Hi, Vinod.
I have some comments for this version, please see them below. With those
fixed,
Acked-by: Gustavo Sousa <gustavo.so...@intel.com>
Quoting Vinod Govindapillai (2023-06-01 09:19:23-03:00)
>From: Mika Kahola <mika.kah...@intel.com>
>
>MTL introduces a new way to instruct the PUnit with
>power and bandwidth requirements of DE. Add the functionality
>to program the registers and handle waits using interrupts.
>The current wait time for timeouts is programmed for 10 msecs to
>factor in the worst case scenarios. Changes made to use REG_BIT
>for a register that we touched(GEN8_DE_MISC_IER _MMIO).
>
>Wa_14016740474 is added which applies to Xe_LPD+ display
>
>v2: checkpatch warning fixes, simplify program pmdemand part
>
>v3: update to dbufs and pipes values to pmdemand register(stan)
> Removed the macro usage in update_pmdemand_values()
>
>v4: move the pmdemand_pre_plane_update before cdclk update
> pmdemand_needs_update included cdclk params comparisons
> pmdemand_state NULL check (Gustavo)
> pmdemand.o in sorted order in the makefile (Jani)
> update pmdemand misc irq handler loop (Gustavo)
> active phys bitmask and programming correction (Gustavo)
>
>v5: simplify pmdemand_state structure
> simplify methods to find active phys and max port clock
> Timeout in case of previou pmdemand task pending (Gustavo)
>
>v6: rebasing
> updates to max_ddiclk calculations (Gustavo)
> updates to active_phys count method (Gustavo)
>
>v7: use two separate loop to iterate throug old and new
> crtc states to calculate the active phys (Gustavo)
>
>v8: use uniform function names (Gustavo)
>
>v9: For phys change iterate through connectors (Imre)
> Look for change in phys for pmdemand update (Gustavo, Imre)
> Some more stlying changes (Imre)
> Update pmdemand state during HW readout/sanitize (Imre)
>
>v10: Fix CI checkpatch warnings
>
>Bspec: 66451, 64636, 64602, 64603
>Cc: Matt Atwood <matthew.s.atw...@intel.com>
>Cc: Matt Roper <matthew.d.ro...@intel.com>
>Cc: Lucas De Marchi <lucas.demar...@intel.com>
>Cc: Gustavo Sousa <gustavo.so...@intel.com>
>Signed-off-by: José Roberto de Souza <jose.so...@intel.com>
>Signed-off-by: Radhakrishna Sripada <radhakrishna.srip...@intel.com>
>Signed-off-by: Gustavo Sousa <gustavo.so...@intel.com>
>Signed-off-by: Mika Kahola <mika.kah...@intel.com>
>Signed-off-by: Vinod Govindapillai <vinod.govindapil...@intel.com>
>Reviewed-by: Stanislav Lisovskiy <stanislav.lisovs...@intel.com>
>---
> drivers/gpu/drm/i915/Makefile | 1 +
> drivers/gpu/drm/i915/display/intel_display.c | 14 +
> .../gpu/drm/i915/display/intel_display_core.h | 9 +
> .../drm/i915/display/intel_display_driver.c | 7 +
> .../gpu/drm/i915/display/intel_display_irq.c | 23 +-
> .../drm/i915/display/intel_display_power.c | 14 +-
> .../drm/i915/display/intel_modeset_setup.c | 18 +
> drivers/gpu/drm/i915/display/intel_pmdemand.c | 555 ++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_pmdemand.h | 56 ++
> drivers/gpu/drm/i915/i915_reg.h | 36 +-
> 10 files changed, 727 insertions(+), 6 deletions(-)
> create mode 100644 drivers/gpu/drm/i915/display/intel_pmdemand.c
> create mode 100644 drivers/gpu/drm/i915/display/intel_pmdemand.h
>
>diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
>index 1c9ed4c52760..2cd8de174bf6 100644
>--- a/drivers/gpu/drm/i915/Makefile
>+++ b/drivers/gpu/drm/i915/Makefile
>@@ -269,6 +269,7 @@ i915-y += \
> display/intel_pch_display.o \
> display/intel_pch_refclk.o \
> display/intel_plane_initial.o \
>+ display/intel_pmdemand.o \
> display/intel_psr.o \
> display/intel_quirks.o \
> display/intel_sprite.o \
>diff --git a/drivers/gpu/drm/i915/display/intel_display.c
>b/drivers/gpu/drm/i915/display/intel_display.c
>index f51a55f4e9d0..5cbf5eae2414 100644
>--- a/drivers/gpu/drm/i915/display/intel_display.c
>+++ b/drivers/gpu/drm/i915/display/intel_display.c
>@@ -99,6 +99,7 @@
> #include "intel_pcode.h"
> #include "intel_pipe_crc.h"
> #include "intel_plane_initial.h"
>+#include "intel_pmdemand.h"
> #include "intel_pps.h"
> #include "intel_psr.h"
> #include "intel_sdvo.h"
>@@ -6352,6 +6353,10 @@ int intel_atomic_check(struct drm_device *dev,
> return ret;
> }
>
>+ ret = intel_pmdemand_atomic_check(state);
>+ if (ret)
>+ goto fail;
>+
> ret = intel_atomic_check_crtcs(state);
> if (ret)
> goto fail;
>@@ -6997,6 +7002,14 @@ static void intel_atomic_commit_tail(struct
>intel_atomic_state *state)
> for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
> crtc->config = new_crtc_state;
>
>+ /*
>+ * In XE_LPD+ Pmdemand combines many parameters such as voltage index,
>+ * plls, cdclk frequency, QGV point selection parameter etc. Voltage
>+ * index, cdclk/ddiclk frequencies are supposed to be configured
>before
>+ * the cdclk config is set.
