Semaphore waits use a new instruction, MI_SEMAPHORE_WAIT. The seqno to
wait on is all well defined by the table in the previous patch. There is
nothing else different from previous GEN's semaphore synchronization
code.
v2: Update macros to not require the other ring's ring->id (Chris)
v3: Use a condensed GEN8_SEMAPHORE_OFFSET to define the WAIT/SIGNAL
offsets (Chris). To be honest, I prefer the original implementation
because I feel it is more explicit about exactly what is going on. I am
willing to declare I am just unsmart, and leave it there.
Signed-off-by: Ben Widawsky <b...@bwidawsk.net>
---
drivers/gpu/drm/i915/i915_reg.h | 3 ++
drivers/gpu/drm/i915/intel_ringbuffer.c | 66 +++++++++++++++------------------
drivers/gpu/drm/i915/intel_ringbuffer.h | 30 +++++++++++++++
3 files changed, 62 insertions(+), 37 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5c3bf66..a47463f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -242,6 +242,9 @@
#define MI_RESTORE_INHIBIT (1<<0)
#define MI_SEMAPHORE_SIGNAL MI_INSTR(0x1b, 0) /* GEN8+ */
#define MI_SEMAPHORE_TARGET(engine) ((engine)<<15)
+#define MI_SEMAPHORE_WAIT MI_INSTR(0x1c, 2) /* GEN8+ */
+#define MI_SEMAPHORE_POLL (1<<15)
+#define MI_SEMAPHORE_SAD_GTE_SDD (1<<12)
#define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1)
#define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */
#define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c
b/drivers/gpu/drm/i915/intel_ringbuffer.c
index d6e664d..f87b704 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -796,6 +796,31 @@ static inline bool i915_gem_has_seqno_wrapped(struct
drm_device *dev,
* @signaller - ring which has, or will signal
* @seqno - seqno which the waiter will block on
*/
+
+static int
+gen8_ring_sync(struct intel_ring_buffer *waiter,
+ struct intel_ring_buffer *signaller,
+ u32 seqno)
+{
+ struct drm_i915_private *dev_priv = waiter->dev->dev_private;
+ int ret;
+
+ ret = intel_ring_begin(waiter, 4);
+ if (ret)
+ return ret;
+
+ intel_ring_emit(waiter, MI_SEMAPHORE_WAIT |
+ MI_SEMAPHORE_GLOBAL_GTT |
+ MI_SEMAPHORE_SAD_GTE_SDD);
+ intel_ring_emit(waiter, seqno);
+ intel_ring_emit(waiter,
+ lower_32_bits(GEN8_WAIT_OFFSET(waiter, signaller->id)));
+ intel_ring_emit(waiter,
+ upper_32_bits(GEN8_WAIT_OFFSET(waiter, signaller->id)));
+ intel_ring_advance(waiter);
+ return 0;
+}
+
static int
gen6_ring_sync(struct intel_ring_buffer *waiter,
struct intel_ring_buffer *signaller,
@@ -1934,39 +1959,6 @@ static int gen6_ring_flush(struct intel_ring_buffer
*ring,
return 0;
}
-/* seqno size is actually only a uint32, but since we plan to use MI_FLUSH_DW
to
- * do the writes, and that must have qw aligned offsets, simply pretend it's
8b.
- */
-#define SEQNO_SIZE sizeof(uint64_t)
-#define GEN8_SIGNAL_OFFSET(to) \
- (i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \
- (ring->id * I915_NUM_RINGS * SEQNO_SIZE) + \
- (SEQNO_SIZE * (to)))
-
-#define GEN8_WAIT_OFFSET(from) \
- (i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \
- ((from) * I915_NUM_RINGS * SEQNO_SIZE) + \
- (SEQNO_SIZE * ring->id))
-
-#define GEN8_RING_SEMAPHORE_INIT do { \
- if (!dev_priv->semaphore_obj) { \
- break; \
- } \
- ring->semaphore.signal_ggtt[RCS] = GEN8_SIGNAL_OFFSET(RCS); \
- ring->semaphore.signal_ggtt[VCS] = GEN8_SIGNAL_OFFSET(VCS); \
- ring->semaphore.signal_ggtt[BCS] = GEN8_SIGNAL_OFFSET(BCS); \
- ring->semaphore.signal_ggtt[VECS] = GEN8_SIGNAL_OFFSET(VECS); \
- ring->semaphore.mbox[RCS] = GEN8_WAIT_OFFSET(RCS); \
- ring->semaphore.mbox[VCS] = GEN8_WAIT_OFFSET(VCS); \
- ring->semaphore.mbox[BCS] = GEN8_WAIT_OFFSET(BCS); \
