On Thu, 2022-02-17 at 17:22 +0200, Imre Deak wrote: > BIOS may leave a TypeC PHY in a connected state even though the > corresponding port is disabled. This will prevent any hotplug events > from being signalled (after the monitor deasserts and then reasserts its > HPD) until the PHY is disconnected and so the driver will not detect a > connected sink. Rebooting with the PHY in the connected state also > results in a system hang. > > Fix the above by disconnecting TypeC PHYs on disabled ports. > > Before commit 64851a32c463e5 the PHY connected state was read out even > for disabled ports and later the PHY got disconnected as a side effect > of a tc_port_lock/unlock() sequence (during connector probing), hence > recovering the port's hotplug functionality.
Reviewed-by: José Roberto de Souza <jose.so...@intel.com> > > Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014 > Fixes: 64851a32c463 ("drm/i915/tc: Add a mode for the TypeC PHY's > disconnected state") > Cc: <sta...@vger.kernel.org> # v5.16+ > Cc: José Roberto de Souza <jose.so...@intel.com> > Signed-off-by: Imre Deak <imre.d...@intel.com> > --- > drivers/gpu/drm/i915/display/intel_tc.c | 28 ++++++++++++++++++------- > 1 file changed, 21 insertions(+), 7 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_tc.c > b/drivers/gpu/drm/i915/display/intel_tc.c > index feead08ddf8ff..fc037c027ea5a 100644 > --- a/drivers/gpu/drm/i915/display/intel_tc.c > +++ b/drivers/gpu/drm/i915/display/intel_tc.c > @@ -693,6 +693,8 @@ void intel_tc_port_sanitize(struct intel_digital_port > *dig_port) > { > struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); > struct intel_encoder *encoder = &dig_port->base; > + intel_wakeref_t tc_cold_wref; > + enum intel_display_power_domain domain; > int active_links = 0; > > mutex_lock(&dig_port->tc_lock); > @@ -704,12 +706,11 @@ void intel_tc_port_sanitize(struct intel_digital_port > *dig_port) > > drm_WARN_ON(&i915->drm, dig_port->tc_mode != TC_PORT_DISCONNECTED); > drm_WARN_ON(&i915->drm, dig_port->tc_lock_wakeref); > + > + tc_cold_wref = tc_cold_block(dig_port, &domain); > + > + dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port); > if (active_links) { > - enum intel_display_power_domain domain; > - intel_wakeref_t tc_cold_wref = tc_cold_block(dig_port, &domain); > - > - dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port); > - > if (!icl_tc_phy_is_connected(dig_port)) > drm_dbg_kms(&i915->drm, > "Port %s: PHY disconnected with %d active > link(s)\n", > @@ -718,10 +719,23 @@ void intel_tc_port_sanitize(struct intel_digital_port > *dig_port) > > dig_port->tc_lock_wakeref = tc_cold_block(dig_port, > > &dig_port->tc_lock_power_domain); > - > - tc_cold_unblock(dig_port, domain, tc_cold_wref); > + } else { > + /* > + * TBT-alt is the default mode in any case the PHY ownership is > not > + * held (regardless of the sink's connected live state), so > + * we'll just switch to disconnected mode from it here without > + * a note. > + */ > + if (dig_port->tc_mode != TC_PORT_TBT_ALT) > + drm_dbg_kms(&i915->drm, > + "Port %s: PHY left in %s mode on disabled > port, disconnecting it\n", > + dig_port->tc_port_name, > + tc_port_mode_name(dig_port->tc_mode)); > + icl_tc_phy_disconnect(dig_port); > } > > + tc_cold_unblock(dig_port, domain, tc_cold_wref); > + > drm_dbg_kms(&i915->drm, "Port %s: sanitize mode (%s)\n", > dig_port->tc_port_name, > tc_port_mode_name(dig_port->tc_mode));