>+ */
>+ intel_pmdemand_pre_plane_update(state);
>+
> if (state->modeset) {
> drm_atomic_helper_update_legacy_modeset_state(dev,
> &state->base);
>
>@@ -7116,6 +7129,7 @@ static void intel_atomic_commit_tail(struct
>intel_atomic_state *state)
> intel_verify_planes(state);
>
> intel_sagv_post_plane_update(state);
>+ intel_pmdemand_post_plane_update(state);
>
> drm_atomic_helper_commit_hw_done(&state->base);
>
>diff --git a/drivers/gpu/drm/i915/display/intel_display_core.h
>b/drivers/gpu/drm/i915/display/intel_display_core.h
>index dd8e08c8598f..8d2243c71dd8 100644
>--- a/drivers/gpu/drm/i915/display/intel_display_core.h
>+++ b/drivers/gpu/drm/i915/display/intel_display_core.h
>@@ -345,6 +345,15 @@ struct intel_display {
> struct intel_global_obj obj;
> } dbuf;
>
>+ struct {
>+ wait_queue_head_t waitqueue;
>+
>+ /* mutex to protect pmdemand programming sequence */
>+ struct mutex lock;
>+
>+ struct intel_global_obj obj;
>+ } pmdemand;
>+
> struct {
> /*
> * dkl.phy_lock protects against concurrent access of the
>diff --git a/drivers/gpu/drm/i915/display/intel_display_driver.c
>b/drivers/gpu/drm/i915/display/intel_display_driver.c
>index 60ce10fc7205..dc8de861339d 100644
>--- a/drivers/gpu/drm/i915/display/intel_display_driver.c
>+++ b/drivers/gpu/drm/i915/display/intel_display_driver.c
>@@ -47,6 +47,7 @@
> #include "intel_opregion.h"
> #include "intel_overlay.h"
> #include "intel_plane_initial.h"
>+#include "intel_pmdemand.h"
> #include "intel_pps.h"
> #include "intel_quirks.h"
> #include "intel_vga.h"
>@@ -211,6 +212,8 @@ int intel_display_driver_probe_noirq(struct
>drm_i915_private *i915)
> if (ret < 0)
> goto cleanup_vga;
>
>+ intel_pmdemand_init_early(i915);
>+
> intel_power_domains_init_hw(i915, false);
>
> if (!HAS_DISPLAY(i915))
>@@ -240,6 +243,10 @@ int intel_display_driver_probe_noirq(struct
>drm_i915_private *i915)
> if (ret)
> goto cleanup_vga_client_pw_domain_dmc;
>
>+ ret = intel_pmdemand_init(i915);
>+ if (ret)
>+ goto cleanup_vga_client_pw_domain_dmc;
>+
> init_llist_head(&i915->display.atomic_helper.free_list);
> INIT_WORK(&i915->display.atomic_helper.free_work,
> intel_atomic_helper_free_state_worker);
>diff --git a/drivers/gpu/drm/i915/display/intel_display_irq.c
>b/drivers/gpu/drm/i915/display/intel_display_irq.c
>index 3b2a287d2041..0b3739310f81 100644
>--- a/drivers/gpu/drm/i915/display/intel_display_irq.c
>+++ b/drivers/gpu/drm/i915/display/intel_display_irq.c
>@@ -18,6 +18,7 @@
> #include "intel_fifo_underrun.h"
> #include "intel_gmbus.h"
> #include "intel_hotplug_irq.h"
>+#include "intel_pmdemand.h"
> #include "intel_psr.h"
> #include "intel_psr_regs.h"
>
>@@ -827,12 +828,27 @@ static u32 gen8_de_pipe_fault_mask(struct
>drm_i915_private *dev_priv)
> return GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
> }
>
>+static void intel_pmdemand_irq_handler(struct drm_i915_private *dev_priv)
>+{
>+ wake_up_all(&dev_priv->display.pmdemand.waitqueue);
>+}
>+
> static void
> gen8_de_misc_irq_handler(struct drm_i915_private *dev_priv, u32 iir)
> {
> bool found = false;
>
>- if (iir & GEN8_DE_MISC_GSE) {
>+ if (DISPLAY_VER(dev_priv) >= 14) {
>+ if (iir & (XELPDP_PMDEMAND_RSP |
>+ XELPDP_PMDEMAND_RSPTOUT_ERR)) {
>+ if (iir & XELPDP_PMDEMAND_RSPTOUT_ERR)
>+ drm_dbg(&dev_priv->drm,
>+ "Error waiting for Punit PM Demand
>Response\n");
>+
>+ intel_pmdemand_irq_handler(dev_priv);
>+ found = true;
>+ }
>+ } else if (iir & GEN8_DE_MISC_GSE) {
> intel_opregion_asle_intr(dev_priv);
> found = true;
> }
>@@ -1576,7 +1592,10 @@ void gen8_de_irq_postinstall(struct drm_i915_private
>*dev_priv)
> if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
> de_port_masked |= BXT_DE_PORT_GMBUS;
>
>- if (DISPLAY_VER(dev_priv) >= 11) {
>+ if (DISPLAY_VER(dev_priv) >= 14) {
>+ de_misc_masked |= XELPDP_PMDEMAND_RSPTOUT_ERR |
>+ XELPDP_PMDEMAND_RSP;
>+ } else if (DISPLAY_VER(dev_priv) >= 11) {
> enum port port;
>
> if (intel_bios_is_dsi_present(dev_priv, &port))
>diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c
>b/drivers/gpu/drm/i915/display/intel_display_power.c
>index 9c9a809c71f1..db827cf3c9ca 100644
>--- a/drivers/gpu/drm/i915/display/intel_display_power.c
>+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
>@@ -20,6 +20,7 @@
> #include "intel_mchbar_regs.h"
> #include "intel_pch_refclk.h"
> #include "intel_pcode.h"
>+#include "intel_pmdemand.h"
> #include "intel_pps_regs.h"
> #include "intel_snps_phy.h"
> #include "skl_watermark.h"
>@@ -1082,20 +1083,29 @@ void gen9_dbuf_slices_update(struct drm_i915_private
>*dev_priv,
>
> static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
> {
>+ u8 slices_mask;
>+
> dev_priv->display.dbuf.enabled_slices =
> intel_enabled_dbuf_slices_mask(dev_priv);
>
>+ slices_mask = BIT(DBUF_S1) | dev_priv->display.dbuf.enabled_slices;
>+
>+ if (DISPLAY_VER(dev_priv) >= 14)
>+ intel_pmdemand_program_dbuf(dev_priv, slices_mask);
>+
> /*
> * Just power up at least 1 slice, we will
> * figure out later which slices we have and what we need.
