> -----Original Message-----
> From: Nautiyal, Ankit K <ankit.k.nauti...@intel.com>
> Sent: Tuesday, December 8, 2020 1:22 PM
> To: intel-gfx@lists.freedesktop.org
> Cc: dri-de...@lists.freedesktop.org; Shankar, Uma <uma.shan...@intel.com>;
> airl...@linux.ie; jani.nik...@linux.intel.com; ville.syrj...@linux.intel.com;
> Kulkarni, Vandita <vandita.kulka...@intel.com>; Sharma, Swati2
> <swati2.sha...@intel.com>
> Subject: [PATCH v4 13/16] drm/i915: Add helper functions for calculating DSC
> parameters for HDMI2.1
>
> The DP-HDMI2.1 PCON spec provides way for a source to set PPS
> parameters: slice height, slice width and bits_per_pixel, based on the HDMI2.1
> sink capabilities. The DSC encoder of the PCON will respect these parameters,
> while preparing the 128 byte PPS.
>
> This patch adds helper functions to calculate these PPS paremeters as per the
> HDMI2.1 specification.
>
> v2: Addressed review comments given by Uma Shankar:
> -added documentation for functions
> -fixed typos and errors
Looks good to me.
Reviewed-by: Uma Shankar <uma.shan...@intel.com>
> Signed-off-by: Ankit Nautiyal <ankit.k.nauti...@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_hdmi.c | 233 ++++++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_hdmi.h | 7 +
> 2 files changed, 240 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c
> b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index e10fdb369daa..41eb1c175a0e 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -3428,3 +3428,236 @@ void intel_hdmi_init(struct drm_i915_private
> *dev_priv,
> dig_port->aux_ch = intel_bios_port_aux_ch(dev_priv, port);
> intel_hdmi_init_connector(dig_port, intel_connector); }
> +
> +/*
> + * intel_hdmi_dsc_get_slice_height - get the dsc slice_height
> + * @vactive: Vactive of a display mode
> + *
> + * @return: appropriate dsc slice height for a given mode.
> + */
> +int intel_hdmi_dsc_get_slice_height(int vactive) {
> + int slice_height;
> +
> + /*
> + * Slice Height determination : HDMI2.1 Section 7.7.5.2
> + * Select smallest slice height >=96, that results in a valid PPS and
> + * requires minimum padding lines required for final slice.
> + *
> + * Assumption : Vactive is even.
> + */
> + for (slice_height = 96; slice_height <= vactive; slice_height += 2)
> + if (vactive % slice_height == 0)
> + return slice_height;
> +
> + return 0;
> +}
> +
> +/*
> + * intel_hdmi_dsc_get_num_slices - get no. of dsc slices based on dsc
> +encoder
> + * and dsc decoder capabilites
> + *
> + * @crtc_state: intel crtc_state
> + * @src_max_slices: maximum slices supported by the DSC encoder
> + * @src_max_slice_width: maximum slice width supported by DSC encoder
> + * @hdmi_max_slices: maximum slices supported by sink DSC decoder
> + * @hdmi_throughput: maximum clock per slice (MHz) supported by HDMI
> +sink
> + *
> + * @return: num of dsc slices that can be supported by the dsc encoder
> + * and decoder.
> + */
> +int
> +intel_hdmi_dsc_get_num_slices(const struct intel_crtc_state *crtc_state,
> + int src_max_slices, int src_max_slice_width,
> + int hdmi_max_slices, int hdmi_throughput) {
> +/* Pixel rates in KPixels/sec */
> +#define HDMI_DSC_PEAK_PIXEL_RATE 2720000
> +/*
> + * Rates at which the source and sink are required to process pixels in
> +each
> + * slice, can be two levels: either atleast 340000KHz or atleast 40000KHz.
> + */
> +#define HDMI_DSC_MAX_ENC_THROUGHPUT_0 340000
> +#define HDMI_DSC_MAX_ENC_THROUGHPUT_1 400000
> +
> +/* Spec limits the slice width to 2720 pixels */
> +#define MAX_HDMI_SLICE_WIDTH 2720
> + int kslice_adjust;
> + int adjusted_clk_khz;
> + int min_slices;
> + int target_slices;
> + int max_throughput; /* max clock freq. in khz per slice */
> + int max_slice_width;
> + int slice_width;
> + int pixel_clock = crtc_state->hw.adjusted_mode.crtc_clock;
> +
> + if (!hdmi_throughput)
> + return 0;
> +
> + /*
> + * Slice Width determination : HDMI2.1 Section 7.7.5.1
> + * kslice_adjust factor for 4:2:0, and 4:2:2 formats is 0.5, where as
> + * for 4:4:4 is 1.0. Multiplying these factors by 10 and later
> + * dividing adjusted clock value by 10.
