On Thu, 2021-10-07 at 12:31 +0300, Gwan-gyeong Mun wrote:
>
> On 10/6/21 11:04 PM, Souza, Jose wrote:
> > On Wed, 2021-10-06 at 11:50 +0300, Gwan-gyeong Mun wrote:
> > >
> > > On 10/6/21 2:18 AM, José Roberto de Souza wrote:
> > > > Alderlake-P was getting 'max time under evasion' messages when PSR2
> > > > is enabled, this is due PIPE_SCANLINE/PIPEDSL returning 0 over a
> > > > period of time longer than VBLANK_EVASION_TIME_US.
> > > >
> > > > For PSR1 we had the same issue so intel_psr_wait_for_idle() was
> > > > implemented to wait for PSR1 to get into idle state but nothing was
> > > > done for PSR2.
> > > >
> > > > For PSR2 we can't only wait for idle state as PSR2 tends to keep
> > > > into sleep state(ready to send selective updates).
> > > > Waiting for any state below deep sleep proved to be effective in
> > > > avoiding the evasion messages and also not wasted a lot of time.
> > > >
> > > > v2:
> > > > - dropping the additional wait_for loops, only the _wait_for_atomic()
> > > > is necessary
> > > > - waiting for states below EDP_PSR2_STATUS_STATE_DEEP_SLEEP
> > > >
> > > > v3:
> > > > - dropping intel_wait_for_condition_atomic() function
> > > >
> > > > Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > > > Cc: Gwan-gyeong Mun <gwan-gyeong....@intel.com>
> > > > Signed-off-by: José Roberto de Souza <jose.so...@intel.com>
> > > > ---
> > > > .../drm/i915/display/intel_display_debugfs.c | 3 +-
> > > > drivers/gpu/drm/i915/display/intel_psr.c | 52
> > > > +++++++++++--------
> > > > drivers/gpu/drm/i915/i915_reg.h | 10 ++--
> > > > 3 files changed, 36 insertions(+), 29 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > > b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > > index 309d74fd86ce1..d7dd3a57c6170 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > > @@ -303,8 +303,7 @@ psr_source_status(struct intel_dp *intel_dp, struct
> > > > seq_file *m)
> > > > };
> > > > val = intel_de_read(dev_priv,
> > > > EDP_PSR2_STATUS(intel_dp->psr.transcoder));
> > > > -status_val = (val & EDP_PSR2_STATUS_STATE_MASK) >>
> > > > - EDP_PSR2_STATUS_STATE_SHIFT;
> > > > +status_val = REG_FIELD_GET(EDP_PSR2_STATUS_STATE_MASK, val);
> > > > if (status_val < ARRAY_SIZE(live_status))
> > > > status = live_status[status_val];
> > > > } else {
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> > > > b/drivers/gpu/drm/i915/display/intel_psr.c
> > > > index 7a205fd5023bb..ade514fc0a24d 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_psr.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> > > > @@ -1809,15 +1809,21 @@ void intel_psr_post_plane_update(const struct
> > > > intel_atomic_state *state)
> > > > _intel_psr_post_plane_update(state, crtc_state);
> > > > }
> > > >
> > > > -/**
> > > > - * psr_wait_for_idle - wait for PSR1 to idle
> > > > - * @intel_dp: Intel DP
> > > > - * @out_value: PSR status in case of failure
> > > > - *
> > > > - * Returns: 0 on success or -ETIMEOUT if PSR status does not idle.
> > > > - *
> > > > - */
> > > > -static int psr_wait_for_idle(struct intel_dp *intel_dp, u32 *out_value)
> > > > +static int _psr2_ready_for_pipe_update_locked(struct intel_dp
> > > > *intel_dp)
> > > > +{
> > > > +struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > > +
> > > > +/*
> > > > + * Any state lower than EDP_PSR2_STATUS_STATE_DEEP_SLEEP is enough.
> > > > + * As all higher states has bit 4 of PSR2 state set we can just wait
> > > > for
> > > > + * EDP_PSR2_STATUS_STATE_DEEP_SLEEP to be cleared.