> */
>- gen9_dbuf_slices_update(dev_priv, BIT(DBUF_S1) |
>- dev_priv->display.dbuf.enabled_slices);
>+ gen9_dbuf_slices_update(dev_priv, slices_mask);
> }
>
> static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
> {
> gen9_dbuf_slices_update(dev_priv, 0);
>+
>+ if (DISPLAY_VER(dev_priv) >= 14)
>+ intel_pmdemand_program_dbuf(dev_priv, 0);
> }
>
> static void gen12_dbuf_slices_config(struct drm_i915_private *dev_priv)
>diff --git a/drivers/gpu/drm/i915/display/intel_modeset_setup.c
>b/drivers/gpu/drm/i915/display/intel_modeset_setup.c
>index 5ff99ca7f1de..87f41040916b 100644
>--- a/drivers/gpu/drm/i915/display/intel_modeset_setup.c
>+++ b/drivers/gpu/drm/i915/display/intel_modeset_setup.c
>@@ -26,6 +26,7 @@
> #include "intel_fifo_underrun.h"
> #include "intel_modeset_setup.h"
> #include "intel_pch_display.h"
>+#include "intel_pmdemand.h"
> #include "intel_tc.h"
> #include "intel_vblank.h"
> #include "intel_wm.h"
>@@ -153,6 +154,8 @@ static void intel_crtc_disable_noatomic_complete(struct
>intel_crtc *crtc)
> to_intel_dbuf_state(i915->display.dbuf.obj.state);
> struct intel_crtc_state *crtc_state =
> to_intel_crtc_state(crtc->base.state);
>+ struct intel_pmdemand_state *pmdemand_state =
>+ to_intel_pmdemand_state(i915->display.dbuf.obj.state);
s/dbuf/pmdemand/?
Also, a cosmetic nitpick: maybe do this above the line with "struct
intel_crtc_state *crtc_state ="? Just so we have global state variables grouped
together.
> enum pipe pipe = crtc->pipe;
>
> __drm_atomic_helper_crtc_destroy_state(&crtc_state->uapi);
>@@ -174,6 +177,8 @@ static void intel_crtc_disable_noatomic_complete(struct
>intel_crtc *crtc)
>
> bw_state->data_rate[pipe] = 0;
> bw_state->num_active_planes[pipe] = 0;
>+
>+ pmdemand_state->ddi_clocks[pipe] = 0;
> }
>
> /*
>@@ -661,6 +666,9 @@ static void intel_modeset_readout_hw_state(struct
>drm_i915_private *i915)
> to_intel_cdclk_state(i915->display.cdclk.obj.state);
> struct intel_dbuf_state *dbuf_state =
> to_intel_dbuf_state(i915->display.dbuf.obj.state);
>+ struct intel_pmdemand_state *pmdemand_state =
>+ to_intel_pmdemand_state(i915->display.dbuf.obj.state);
s/dbuf/pmdemand/?
>+ u16 active_phys = 0;
> enum pipe pipe;
> struct intel_crtc *crtc;
> struct intel_encoder *encoder;
>@@ -742,6 +750,8 @@ static void intel_modeset_readout_hw_state(struct
>drm_i915_private *i915)
>
> drm_connector_list_iter_begin(&i915->drm, &conn_iter);
> for_each_intel_connector_iter(connector, &conn_iter) {
>+ enum phy phy;
>+
> if (connector->get_hw_state(connector)) {
> struct intel_crtc_state *crtc_state;
> struct intel_crtc *crtc;
>@@ -764,6 +774,10 @@ static void intel_modeset_readout_hw_state(struct
>drm_i915_private *i915)
> drm_connector_mask(&connector->base);
> crtc_state->uapi.encoder_mask |=
> drm_encoder_mask(&encoder->base);
>+
>+ phy = intel_port_to_phy(i915, encoder->port);
>+ if (!intel_phy_is_tc(i915, phy))
>+ active_phys |= BIT(phy);
> }
> } else {
> connector->base.dpms = DRM_MODE_DPMS_OFF;
>@@ -776,6 +790,8 @@ static void intel_modeset_readout_hw_state(struct
>drm_i915_private *i915)
> }
> drm_connector_list_iter_end(&conn_iter);
>
>+ pmdemand_state->active_phys_mask = active_phys;
>+
> for_each_intel_crtc(&i915->drm, crtc) {
> struct intel_bw_state *bw_state =
> to_intel_bw_state(i915->display.bw.obj.state);
>@@ -840,6 +856,8 @@ static void intel_modeset_readout_hw_state(struct
>drm_i915_private *i915)
> cdclk_state->min_cdclk[crtc->pipe] = min_cdclk;
> cdclk_state->min_voltage_level[crtc->pipe] =
> crtc_state->min_voltage_level;
>+ pmdemand_state->ddi_clocks[crtc->pipe] =
>+ crtc_state->port_clock;
>
> intel_bw_crtc_update(bw_state, crtc_state);
> }
>diff --git a/drivers/gpu/drm/i915/display/intel_pmdemand.c
>b/drivers/gpu/drm/i915/display/intel_pmdemand.c
>new file mode 100644
>index 000000000000..fca99b84c835
>--- /dev/null
>+++ b/drivers/gpu/drm/i915/display/intel_pmdemand.c
>@@ -0,0 +1,555 @@
>+// SPDX-License-Identifier: MIT
>+/*
>+ * Copyright © 2023 Intel Corporation
>+ */
>+
>+#include <linux/bitops.h>
>+
>+#include "i915_drv.h"
>+#include "i915_reg.h"
>+#include "intel_atomic.h"
>+#include "intel_bw.h"
>+#include "intel_cdclk.h"
>+#include "intel_de.h"
>+#include "intel_display_trace.h"
>+#include "intel_pmdemand.h"
>+#include "skl_watermark.h"
>+
>+static struct intel_global_state *
>+intel_pmdemand_duplicate_state(struct intel_global_obj *obj)
>+{
>+ struct intel_pmdemand_state *pmdemand_state;
>+
>+ pmdemand_state = kmemdup(obj->state, sizeof(*pmdemand_state),
>GFP_KERNEL);
>+ if (!pmdemand_state)
>+ return NULL;
>+
>+ return &pmdemand_state->base;
>+}
>+
>+static void intel_pmdemand_destroy_state(struct intel_global_obj *obj,
>+ struct intel_global_state *state)
>+{
