipe_config(new_crtc_state);
> +             ret = intel_modeset_pipe_config(state, new_crtc_state);
>               if (ret)
>                       goto fail;
>  
> @@ -14146,6 +14292,10 @@ static int intel_atomic_check(struct drm_device *dev,
>  
>               if (needs_modeset(new_crtc_state))
>                       any_ms = true;
> +
> +             ret = intel_atomic_check_bigjoiner(state, crtc, old_crtc_state, 
> new_crtc_state);
> +             if (ret)
> +                     goto fail;
>       }
>  
>       if (any_ms && !check_digital_port_conflicts(state)) {
> @@ -14350,7 +14500,9 @@ static void intel_update_crtc(struct intel_crtc *crtc,
>  
>       commit_pipe_config(state, old_crtc_state, new_crtc_state);
>  
> -     if (INTEL_GEN(dev_priv) >= 9)
> +     if (new_crtc_state->bigjoiner)
> +             {/* Not supported yet */}
> +     else if (INTEL_GEN(dev_priv) >= 9)
>               skl_update_planes_on_crtc(state, crtc);
>       else
>               i9xx_update_planes_on_crtc(state, crtc);
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h 
> b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 7f46c1646d3f..cf2ecfa17416 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1044,6 +1044,15 @@ struct intel_crtc_state {
>       /* enable pipe csc? */
>       bool csc_enable;
>  
> +     /* enable pipe big joiner? */
> +     bool bigjoiner;
> +
> +     /* big joiner slave crtc? */
> +     bool bigjoiner_slave;
> +
> +     /* linked crtc for bigjoiner, either slave or master */
> +     struct intel_crtc *bigjoiner_linked_crtc;
> +
>       /* Display Stream compression state */
>       struct {
>               bool compression_enable;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c 
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index 9b7df8e85ea2..54fde4c4c4dd 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2147,6 +2147,15 @@ static int intel_dp_dsc_compute_config(struct intel_dp 
> *intel_dp,
>       pipe_config->port_clock = intel_dp->common_rates[limits->max_clock];
>       pipe_config->lane_count = limits->max_lane_count;
>  
> +     if (adjusted_mode->crtc_clock > intel_dp_max_dotclock(intel_dp, false)) 
> {
> +             if (adjusted_mode->crtc_clock > intel_dp_max_dotclock(intel_dp, 
> true)) {
> +                     DRM_DEBUG_KMS("Clock rate too high for big joiner\n");
> +                     return -EINVAL;
> +             }
> +             pipe_config->bigjoiner = true;
> +             DRM_DEBUG_KMS("Using bigjoiner configuration\n");
> +     }
> +
>       if (intel_dp_is_edp(intel_dp)) {
>               pipe_config->dsc.compressed_bpp =
>                       min_t(u16, 
> drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4,
> @@ -2164,12 +2173,12 @@ static int intel_dp_dsc_compute_config(struct 
> intel_dp *intel_dp,
>                                                   pipe_config->lane_count,
>                                                   adjusted_mode->crtc_clock,
>                                                   
> adjusted_mode->crtc_hdisplay,
> -                                                 false);
> +                                                 pipe_config->bigjoiner);
>               dsc_dp_slice_count =
>                       intel_dp_dsc_get_slice_count(intel_dp,
>                                                    adjusted_mode->crtc_clock,
>                                                    
> adjusted_mode->crtc_hdisplay,
> -                                                  false);
> +                                                  pipe_config->bigjoiner);
>               if (!dsc_max_output_bpp || !dsc_dp_slice_count) {
>                       DRM_DEBUG_KMS("Compressed BPP/Slice Count not 
> supported\n");
>                       return -EINVAL;
> @@ -2184,13 +2193,14 @@ static int intel_dp_dsc_compute_config(struct 
> intel_dp *intel_dp,
>        * is greater than the maximum Cdclock and if slice count is even
>        * then we need to use 2 VDSC instances.
>        */
> -     if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq) {
> -             if (pipe_config->dsc.slice_count > 1) {
> -                     pipe_config->dsc.dsc_split = true;
> -             } else {
> +     if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq ||
> +         pipe_config->bigjoiner) {
> +             if (pipe_config->dsc.slice_count < 2) {
>                       DRM_DEBUG_KMS("Cannot split stream to use 2 VDSC 
> instances\n");
>                       return -EINVAL;
>               }
> +
> +             pipe_config->dsc.dsc_split = true;
>       }
>  
>       ret = intel_dsc_compute_params(&dig_port->base, pipe_config);
> -- 
> 2.24.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to