Starting from DP2.0 specs, DPCD 248h is renamed LINK_QUAL_PATTERN_SELECT and it has the same values of registers DPCD 10Bh-10Eh. Use the PHY pattern names defined for DPCD 10Bh-10Eh in order to add CP2520 Pattern 3 (TPS4) phy pattern support in the next patch of this series and DP2.1 PHY patterns for future series.
CC: Jani Nikula <[email protected]> Cc: Imre Deak <[email protected]> Cc: Lee Shawn C <[email protected]> Signed-off-by: Khaled Almahallawy <[email protected]> --- drivers/gpu/drm/i915/display/intel_dp.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 0cc57681dc4d..08b607288a6a 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -3882,27 +3882,27 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp, u32 pattern_val; switch (data->phy_pattern) { - case DP_PHY_TEST_PATTERN_NONE: + case DP_LINK_QUAL_PATTERN_DISABLE: drm_dbg_kms(&dev_priv->drm, "Disable Phy Test Pattern\n"); intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0); break; - case DP_PHY_TEST_PATTERN_D10_2: + case DP_LINK_QUAL_PATTERN_D10_2: drm_dbg_kms(&dev_priv->drm, "Set D10.2 Phy Test Pattern\n"); intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2); break; - case DP_PHY_TEST_PATTERN_ERROR_COUNT: + case DP_LINK_QUAL_PATTERN_ERROR_RATE: drm_dbg_kms(&dev_priv->drm, "Set Error Count Phy Test Pattern\n"); intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_SCRAMBLED_0); break; - case DP_PHY_TEST_PATTERN_PRBS7: + case DP_LINK_QUAL_PATTERN_PRBS7: drm_dbg_kms(&dev_priv->drm, "Set PRBS7 Phy Test Pattern\n"); intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7); break; - case DP_PHY_TEST_PATTERN_80BIT_CUSTOM: + case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM: /* * FIXME: Ideally pattern should come from DPCD 0x250. As * current firmware of DPR-100 could not set it, so hardcoding @@ -3920,7 +3920,7 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp, DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_CUSTOM80); break; - case DP_PHY_TEST_PATTERN_CP2520: + case DP_LINK_QUAL_PATTERN_CP2520_PAT_1: /* * FIXME: Ideally pattern should come from DPCD 0x24A. As * current firmware of DPR-100 could not set it, so hardcoding -- 2.34.1