>+ kfree(state);
>+}
>+
>+static const struct intel_global_state_funcs intel_pmdemand_funcs = {
>+ .atomic_duplicate_state = intel_pmdemand_duplicate_state,
>+ .atomic_destroy_state = intel_pmdemand_destroy_state,
>+};
>+
>+static struct intel_pmdemand_state *
>+intel_atomic_get_pmdemand_state(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ struct intel_global_state *pmdemand_state =
>+ intel_atomic_get_global_obj_state(state,
>+
>&i915->display.pmdemand.obj);
>+
>+ if (IS_ERR(pmdemand_state))
>+ return ERR_CAST(pmdemand_state);
>+
>+ return to_intel_pmdemand_state(pmdemand_state);
>+}
>+
>+static struct intel_pmdemand_state *
>+intel_atomic_get_old_pmdemand_state(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ struct intel_global_state *pmdemand_state =
>+ intel_atomic_get_old_global_obj_state(state,
>+
>&i915->display.pmdemand.obj);
>+
>+ if (!pmdemand_state)
>+ return NULL;
>+
>+ return to_intel_pmdemand_state(pmdemand_state);
>+}
>+
>+static struct intel_pmdemand_state *
>+intel_atomic_get_new_pmdemand_state(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ struct intel_global_state *pmdemand_state =
>+ intel_atomic_get_new_global_obj_state(state,
>+
>&i915->display.pmdemand.obj);
>+
>+ if (!pmdemand_state)
>+ return NULL;
>+
>+ return to_intel_pmdemand_state(pmdemand_state);
>+}
>+
>+int intel_pmdemand_init(struct drm_i915_private *i915)
>+{
>+ struct intel_pmdemand_state *pmdemand_state;
>+
>+ pmdemand_state = kzalloc(sizeof(*pmdemand_state), GFP_KERNEL);
>+ if (!pmdemand_state)
>+ return -ENOMEM;
>+
>+ intel_atomic_global_obj_init(i915, &i915->display.pmdemand.obj,
>+ &pmdemand_state->base,
>+ &intel_pmdemand_funcs);
>+
>+ if (IS_MTL_DISPLAY_STEP(i915, STEP_A0, STEP_C0))
>+ /* Wa_14016740474 */
>+ intel_de_rmw(i915, XELPD_CHICKEN_DCPR_3, 0,
>DMD_RSP_TIMEOUT_DISABLE);
>+
>+ return 0;
>+}
>+
>+void intel_pmdemand_init_early(struct drm_i915_private *i915)
>+{
>+ mutex_init(&i915->display.pmdemand.lock);
>+ init_waitqueue_head(&i915->display.pmdemand.waitqueue);
>+}
>+
>+static void
>+intel_pmdemand_update_max_ddiclk(struct intel_atomic_state *state,
>+ struct intel_pmdemand_state *pmdemand_state)
>+{
>+ int max_ddiclk = 0;
>+ struct intel_crtc *crtc;
>+ int i;
>+ const struct intel_crtc_state *new_crtc_state;
>+
>+ for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
>+ pmdemand_state->ddi_clocks[crtc->pipe] =
>+ new_crtc_state->port_clock;
>+
>+ for (i = 0; i < ARRAY_SIZE(pmdemand_state->ddi_clocks); i++)
>+ max_ddiclk = max(pmdemand_state->ddi_clocks[i], max_ddiclk);
>+
>+ pmdemand_state->params.ddiclk_max = DIV_ROUND_UP(max_ddiclk, 1000);
>+}
>+
>+static void
>+intel_pmdemand_update_phys_mask(struct drm_i915_private *i915,
>+ struct intel_atomic_state *state,
>+ struct drm_connector_state *conn_state,
>+ bool for_old_state, u16 *phys_mask)
>+{
>+ struct intel_crtc *crtc = to_intel_crtc(conn_state->crtc);
>+ struct intel_encoder *encoder =
>to_intel_encoder(conn_state->best_encoder);
>+ struct intel_crtc_state *crtc_state;
>+ enum phy phy;
>+
>+ if (!crtc || !encoder)
I believe the safest thing here is to use conn_state->crtc and
conn_state->best_encoder in the condition.
This falls in the same type of argument used for our earlier discussion
on the explicit NULL check for the pmdemand_state. In my humble opinion,
we should only use the result of container_of() for valid pointers.
That said, I see that checking for NULL *after* conversions is done in
other parts of the driver, so I think other developers might not agree
with me here. So, your call on this :-)
>+ return;
>+
>+ phy = intel_port_to_phy(i915, encoder->port);
>+ if (intel_phy_is_tc(i915, phy))
>+ return;
>+
>+ if (for_old_state)
>+ crtc_state = intel_atomic_get_old_crtc_state(state, crtc);
>+ else
>+ crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
>+
>+ if (!crtc_state->hw.active)
>+ return;
>+
>+ if (for_old_state)
>+ *phys_mask &= ~BIT(phy);
>+ else
>+ *phys_mask |= BIT(phy);
>+}
>+
>+static void
>+intel_pmdemand_update_active_non_tc_phys(struct drm_i915_private *i915,
>+ struct intel_atomic_state *state,
>+ struct intel_pmdemand_state
>*pmdemand_state)
>+{
>+ u16 *phys_mask = &pmdemand_state->active_phys_mask;
>+ struct drm_connector *connector;
>+ int i;
>+ struct drm_connector_state *old_conn_state, *new_conn_state;
>+
>+ for_each_oldnew_connector_in_state(&state->base, connector,
>+ old_conn_state, new_conn_state, i)
>{
>+ if (!intel_connector_needs_modeset(state, connector))
>+ continue;
>+
>+ /* First clear the active phys in the old connector state */
>+ intel_pmdemand_update_phys_mask(i915, state, old_conn_state,
>+ true, phys_mask);
>+
>+ /* First set the active phys in new connector state */
s/First/Then/?
