On Wed, 11 Jan 2023, Suraj Kandpal <[email protected]> wrote: > Add function to check if slice design requirements are being > met as defined in the below link section Slice Design Requirement > > https://gfxspecs.intel.com/Predator/Home/Index/49259 >
Just add this: Bspec: 49259 and no URLs. > Signed-off-by: Suraj Kandpal <[email protected]> > --- > drivers/gpu/drm/i915/display/intel_vdsc.c | 32 +++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > > diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c > b/drivers/gpu/drm/i915/display/intel_vdsc.c > index 52a82d8b289e..0a683d6dff33 100644 > --- a/drivers/gpu/drm/i915/display/intel_vdsc.c > +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c > @@ -447,6 +447,29 @@ calculate_rc_params(struct rc_parameters *rc, > } > } > > +static int intel_dsc_check_slice_design_req(struct intel_crtc_state > *pipe_config, > + struct drm_dsc_config *vdsc_cfg) Bikeshedding, I think "check" is generally a poor verb in a function name. intel_dsc_slice_dimensions_valid() or something like that? > +{ > + if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_RGB || > + pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) { > + if (vdsc_cfg->slice_height > 4095) > + return -EINVAL; > + if (vdsc_cfg->slice_height * vdsc_cfg->slice_width < 15000) > + return -EINVAL; > + } else if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) { > + if (!(vdsc_cfg->slice_width % 2)) > + return -EINVAL; > + if (!(vdsc_cfg->slice_height % 2)) > + return -EINVAL; > + if (vdsc_cfg->slice_height > 4094) > + return -EINVAL; > + if (vdsc_cfg->slice_height * vdsc_cfg->slice_width < 30000) > + return -EINVAL; > + } > + > + return 0; > +} > + > int intel_dsc_compute_params(struct intel_crtc_state *pipe_config) > { > struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); > @@ -455,11 +478,20 @@ int intel_dsc_compute_params(struct intel_crtc_state > *pipe_config) > u16 compressed_bpp = pipe_config->dsc.compressed_bpp; > const struct rc_parameters *rc_params; > struct rc_parameters *rc = NULL; > + int err; > u8 i = 0; > > vdsc_cfg->pic_width = pipe_config->hw.adjusted_mode.crtc_hdisplay; > vdsc_cfg->slice_width = DIV_ROUND_UP(vdsc_cfg->pic_width, > pipe_config->dsc.slice_count); > + > + err = intel_dsc_check_slice_design_req(pipe_config, vdsc_cfg); > + > + if (err) { > + drm_dbg_kms(&dev_priv->drm, "Slice design requirements not > met\n"); > + return err; > + } > + > /* > * According to DSC 1.2 specs if colorspace is YCbCr then convert_rgb > is 0 > * else 1 -- Jani Nikula, Intel Open Source Graphics Center