> > > > + */
> > > > +return intel_de_wait_for_clear(dev_priv,
> > > > + EDP_PSR2_STATUS(intel_dp->psr.transcoder),
> > > > + EDP_PSR2_STATUS_STATE_DEEP_SLEEP, 50);
> > > Under the DEEP_SLEEP state, there are IDLE, CAPTURE, CPTURE_FS, SLEEP,
> > > BUFON_FW, ML_UP, SU_STANDBY, etc. In this case, whether the evasion
> > > messages are completely tested in the state that changes quickly I think
> > > the test period is a little insufficient.
> >
> > What is your suggestion of test for this?
> >
> > I left my Alderlake-P running overnight(more than 12 hours) with a News
> > website open.
> > This website reloads the page at every 5 minutes, so it entered and exited
> > DC5/6 states several times without any evasion messages.
> >
> > > I think it may be necessary to test a little more or to have
> > > confirmation from the HW person in charge.
> >
> > I can file an issue for this but it will probably several weeks to get an
> > answer.
> >
> Yes, I am not disparaging what you tested.
> However, since the current code confirms that only the 31st bit of the
> PSR2_STATUS register is changed to 0 operationally,
> it does not guarantee that the tested use cases have been tested for
> IDLE, CAPTURE, CPTURE_FS, SLEEP, BUFON_FW, ML_UP, SU_STANDBY, and
> FAST_SLEEP states.
>
> I can't think of a way to test each of the above states right now, but
> what I can suggest is that "intel_de_wait_for_clear(dev_priv,
> EDP_PSR2_STATUS(intel_dp->psr.transcoder),
> EDP_PSR2_STATUS_STATE_DEEP_SLEEP, 50)" works normally. After that, can
> you put a code that prints the current PSR2 status?
>
> If so, I think it will be easy to analyze the problem in case evasion
> messages occur again after this code is applied later.
> If additional confirmation from the responsible HW developer is received
> at a later time, it is thought that future work such as deleting the
> code that outputs the newly added current PSR Status at that time will
> be possible.
Print the PSR status at every flip is too verbose.
Other option would be print the PSR status in case a evasion happened but that
would not give us much information as the status would have changed
between intel_pipe_update_start() and intel_pipe_update_end().
The current solution is better than no wait and if evasion messages comes back
we can be more restrictive and make it wait for idle or sleep PSR2
states.
>
> Br,
> G.G.
> > >
> > > [PSR2_STATUS]
> > > +-------+------------+-------------------------------------------------+
> > > > Value | Name | Description |
> > > +-------+------------+-------------------------------------------------+
> > > > 0000b| IDLE | Reset state |
> > > +-------+------------+-------------------------------------------------+
> > > > 0001b| CAPTURE | Send capture frame |
> > > +-------+------------+-------------------------------------------------+
> > > > 0010b| CPTURE_FS | Fast sleep after capture frame is sent |
> > > +-------+------------+-------------------------------------------------+
> > > > 0011b| SLEEP | Selective Update |
> > > +-------+------------+-------------------------------------------------+
> > > > 0100b| BUFON_FW | Turn Buffer on and Send Fast wake |
> > > +-------+------------+-------------------------------------------------+
> > > > 0101b| ML_UP | Turn Main link up and send SR |
> > > +-------+------------+-------------------------------------------------+
> > > > 0110b| SU_STANDBY | Selective update or Standby state |
> > > +-------+------------+-------------------------------------------------+
> > > > 0111b| FAST_SLEEP | Send Fast sleep |
> > >
> > > +-------+------------+-------------------------------------------------+
> > > > 1000b| DEEP_SLEEP | Enter Deep sleep |
> > > +-------+------------+-------------------------------------------------+
> > > > 1001b| BUF_ON | Turn ON IO Buffer |
> > > +-------+------------+-------------------------------------------------+
> > > > 1010b| TG_ON | Turn ON Timing Generator |
> > > +-------+------------+-------------------------------------------------+
> > > > 1011b| BUFON_FW_2 |Turn Buffer on and Send Fast wake for 3 BlockCase|
> > > +-------+------------+-------------------------------------------------+
> > > > +}
> > > > +
> > > > +static int _psr1_ready_for_pipe_update_locked(struct intel_dp
> > > > *intel_dp)
> > > > {
> > > > struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > >
> > > > @@ -1827,15 +1833,13 @@ static int psr_wait_for_idle(struct intel_dp
> > > > *intel_dp, u32 *out_value)
> > > > * exit training time + 1.5 ms of aux channel handshake. 50 ms is
> > > > * defensive enough to cover everything.