>+ intel_pmdemand_update_phys_mask(i915, state, new_conn_state,
>+ false, phys_mask);
>+ }
>+
>+ pmdemand_state->params.active_phys = hweight16(*phys_mask);
>+}
>+
>+static bool intel_pmdemand_phys_needs_update(struct intel_atomic_state *state)
>+{
>+ struct drm_connector *connector;
>+ int i;
>+ struct drm_connector_state *old_conn_state, *new_conn_state;
>+
>+ for_each_oldnew_connector_in_state(&state->base, connector,
>+ old_conn_state, new_conn_state, i)
>{
>+ struct intel_crtc *old_crtc =
>+ to_intel_crtc(old_conn_state->crtc);
>+ struct intel_crtc *new_crtc =
>+ to_intel_crtc(new_conn_state->crtc);
>+ struct intel_crtc_state *new_crtc_state, *old_crtc_state;
>+
>+ /* If the connector do not need modeset, no phys change */
>+ if (!intel_connector_needs_modeset(state, connector))
>+ continue;
I believe all of the checks below are already done once we call
intel_connector_needs_modeset(). In that case, I guess this loop could
be inlined directly in intel_pmdemand_needs_update() since it becomes a
simple one.
>+
>+ /* If crtcs are different, update phys */
>+ if (old_crtc != new_crtc)
>+ return true;
>+
>+ if (!new_crtc)
>+ continue;
>+
>+ /* If crtc state's active status changed, update the phys */
>+ old_crtc_state = intel_atomic_get_old_crtc_state(state,
>+ new_crtc);
>+ new_crtc_state = intel_atomic_get_old_crtc_state(state,
>+ new_crtc);
>+ if (old_crtc_state->hw.active != new_crtc_state->hw.active)
>+ return true;
>+ }
>+
>+ return false;
>+}
>+
>+static bool intel_pmdemand_needs_update(struct intel_atomic_state *state)
>+{
>+ struct intel_crtc *crtc;
>+ int i;
>+ const struct intel_bw_state *new_bw_state, *old_bw_state;
>+ const struct intel_cdclk_state *new_cdclk_state, *old_cdclk_state;
>+ const struct intel_crtc_state *new_crtc_state, *old_crtc_state;
>+ const struct intel_dbuf_state *new_dbuf_state, *old_dbuf_state;
>+
>+ new_bw_state = intel_atomic_get_new_bw_state(state);
>+ old_bw_state = intel_atomic_get_old_bw_state(state);
>+ if (new_bw_state && new_bw_state->qgv_point_peakbw !=
>+ old_bw_state->qgv_point_peakbw)
>+ return true;
>+
>+ new_dbuf_state = intel_atomic_get_new_dbuf_state(state);
>+ old_dbuf_state = intel_atomic_get_old_dbuf_state(state);
>+ if (new_dbuf_state &&
>+ (new_dbuf_state->active_pipes !=
>+ old_dbuf_state->active_pipes ||
>+ new_dbuf_state->enabled_slices !=
>+ old_dbuf_state->enabled_slices))
>+ return true;
>+
>+ new_cdclk_state = intel_atomic_get_new_cdclk_state(state);
>+ old_cdclk_state = intel_atomic_get_old_cdclk_state(state);
>+ if (new_cdclk_state &&
>+ (new_cdclk_state->actual.cdclk !=
>+ old_cdclk_state->actual.cdclk ||
>+ new_cdclk_state->actual.voltage_level !=
>+ old_cdclk_state->actual.voltage_level))
>+ return true;
>+
>+ for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
>+ new_crtc_state, i)
>+ if (new_crtc_state->port_clock != old_crtc_state->port_clock)
>+ return true;
>+
>+ return intel_pmdemand_phys_needs_update(state);
>+}
>+
>+int intel_pmdemand_atomic_check(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ const struct intel_bw_state *new_bw_state;
>+ const struct intel_cdclk_state *new_cdclk_state;
>+ const struct intel_dbuf_state *new_dbuf_state;
>+ struct intel_pmdemand_state *new_pmdemand_state;
>+ int ret;
>+
>+ if (DISPLAY_VER(i915) < 14)
>+ return 0;
>+
>+ if (!intel_pmdemand_needs_update(state))
>+ return 0;
>+
>+ new_pmdemand_state = intel_atomic_get_pmdemand_state(state);
>+ if (IS_ERR(new_pmdemand_state))
>+ return PTR_ERR(new_pmdemand_state);
>+
>+ ret = intel_atomic_lock_global_state(&new_pmdemand_state->base);
>+ if (ret)
>+ return ret;
>+
>+ new_bw_state = intel_atomic_get_bw_state(state);
>+ if (IS_ERR(new_bw_state))
>+ return PTR_ERR(new_bw_state);
>+
>+ /* firmware will calculate the qclck_gc_index, requirement is set to
>0 */
>+ new_pmdemand_state->params.qclk_gv_index = 0;
>+ new_pmdemand_state->params.qclk_gv_bw =
>+ min_t(u16, new_bw_state->qgv_point_peakbw, 0xffff);
>+
>+ new_dbuf_state = intel_atomic_get_dbuf_state(state);
>+ if (IS_ERR(new_dbuf_state))
>+ return PTR_ERR(new_dbuf_state);
>+
>+ new_pmdemand_state->params.active_pipes =
>+ min_t(u8, hweight8(new_dbuf_state->active_pipes), 3);
>+ new_pmdemand_state->params.active_dbufs =
>+ min_t(u8,
>+ hweight8(BIT(DBUF_S1) | new_dbuf_state->enabled_slices),
>+ 3);
>+
>+ new_cdclk_state = intel_atomic_get_cdclk_state(state);
>+ if (IS_ERR(new_cdclk_state))
>+ return PTR_ERR(new_cdclk_state);
>+
>+ new_pmdemand_state->params.voltage_index =
>+ new_cdclk_state->actual.voltage_level;
>+ new_pmdemand_state->params.cdclk_freq_mhz =
>+ DIV_ROUND_UP(new_cdclk_state->actual.cdclk, 1000);
>+
>+ intel_pmdemand_update_max_ddiclk(state, new_pmdemand_state);
>+
>+ intel_pmdemand_update_active_non_tc_phys(i915, state,
>new_pmdemand_state);
>+
>+ /*
>+ * Setting scalers to max as it can not be calculated during flips and
>+ * fastsets without taking global states locks.