- ring->semaphore.mbox[VECS] = GEN8_WAIT_OFFSET(VECS); \
- ring->semaphore.signal_ggtt[ring->id] = MI_SEMAPHORE_SYNC_INVALID; \
- ring->semaphore.mbox[ring->id] = GEN6_NOSYNC; \
- } while(0)
-#undef seqno_size
-
-
-
int intel_init_render_ring_buffer(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
@@ -2002,7 +1994,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
ring->get_seqno = gen6_ring_get_seqno;
ring->set_seqno = ring_set_seqno;
- ring->semaphore.sync_to = gen6_ring_sync;
+ ring->semaphore.sync_to = gen8_ring_sync;
if (i915_semaphore_is_enabled(dev)) {
BUG_ON(!dev_priv->semaphore_obj);
ring->semaphore.signal = gen8_rcs_signal;
@@ -2187,7 +2179,7 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
ring->irq_put = gen8_ring_put_irq;
ring->dispatch_execbuffer =
gen8_ring_dispatch_execbuffer;
- ring->semaphore.sync_to = gen6_ring_sync;
+ ring->semaphore.sync_to = gen8_ring_sync;
if (i915_semaphore_is_enabled(dev)) {
ring->semaphore.signal = gen8_xcs_signal;
GEN8_RING_SEMAPHORE_INIT;
@@ -2252,7 +2244,7 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
ring->irq_get = gen8_ring_get_irq;
ring->irq_put = gen8_ring_put_irq;
ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer;
- ring->semaphore.sync_to = gen6_ring_sync;
+ ring->semaphore.sync_to = gen8_ring_sync;
if (i915_semaphore_is_enabled(dev)) {
ring->semaphore.signal = gen8_xcs_signal;
GEN8_RING_SEMAPHORE_INIT;
@@ -2301,7 +2293,7 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev)
ring->irq_get = gen8_ring_get_irq;
ring->irq_put = gen8_ring_put_irq;
ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer;
- ring->semaphore.sync_to = gen6_ring_sync;
+ ring->semaphore.sync_to = gen8_ring_sync;
if (i915_semaphore_is_enabled(dev)) {
ring->semaphore.signal = gen8_xcs_signal;
GEN8_RING_SEMAPHORE_INIT;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h
b/drivers/gpu/drm/i915/intel_ringbuffer.h
index cbaa346..26beade 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -33,6 +33,36 @@ struct intel_hw_status_page {
#define I915_READ_IMR(ring) I915_READ(RING_IMR((ring)->mmio_base))
#define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val)
+/* seqno size is actually only a uint32, but since we plan to use MI_FLUSH_DW
to
+ * do the writes, and that must have qw aligned offsets, simply pretend it's
8b.
+ */
+#define i915_semaphore_seqno_size sizeof(uint64_t)
+#define GEN8_SEMAPHORE_OFFSET(from, to) \
+ (i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \
+ ((from) * I915_NUM_RINGS + (to)) * i915_semaphore_seqno_size)
+
+#define GEN8_SIGNAL_OFFSET(to) \
+ GEN8_SEMAPHORE_OFFSET(ring->id, to)
+
+#define GEN8_WAIT_OFFSET(__ring, from) \
+ GEN8_SEMAPHORE_OFFSET(from, (__ring)->id)
+
+#define GEN8_RING_SEMAPHORE_INIT do { \
+ if (!dev_priv->semaphore_obj) { \
+ break; \
+ } \
+ ring->semaphore.signal_ggtt[RCS] = GEN8_SIGNAL_OFFSET(RCS); \
+ ring->semaphore.signal_ggtt[VCS] = GEN8_SIGNAL_OFFSET(VCS); \
+ ring->semaphore.signal_ggtt[BCS] = GEN8_SIGNAL_OFFSET(BCS); \
+ ring->semaphore.signal_ggtt[VECS] = GEN8_SIGNAL_OFFSET(VECS); \
+ ring->semaphore.mbox[RCS] = GEN8_WAIT_OFFSET(ring, RCS); \
+ ring->semaphore.mbox[VCS] = GEN8_WAIT_OFFSET(ring, VCS); \
+ ring->semaphore.mbox[BCS] = GEN8_WAIT_OFFSET(ring, BCS); \
+ ring->semaphore.mbox[VECS] = GEN8_WAIT_OFFSET(ring, VECS); \
+ ring->semaphore.signal_ggtt[ring->id] = MI_SEMAPHORE_SYNC_INVALID; \
+ ring->semaphore.mbox[ring->id] = GEN6_NOSYNC; \
+ } while(0)
+
enum intel_ring_hangcheck_action {
HANGCHECK_IDLE = 0,
HANGCHECK_WAIT,
--
1.8.5.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