> + */
> + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 ||
> + crtc_state->output_format == INTEL_OUTPUT_FORMAT_RGB)
> + kslice_adjust = 10;
> + else
> + kslice_adjust = 5;
> +
> + /*
> + * As per spec, the rate at which the source and the sink process
> + * the pixels per slice are at two levels: atleast 340Mhz or 400Mhz.
> + * This depends upon the pixel clock rate and output formats
> + * (kslice adjust).
> + * If pixel clock * kslice adjust >= 2720MHz slices can be processed
> + * at max 340MHz, otherwise they can be processed at max 400MHz.
> + */
> +
> + adjusted_clk_khz = DIV_ROUND_UP(kslice_adjust * pixel_clock, 10);
> +
> + if (adjusted_clk_khz <= HDMI_DSC_PEAK_PIXEL_RATE)
> + max_throughput = HDMI_DSC_MAX_ENC_THROUGHPUT_0;
> + else
> + max_throughput = HDMI_DSC_MAX_ENC_THROUGHPUT_1;
> +
> + /*
> + * Taking into account the sink's capability for maximum
> + * clock per slice (in MHz) as read from HF-VSDB.
> + */
> + max_throughput = min(max_throughput, hdmi_throughput * 1000);
> +
> + min_slices = DIV_ROUND_UP(adjusted_clk_khz, max_throughput);
> + max_slice_width = min(MAX_HDMI_SLICE_WIDTH, src_max_slice_width);
> +
> + /*
> + * Keep on increasing the num of slices/line, starting from min_slices
> + * per line till we get such a number, for which the slice_width is
> + * just less than max_slice_width. The slices/line selected should be
> + * less than or equal to the max horizontal slices that the combination
> + * of PCON encoder and HDMI decoder can support.
> + */
> + slice_width = max_slice_width;
> +
> + do {
> + if (min_slices <= 1 && src_max_slices >= 1 && hdmi_max_slices
> >= 1)
> + target_slices = 1;
> + else if (min_slices <= 2 && src_max_slices >= 2 &&
> hdmi_max_slices >= 2)
> + target_slices = 2;
> + else if (min_slices <= 4 && src_max_slices >= 4 &&
> hdmi_max_slices >= 4)
> + target_slices = 4;
> + else if (min_slices <= 8 && src_max_slices >= 8 &&
> hdmi_max_slices >= 8)
> + target_slices = 8;
> + else if (min_slices <= 12 && src_max_slices >= 12 &&
> hdmi_max_slices >= 12)
> + target_slices = 12;
> + else if (min_slices <= 16 && src_max_slices >= 16 &&
> hdmi_max_slices >= 16)
> + target_slices = 16;
> + else
> + return 0;
> +
> + slice_width = DIV_ROUND_UP(crtc_state-
> >hw.adjusted_mode.hdisplay, target_slices);
> + if (slice_width >= max_slice_width)
> + min_slices = target_slices + 1;
> + } while (slice_width >= max_slice_width);
> +
> + return target_slices;
> +}
> +
> +/*
> + * intel_hdmi_dsc_get_bpp - get the appropriate compressed
> +bits_per_pixel based on
> + * source and sink capabilities.