>+ */
>+ new_pmdemand_state->params.scalers = 7;
>+
>+ ret = intel_atomic_serialize_global_state(&new_pmdemand_state->base);
>+ if (ret)
>+ return ret;
>+
>+ return 0;
>+}
>+
>+static bool intel_pmdemand_check_prev_transaction(struct drm_i915_private
>*i915)
>+{
>+ return !(intel_de_wait_for_clear(i915,
>+ XELPDP_INITIATE_PMDEMAND_REQUEST(1),
>+ XELPDP_PMDEMAND_REQ_ENABLE, 10) ||
>+ intel_de_wait_for_clear(i915,
>+ GEN12_DCPR_STATUS_1,
>+ XELPDP_PMDEMAND_INFLIGHT_STATUS,
>10));
>+}
>+
>+static bool intel_pmdemand_req_complete(struct drm_i915_private *i915)
>+{
>+ return !(intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1)) &
>+ XELPDP_PMDEMAND_REQ_ENABLE);
>+}
>+
>+static void intel_pmdemand_wait(struct drm_i915_private *i915)
>+{
>+ const unsigned int timeout_ms = 10;
>+
>+ if (!wait_event_timeout(i915->display.pmdemand.waitqueue,
>+ intel_pmdemand_req_complete(i915),
>+ msecs_to_jiffies_timeout(timeout_ms)))
>+ drm_err(&i915->drm,
>+ "timed out waiting for Punit PM Demand Response\n");
>+}
>+
>+/* Required to be programmed during Display Init Sequences. */
>+void intel_pmdemand_program_dbuf(struct drm_i915_private *i915,
>+ u8 dbuf_slices)
>+{
>+ u32 dbufs = min_t(u32, hweight8(dbuf_slices), 3);
>+
>+ mutex_lock(&i915->display.pmdemand.lock);
>+ if (drm_WARN_ON(&i915->drm,
>+ !intel_pmdemand_check_prev_transaction(i915)))
>+ goto unlock;
>+
>+ intel_de_rmw(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(0),
>+ XELPDP_PMDEMAND_DBUFS_MASK,
>XELPDP_PMDEMAND_DBUFS(dbufs));
>+ intel_de_rmw(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1), 0,
>+ XELPDP_PMDEMAND_REQ_ENABLE);
>+
>+ intel_pmdemand_wait(i915);
>+
>+unlock:
>+ mutex_unlock(&i915->display.pmdemand.lock);
>+}
>+
>+static void
>+intel_pmdemand_update_params(const struct intel_pmdemand_state *new,
>+ const struct intel_pmdemand_state *old,
>+ u32 *reg1, u32 *reg2)
>+{
>+ u32 plls, tmp;
>+
>+ /*
>+ * The pmdemand parameter updates happens in two steps. Pre plane and
>+ * post plane updates. During the pre plane, as DE might still be
>+ * handling with some old operations, to avoid unwanted performance
>+ * issues, program the pmdemand parameters with higher of old and new
>+ * values. And then after once settled, use the new parameter values
>+ * as part of the post plane update.
>+ */
>+
>+ /* Set 1*/
>+ *reg1 &= ~XELPDP_PMDEMAND_QCLK_GV_BW_MASK;
>+ tmp = old ? max(old->params.qclk_gv_bw, new->params.qclk_gv_bw) :
>+ new->params.qclk_gv_bw;
>+ *reg1 |= XELPDP_PMDEMAND_QCLK_GV_BW(tmp);
>+
>+ *reg1 &= ~XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK;
>+ tmp = old ? max(old->params.voltage_index, new->params.voltage_index)
>:
>+ new->params.voltage_index;
>+ *reg1 |= XELPDP_PMDEMAND_VOLTAGE_INDEX(tmp);
>+
>+ *reg1 &= ~XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK;
>+ tmp = old ? max(old->params.qclk_gv_index, new->params.qclk_gv_index)
>:
>+ new->params.qclk_gv_index;
>+ *reg1 |= XELPDP_PMDEMAND_QCLK_GV_INDEX(tmp);
>+
>+ *reg1 &= ~XELPDP_PMDEMAND_PIPES_MASK;
>+ tmp = old ? max(old->params.active_pipes, new->params.active_pipes) :
>+ new->params.active_pipes;
>+ *reg1 |= XELPDP_PMDEMAND_PIPES(tmp);
>+
>+ *reg1 &= ~XELPDP_PMDEMAND_DBUFS_MASK;
>+ tmp = old ? max(old->params.active_dbufs, new->params.active_dbufs) :
>+ new->params.active_dbufs;
>+ *reg1 |= XELPDP_PMDEMAND_DBUFS(tmp);
>+
>+ *reg1 &= ~XELPDP_PMDEMAND_PHYS_MASK;
>+ plls = old ? max(old->params.active_phys, new->params.active_phys) :
>+ new->params.active_phys;
>+ plls = min_t(u32, plls, 7);
>+ *reg1 |= XELPDP_PMDEMAND_PHYS(plls);
>+
>+ /* Set 2*/
>+ *reg2 &= ~XELPDP_PMDEMAND_CDCLK_FREQ_MASK;
>+ tmp = old ? max(old->params.cdclk_freq_mhz,
>+ new->params.cdclk_freq_mhz) :
>+ new->params.cdclk_freq_mhz;
>+ *reg2 |= XELPDP_PMDEMAND_CDCLK_FREQ(tmp);
>+
>+ *reg2 &= ~XELPDP_PMDEMAND_DDICLK_FREQ_MASK;
>+ tmp = old ? max(old->params.ddiclk_max, new->params.ddiclk_max) :
>+ new->params.ddiclk_max;
>+ *reg2 |= XELPDP_PMDEMAND_DDICLK_FREQ(tmp);
>+
>+ *reg2 &= ~XELPDP_PMDEMAND_SCALERS_MASK;
>+ tmp = old ? max(old->params.scalers, new->params.scalers) :
>+ new->params.scalers;
>+ *reg2 |= XELPDP_PMDEMAND_SCALERS(tmp);
>+
>+ /*
>+ * Active_PLLs starts with 1 because of CDCLK PLL.
