On 01/24/14 14:52, Ville Syrjälä wrote: > On Fri, Jan 24, 2014 at 02:13:14PM +0200, Antti Koskipaa wrote: >> +#define PIPE_A_OFFSET 0x70000 >> +#define PIPE_B_OFFSET 0x71000 >> +#define PIPE_C_OFFSET 0x72000 > > I'd like a comment here to explain what PIPE_EDP_OFFSET > actually means. Eg.: > > /* > * There's actually no pipe EDP. Some pipe registers have > * simply shifted from the pipe to the transcoder, while > * keeping their original offset. Thus we need PIPE_EDP_OFFSET > * to access such registers in transcoder EDP. > */
Ok. >> #define TRANS_DDI_FUNC_CTL_B 0x61400 >> #define TRANS_DDI_FUNC_CTL_C 0x62400 >> #define TRANS_DDI_FUNC_CTL_EDP 0x6F400 >> -#define TRANS_DDI_FUNC_CTL(tran) _TRANSCODER(tran, TRANS_DDI_FUNC_CTL_A, \ >> - TRANS_DDI_FUNC_CTL_B) >> +#define TRANS_DDI_FUNC_CTL(tran) >> (dev_priv->info->trans_ddi_func_offsets[tran]) >> + > > Why is there a separate offset for these? They're all within the > normal transcoder range, aren't they? Yes, they are. Will use _TRANSCODER2 for those too. >> #define TRANS_DDI_FUNC_ENABLE (1<<31) >> /* Those bits are ignored by pipe EDP since it can only connect to DDI A */ >> #define TRANS_DDI_PORT_MASK (7<<28) >> @@ -5343,10 +5362,12 @@ >> #define TRANS_CLK_SEL_DISABLED (0x0<<29) >> #define TRANS_CLK_SEL_PORT(x) ((x+1)<<29) >> >> -#define _TRANSA_MSA_MISC 0x60410 >> -#define _TRANSB_MSA_MISC 0x61410 >> -#define TRANS_MSA_MISC(tran) _TRANSCODER(tran, _TRANSA_MSA_MISC, \ >> - _TRANSB_MSA_MISC) >> +#define TRANSA_MSA_MISC 0x60410 >> +#define TRANSB_MSA_MISC 0x61410 >> +#define TRANSC_MSA_MISC 0x62410 >> +#define TRANS_EDP_MSA_MISC 0x6f410 >> +#define TRANS_MSA_MISC(tran) (dev_priv->info->trans_msa_misc_offsets[tran]) > > ditto Ditto. -- - Antti _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