> > > > */
> > > > -return __intel_wait_for_register(&dev_priv->uncore,
> > > > - EDP_PSR_STATUS(intel_dp->psr.transcoder),
> > > > - EDP_PSR_STATUS_STATE_MASK,
> > > > - EDP_PSR_STATUS_STATE_IDLE, 2, 50,
> > > > - out_value);
> > > > +return intel_de_wait_for_clear(dev_priv,
> > > > + EDP_PSR_STATUS(intel_dp->psr.transcoder),
> > > > + EDP_PSR_STATUS_STATE_MASK, 50);
> > > > }
> > > >
> > > > /**
> > > > - * intel_psr_wait_for_idle - wait for PSR1 to idle
> > > > + * intel_psr_wait_for_idle - wait for PSR be ready for a pipe update
> > > > * @new_crtc_state: new CRTC state
> > > > *
> > > > * This function is expected to be called from pipe_update_start()
> > > > where it is
> > > > @@ -1852,19 +1856,23 @@ void intel_psr_wait_for_idle(const struct
> > > > intel_crtc_state *new_crtc_state)
> > > > for_each_intel_encoder_mask_with_psr(&dev_priv->drm, encoder,
> > > > new_crtc_state->uapi.encoder_mask) {
> > > > struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> > > > -u32 psr_status;
> > > > +int ret;
> > > >
> > > > mutex_lock(&intel_dp->psr.lock);
> > > > -if (!intel_dp->psr.enabled || intel_dp->psr.psr2_enabled) {
> > > > +
> > > > +if (!intel_dp->psr.enabled) {
> > > > mutex_unlock(&intel_dp->psr.lock);
> > > > continue;
> > > > }
> > > >
> > > > -/* when the PSR1 is enabled */
> > > > -if (psr_wait_for_idle(intel_dp, &psr_status))
> > > > -drm_err(&dev_priv->drm,
> > > > -"PSR idle timed out 0x%x, atomic update may fail\n",
> > > > -psr_status);
> > > > +if (intel_dp->psr.psr2_enabled)
> > > > +ret = _psr2_ready_for_pipe_update_locked(intel_dp);
> > > > +else
> > > > +ret = _psr1_ready_for_pipe_update_locked(intel_dp);
> > > > +
> > > > +if (ret)
> > > > +drm_err(&dev_priv->drm, "PSR wait timed out, atomic update may
> > > > fail\n");
> > > > +
> > > > mutex_unlock(&intel_dp->psr.lock);
> > > > }
> > > > }
> > > > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > > > b/drivers/gpu/drm/i915/i915_reg.h
> > > > index a897f4abea0c3..e101579d3a4d8 100644
> > > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > > @@ -4700,11 +4700,11 @@ enum {
> > > > #define PSR_EVENT_LPSP_MODE_EXIT(1 << 1)
> > > > #define PSR_EVENT_PSR_DISABLE(1 << 0)
> > > >
> > > > -#define _PSR2_STATUS_A0x60940
> > > > -#define _PSR2_STATUS_EDP0x6f940
> > > > -#define EDP_PSR2_STATUS(tran)_MMIO_TRANS2(tran, _PSR2_STATUS_A)
> > > > -#define EDP_PSR2_STATUS_STATE_MASK (0xf << 28)
> > > > -#define EDP_PSR2_STATUS_STATE_SHIFT 28
> > > > +#define _PSR2_STATUS_A0x60940
> > > > +#define _PSR2_STATUS_EDP0x6f940
> > > > +#define EDP_PSR2_STATUS(tran)_MMIO_TRANS2(tran, _PSR2_STATUS_A)
> > > > +#define EDP_PSR2_STATUS_STATE_MASKREG_GENMASK(31, 28)
> > > > +#define
> > > > EDP_PSR2_STATUS_STATE_DEEP_SLEEPREG_FIELD_PREP(EDP_PSR2_STATUS_STATE_MASK,
> > > > 0x8)
> > > >
> > > > #define _PSR2_SU_STATUS_A0x60914
> > > > #define _PSR2_SU_STATUS_EDP0x6f914
> > > >
> >