>+ * TODO: Missing to account genlock filter when it gets used.
>+ */
>+ plls = min_t(u32, plls + 1, 7);
>+ *reg2 &= ~XELPDP_PMDEMAND_PLLS_MASK;
>+ *reg2 |= XELPDP_PMDEMAND_PLLS(plls);
>+}
>+
>+static void
>+intel_pmdemand_program_params(struct drm_i915_private *i915,
>+ const struct intel_pmdemand_state *new,
>+ const struct intel_pmdemand_state *old)
>+{
>+ bool changed = false;
>+ u32 reg1, mod_reg1;
>+ u32 reg2, mod_reg2;
>+
>+ mutex_lock(&i915->display.pmdemand.lock);
>+ if (drm_WARN_ON(&i915->drm,
>+ !intel_pmdemand_check_prev_transaction(i915)))
>+ goto unlock;
>+
>+ reg1 = intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(0));
>+ mod_reg1 = reg1;
>+
>+ reg2 = intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1));
>+ mod_reg2 = reg2;
>+
>+ intel_pmdemand_update_params(new, old, &mod_reg1, &mod_reg2);
>+
>+ if (reg1 != mod_reg1) {
>+ intel_de_write(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(0),
>+ mod_reg1);
>+ changed = true;
>+ }
>+
>+ if (reg2 != mod_reg2) {
>+ intel_de_write(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1),
>+ mod_reg2);
>+ changed = true;
>+ }
>+
>+ /* Initiate pm demand request only if register values are changed */
>+ if (!changed)
>+ goto unlock;
>+
>+ drm_dbg_kms(&i915->drm,
>+ "initate pmdemand request values: (0x%x 0x%x)\n",
>+ mod_reg1, mod_reg2);
>+
>+ intel_de_rmw(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1), 0,
>+ XELPDP_PMDEMAND_REQ_ENABLE);
>+
>+ intel_pmdemand_wait(i915);
>+
>+unlock:
>+ mutex_unlock(&i915->display.pmdemand.lock);
>+}
>+
>+static bool
>+intel_pmdemand_state_changed(const struct intel_pmdemand_state *new,
>+ const struct intel_pmdemand_state *old)
>+{
>+ return memcmp(&new->params, &old->params, sizeof(new->params)) != 0;
>+}
>+
>+void intel_pmdemand_pre_plane_update(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ const struct intel_pmdemand_state *new_pmdemand_state =
>+ intel_atomic_get_new_pmdemand_state(state);
>+ const struct intel_pmdemand_state *old_pmdemand_state =
>+ intel_atomic_get_old_pmdemand_state(state);
>+
>+ if (DISPLAY_VER(i915) < 14)
>+ return;
>+
>+ if (!new_pmdemand_state ||
>+ !intel_pmdemand_state_changed(new_pmdemand_state,
>+ old_pmdemand_state))
>+ return;
>+
>+ WARN_ON(!new_pmdemand_state->base.changed);
>+
>+ intel_pmdemand_program_params(i915, new_pmdemand_state,
>+ old_pmdemand_state);
>+}
>+
>+void intel_pmdemand_post_plane_update(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ const struct intel_pmdemand_state *new_pmdemand_state =
>+ intel_atomic_get_new_pmdemand_state(state);
>+ const struct intel_pmdemand_state *old_pmdemand_state =
>+ intel_atomic_get_old_pmdemand_state(state);
>+
>+ if (DISPLAY_VER(i915) < 14)
>+ return;
>+
>+ if (!new_pmdemand_state ||
>+ !intel_pmdemand_state_changed(new_pmdemand_state,
>+ old_pmdemand_state))
>+ return;
>+
>+ WARN_ON(!new_pmdemand_state->base.changed);
>+
>+ intel_pmdemand_program_params(i915, new_pmdemand_state, NULL);
>+}
>diff --git a/drivers/gpu/drm/i915/display/intel_pmdemand.h
>b/drivers/gpu/drm/i915/display/intel_pmdemand.h
>new file mode 100644
>index 000000000000..c1c9b93934bb
>--- /dev/null
>+++ b/drivers/gpu/drm/i915/display/intel_pmdemand.h
>@@ -0,0 +1,56 @@
>+/* SPDX-License-Identifier: MIT */
>+/*
>+ * Copyright © 2023 Intel Corporation
>+ */
>+
>+#ifndef __INTEL_PMDEMAND_H__
>+#define __INTEL_PMDEMAND_H__
>+
>+#include "intel_display_limits.h"
>+#include "intel_global_state.h"
>+
>+struct drm_i915_private;
>+struct intel_atomic_state;
>+struct intel_crtc_state;
>+struct intel_plane_state;
>+
>+struct pmdemand_params {
>+ u16 qclk_gv_bw;
>+ u8 voltage_index;
>+ u8 qclk_gv_index;
>+ u8 active_pipes;
>+ u8 active_dbufs;
>+ /* Total number of non type C active phys from active_phys_mask */
>+ u8 active_phys;
>+ u16 cdclk_freq_mhz;
>+ /* max from ddi_clocks[] */
>+ u16 ddiclk_max;
>+ u8 scalers;
>+};
>+
>+struct intel_pmdemand_state {
>+ struct intel_global_state base;
>+
