Incomplete since ilk+ support needs proper pch dpll tracking first. SDVO get_config parts based on a patch from Jesse Barnes, but fixed up to actually work.
v2: Make sure that we call encoder->get_config _after_ we get_pipe_config to be consistent in both setup_hw_state and the modeset state checker. Otherwise the clever trick with handling the pixel mutliplier on i915G/GM where the encoder overrides the default value of 1 from the crtc get_pipe_config function doesn't work. Spotted by Imre Deak. v3: Actually cross-check the pixel mutliplier (but not on pch split platforms for now). Now actually also tested on a i915G with a sdvo encoder plugged in. Cc: <[email protected]> Cc: Jesse Barnes <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> --- drivers/gpu/drm/i915/intel_display.c | 38 ++++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_sdvo.c | 30 +++++++++++++++++++++++++++- 2 files changed, 65 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 40d047e..a1a81b4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4962,6 +4962,23 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc, i9xx_get_pfit_config(crtc, pipe_config); + if (INTEL_INFO(dev)->gen >= 4) { + tmp = I915_READ(DPLL_MD(crtc->pipe)); + pipe_config->pixel_multiplier = + ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK) + >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1; + } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) { + tmp = I915_READ(DPLL(crtc->pipe)); + pipe_config->pixel_multiplier = + ((tmp & SDVO_MULTIPLIER_MASK) + >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1; + } else { + /* Note that on i915G/GM the pixel multiplier is in the sdvo + * port and will be fixed up in the encoder->get_config + * function. */ + pipe_config->pixel_multiplier = 1; + } + return true; } @@ -5825,6 +5842,12 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc, FDI_DP_PORT_WIDTH_SHIFT) + 1; ironlake_get_fdi_m_n_config(crtc, pipe_config); + + /* XXX: Can't properly read out the pch dpll pixel multiplier + * since we don't have state tracking for pch clocks yet. */ + pipe_config->pixel_multiplier = 1; + } else { + pipe_config->pixel_multiplier = 1; } intel_get_pipe_timings(crtc, pipe_config); @@ -5959,6 +5982,8 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) && (I915_READ(IPS_CTL) & IPS_ENABLE); + pipe_config->pixel_multiplier = 1; + return true; } @@ -8048,6 +8073,9 @@ intel_pipe_config_compare(struct drm_device *dev, PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_start); PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end); + if (!HAS_PCH_SPLIT(dev)) + PIPE_CONF_CHECK_I(pixel_multiplier); + PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, DRM_MODE_FLAG_INTERLACE); @@ -8169,9 +8197,8 @@ intel_modeset_check_state(struct drm_device *dev) enabled = true; if (encoder->connectors_active) active = true; - if (encoder->get_config) - encoder->get_config(encoder, &pipe_config); } + WARN(active != crtc->active, "crtc's computed active state doesn't match tracked active state " "(expected %i, found %i)\n", active, crtc->active); @@ -8181,6 +8208,13 @@ intel_modeset_check_state(struct drm_device *dev) active = dev_priv->display.get_pipe_config(crtc, &pipe_config); + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + if (encoder->base.crtc != &crtc->base) + continue; + if (encoder->get_config) + encoder->get_config(encoder, &pipe_config); + } /* hw state is inconsistent with the pipe A quirk */ if (crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 820f1ae..d4560ad 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1313,9 +1313,13 @@ static bool intel_sdvo_get_hw_state(struct intel_encoder *encoder, static void intel_sdvo_get_config(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config) { + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base); struct intel_sdvo_dtd dtd; - u32 flags = 0; + int encoder_pixel_multiplier = 0; + u32 flags = 0, sdvox; + u8 val; bool ret; ret = intel_sdvo_get_input_timing(intel_sdvo, &dtd); @@ -1335,6 +1339,30 @@ static void intel_sdvo_get_config(struct intel_encoder *encoder, flags |= DRM_MODE_FLAG_NVSYNC; pipe_config->adjusted_mode.flags |= flags; + + if (IS_I915G(dev) || IS_I915GM(dev)) { + sdvox = I915_READ(intel_sdvo->sdvo_reg); + pipe_config->pixel_multiplier = + ((sdvox & SDVO_PORT_MULTIPLY_MASK) + >> SDVO_PORT_MULTIPLY_SHIFT) + 1; + } + + /* Cross check the port pixel multiplier with the sdvo encoder state. */ + intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_CLOCK_RATE_MULT, &val, 1); + switch (val) { + case SDVO_CLOCK_RATE_MULT_1X: + encoder_pixel_multiplier = 1; + break; + case SDVO_CLOCK_RATE_MULT_2X: + encoder_pixel_multiplier = 2; + break; + case SDVO_CLOCK_RATE_MULT_4X: + encoder_pixel_multiplier = 4; + break; + } + WARN(encoder_pixel_multiplier != pipe_config->pixel_multiplier, + "SDVO pixel multiplier mismatch, port: %i, encoder: %i\n", + pipe_config->pixel_multiplier, encoder_pixel_multiplier); } static void intel_disable_sdvo(struct intel_encoder *encoder) -- 1.7.11.7 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