> + *
> + * @src_fraction_bpp: fractional bpp supported by the source
> + * @slice_width: dsc slice width supported by the source and sink
> + * @num_slices: num of slices supported by the source and sink
> + * @output_format: video output format
> + * @hdmi_all_bpp: sink supports decoding of 1/16th bpp setting
> + * @hdmi_max_chunk_bytes: max bytes in a line of chunks supported by
> +sink
> + *
> + * @return: compressed bits_per_pixel in step of 1/16 of bits_per_pixel
> +*/ int intel_hdmi_dsc_get_bpp(int src_fractional_bpp, int slice_width,
> +int num_slices,
> + int output_format, bool hdmi_all_bpp,
> + int hdmi_max_chunk_bytes)
> +{
> + int max_dsc_bpp, min_dsc_bpp;
> + int target_bytes;
> + bool bpp_found = false;
> + int bpp_decrement_x16;
> + int bpp_target;
> + int bpp_target_x16;
> +
> + /*
> + * Get min bpp and max bpp as per Table 7.23, in HDMI2.1 spec
> + * Start with the max bpp and keep on decrementing with
> + * fractional bpp, if supported by PCON DSC encoder
> + *
> + * for each bpp we check if no of bytes can be supported by HDMI sink
> + */
> +
> + /* Assuming: bpc as 8*/
> + if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
> + min_dsc_bpp = 6;
> + max_dsc_bpp = 3 * 4; /* 3*bpc/2 */
> + } else if (output_format == INTEL_OUTPUT_FORMAT_YCBCR444 ||
> + output_format == INTEL_OUTPUT_FORMAT_RGB) {
> + min_dsc_bpp = 8;
> + max_dsc_bpp = 3 * 8; /* 3*bpc */
> + } else {
> + /* Assuming 4:2:2 encoding */
> + min_dsc_bpp = 7;
> + max_dsc_bpp = 2 * 8; /* 2*bpc */
> + }
> +
> + /*
> + * Taking into account if all dsc_all_bpp supported by HDMI2.1 sink
> + * Section 7.7.34 : Source shall not enable compressed Video
> + * Transport with bpp_target settings above 12 bpp unless
> + * DSC_all_bpp is set to 1.
> + */
> + if (!hdmi_all_bpp)
> + max_dsc_bpp = min(max_dsc_bpp, 12);
> +
> + /*
> + * The Sink has a limit of compressed data in bytes for a scanline,
> + * as described in max_chunk_bytes field in HFVSDB block of edid.
> + * The no. of bytes depend on the target bits per pixel that the
> + * source configures. So we start with the max_bpp and calculate
> + * the target_chunk_bytes. We keep on decrementing the target_bpp,
> + * till we get the target_chunk_bytes just less than what the sink's
> + * max_chunk_bytes, or else till we reach the min_dsc_bpp.
> + *
> + * The decrement is according to the fractional support from PCON DSC
> + * encoder. For fractional BPP we use bpp_target as a multiple of 16.
> + *
> + * bpp_target_x16 = bpp_target * 16
> + * So we need to decrement by {1, 2, 4, 8, 16} for fractional bpps
> + * {1/16, 1/8, 1/4, 1/2, 1} respectively.
> + */
> +
> + bpp_target = max_dsc_bpp;
> +
> + /* src does not support fractional bpp implies decrement by 16 for
> bppx16 */
> + if (!src_fractional_bpp)
> + src_fractional_bpp = 1;
> + bpp_decrement_x16 = DIV_ROUND_UP(16, src_fractional_bpp);
> + bpp_target_x16 = (bpp_target * 16) - bpp_decrement_x16;
> +
> + while (bpp_target_x16 > (min_dsc_bpp * 16)) {
> + int bpp;
> +
> + bpp = DIV_ROUND_UP(bpp_target_x16, 16);
> + target_bytes = DIV_ROUND_UP((num_slices * slice_width * bpp),
> 8);
> + if (target_bytes <= hdmi_max_chunk_bytes) {
> + bpp_found = true;
> + break;
> + }
> + bpp_target_x16 -= bpp_decrement_x16;
> + }
> + if (bpp_found)
> + return bpp_target_x16;
> +
> + return 0;
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.h
> b/drivers/gpu/drm/i915/display/intel_hdmi.h
> index 15eb0ccde76e..fa1a9b030850 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.h
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.h
> @@ -50,5 +50,12 @@ bool intel_hdmi_limited_color_range(const struct
> intel_crtc_state *crtc_state,
> const struct drm_connector_state
> *conn_state); bool intel_hdmi_deep_color_possible(const struct
> intel_crtc_state
> *crtc_state, int bpc,
> bool has_hdmi_sink, bool ycbcr420_output);
> +int intel_hdmi_dsc_get_bpp(int src_fractional_bpp, int slice_width,
> + int num_slices, int output_format, bool hdmi_all_bpp,
> + int hdmi_max_chunk_bytes);
> +int intel_hdmi_dsc_get_num_slices(const struct intel_crtc_state *crtc_state,
> + int src_max_slices, int src_max_slice_width,
> + int hdmi_max_slices, int hdmi_throughput); int
> +intel_hdmi_dsc_get_slice_height(int vactive);
>
> #endif /* __INTEL_HDMI_H__ */
> --
> 2.17.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