>+ /* Maintain a persistent list of port clocks across all crtcs */
>+ int ddi_clocks[I915_MAX_PIPES];
>+
>+ /* Maintain a persistent list of non type C phys mask */
>+ u16 active_phys_mask;
>+
>+ /* Parameters to be configured in the pmdemand registers */
>+ struct pmdemand_params params;
>+};
>+
>+#define to_intel_pmdemand_state(x) container_of((x), \
>+ struct intel_pmdemand_state, \
>+ base)
>+
>+void intel_pmdemand_init_early(struct drm_i915_private *i915);
>+int intel_pmdemand_init(struct drm_i915_private *i915);
>+void intel_pmdemand_program_dbuf(struct drm_i915_private *i915,
>+ u8 dbuf_slices);
>+void intel_pmdemand_pre_plane_update(struct intel_atomic_state *state);
>+void intel_pmdemand_post_plane_update(struct intel_atomic_state *state);
>+int intel_pmdemand_atomic_check(struct intel_atomic_state *state);
>+
>+#endif /* __INTEL_PMDEMAND_H__ */
>diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>index 0523418129c5..6d34d9f59b1c 100644
>--- a/drivers/gpu/drm/i915/i915_reg.h
>+++ b/drivers/gpu/drm/i915/i915_reg.h
>@@ -4418,8 +4418,10 @@
> #define GEN8_DE_MISC_IMR _MMIO(0x44464)
> #define GEN8_DE_MISC_IIR _MMIO(0x44468)
> #define GEN8_DE_MISC_IER _MMIO(0x4446c)
>-#define GEN8_DE_MISC_GSE (1 << 27)
>-#define GEN8_DE_EDP_PSR (1 << 19)
>+#define XELPDP_PMDEMAND_RSPTOUT_ERR REG_BIT(27)
>+#define GEN8_DE_MISC_GSE REG_BIT(27)
>+#define GEN8_DE_EDP_PSR REG_BIT(19)
>+#define XELPDP_PMDEMAND_RSP REG_BIT(3)
>
> #define GEN8_PCU_ISR _MMIO(0x444e0)
> #define GEN8_PCU_IMR _MMIO(0x444e4)
>@@ -4504,6 +4506,33 @@
> #define XELPDP_DP_ALT_HPD_LONG_DETECT REG_BIT(1)
> #define XELPDP_DP_ALT_HPD_SHORT_DETECT REG_BIT(0)
>
>+#define XELPDP_INITIATE_PMDEMAND_REQUEST(dword) _MMIO(0x45230
>+ 4 * (dword))
>+#define XELPDP_PMDEMAND_QCLK_GV_BW_MASK REG_GENMASK(31, 16)
>+#define XELPDP_PMDEMAND_QCLK_GV_BW(x)
>REG_FIELD_PREP(XELPDP_PMDEMAND_QCLK_GV_BW_MASK, x)
>+#define XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK REG_GENMASK(14, 12)
>+#define XELPDP_PMDEMAND_VOLTAGE_INDEX(x)
>REG_FIELD_PREP(XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK, x)
>+#define XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK REG_GENMASK(11, 8)
>+#define XELPDP_PMDEMAND_QCLK_GV_INDEX(x)
>REG_FIELD_PREP(XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK, x)
>+#define XELPDP_PMDEMAND_PIPES_MASK REG_GENMASK(7, 6)
>+#define XELPDP_PMDEMAND_PIPES(x)
>REG_FIELD_PREP(XELPDP_PMDEMAND_PIPES_MASK, x)
>+#define XELPDP_PMDEMAND_DBUFS_MASK REG_GENMASK(5, 4)
>+#define XELPDP_PMDEMAND_DBUFS(x)
>REG_FIELD_PREP(XELPDP_PMDEMAND_DBUFS_MASK, x)
>+#define XELPDP_PMDEMAND_PHYS_MASK REG_GENMASK(2, 0)
>+#define XELPDP_PMDEMAND_PHYS(x)
>REG_FIELD_PREP(XELPDP_PMDEMAND_PHYS_MASK, x)
>+
>+#define XELPDP_PMDEMAND_REQ_ENABLE REG_BIT(31)
>+#define XELPDP_PMDEMAND_CDCLK_FREQ_MASK REG_GENMASK(30, 20)
>+#define XELPDP_PMDEMAND_CDCLK_FREQ(x)
>REG_FIELD_PREP(XELPDP_PMDEMAND_CDCLK_FREQ_MASK, x)
>+#define XELPDP_PMDEMAND_DDICLK_FREQ_MASK REG_GENMASK(18, 8)
>+#define XELPDP_PMDEMAND_DDICLK_FREQ(x)
>REG_FIELD_PREP(XELPDP_PMDEMAND_DDICLK_FREQ_MASK, x)
>+#define XELPDP_PMDEMAND_SCALERS_MASK REG_GENMASK(6, 4)
>+#define XELPDP_PMDEMAND_SCALERS(x)
>REG_FIELD_PREP(XELPDP_PMDEMAND_SCALERS_MASK, x)
>+#define XELPDP_PMDEMAND_PLLS_MASK REG_GENMASK(2, 0)
>+#define XELPDP_PMDEMAND_PLLS(x)
>REG_FIELD_PREP(XELPDP_PMDEMAND_PLLS_MASK, x)
>+
>+#define GEN12_DCPR_STATUS_1 _MMIO(0x46440)
>+#define XELPDP_PMDEMAND_INFLIGHT_STATUS REG_BIT(26)
>+
> #define ILK_DISPLAY_CHICKEN2 _MMIO(0x42004)
> /* Required on all Ironlake and Sandybridge according to the B-Spec. */
> #define ILK_ELPIN_409_SELECT REG_BIT(25)
>@@ -4663,6 +4692,9 @@
> #define DCPR_SEND_RESP_IMM REG_BIT(25)
> #define DCPR_CLEAR_MEMSTAT_DIS REG_BIT(24)
>
>+#define XELPD_CHICKEN_DCPR_3 _MMIO(0x46438)
>+#define DMD_RSP_TIMEOUT_DISABLE REG_BIT(19)
>+
> #define SKL_DFSM _MMIO(0x51000)
> #define SKL_DFSM_DISPLAY_PM_DISABLE (1 << 27)
> #define SKL_DFSM_DISPLAY_HDCP_DISABLE (1 << 25)
>--
>2.34.1
>
