> -----Original Message----- > From: Sousa, Gustavo <[email protected]> > Sent: Monday, August 14, 2023 4:13 PM > To: [email protected] > Cc: Nikula, Jani <[email protected]>; Kahola, Mika <[email protected]> > Subject: [PATCH v2 2/4] drm/i915: Simplify intel_cx0_program_phy_lane() with > loop > > It is possible to generalize the "disable" value for the transmitters to be a > bit mask based on the port width and the port reversal > boolean, with a small exception for DP-alt mode with "x1" port width. > > Simplify the code by using such a mask and a for-loop instead of using > switch-case statements. > > v2: > - Use (i < 2) instead of (i / 2 == 0) for PHY lane mask selection. > (Jani) > > BSpec: 64539 > Cc: Jani Nikula <[email protected]>
Looks ok to me. Reviewed-by: Mika Kahola <[email protected]> > Signed-off-by: Gustavo Sousa <[email protected]> > --- > drivers/gpu/drm/i915/display/intel_cx0_phy.c | 79 +++++--------------- > 1 file changed, 20 insertions(+), 59 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c > b/drivers/gpu/drm/i915/display/intel_cx0_phy.c > index b903ceb0b56a..2b112ed78943 100644 > --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c > +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c > @@ -2604,7 +2604,8 @@ static void intel_cx0_program_phy_lane(struct > drm_i915_private *i915, > struct intel_encoder *encoder, int > lane_count, > bool lane_reversal) > { > - u8 l0t1, l0t2, l1t1, l1t2; > + int i; > + u8 disables; > bool dp_alt_mode = > intel_tc_port_in_dp_alt_mode(enc_to_dig_port(encoder)); > enum port port = encoder->port; > > @@ -2614,66 +2615,26 @@ static void intel_cx0_program_phy_lane(struct > drm_i915_private *i915, > C10_VDR_CTRL_MSGBUS_ACCESS, > MB_WRITE_COMMITTED); > > - /* TODO: DP-alt MFD case where only one PHY lane should be programmed. > */ > - l0t1 = intel_cx0_read(i915, port, INTEL_CX0_LANE0, > PHY_CX0_TX_CONTROL(1, 2)); > - l0t2 = intel_cx0_read(i915, port, INTEL_CX0_LANE0, > PHY_CX0_TX_CONTROL(2, 2)); > - l1t1 = intel_cx0_read(i915, port, INTEL_CX0_LANE1, > PHY_CX0_TX_CONTROL(1, 2)); > - l1t2 = intel_cx0_read(i915, port, INTEL_CX0_LANE1, > PHY_CX0_TX_CONTROL(2, 2)); > - > - l0t1 |= CONTROL2_DISABLE_SINGLE_TX; > - l0t2 |= CONTROL2_DISABLE_SINGLE_TX; > - l1t1 |= CONTROL2_DISABLE_SINGLE_TX; > - l1t2 |= CONTROL2_DISABLE_SINGLE_TX; > - > - if (lane_reversal) { > - switch (lane_count) { > - case 4: > - l0t1 &= ~CONTROL2_DISABLE_SINGLE_TX; > - fallthrough; > - case 3: > - l0t2 &= ~CONTROL2_DISABLE_SINGLE_TX; > - fallthrough; > - case 2: > - l1t1 &= ~CONTROL2_DISABLE_SINGLE_TX; > - fallthrough; > - case 1: > - l1t2 &= ~CONTROL2_DISABLE_SINGLE_TX; > - break; > - default: > - MISSING_CASE(lane_count); > - } > - } else { > - switch (lane_count) { > - case 4: > - l1t2 &= ~CONTROL2_DISABLE_SINGLE_TX; > - fallthrough; > - case 3: > - l1t1 &= ~CONTROL2_DISABLE_SINGLE_TX; > - fallthrough; > - case 2: > - l0t2 &= ~CONTROL2_DISABLE_SINGLE_TX; > - l0t1 &= ~CONTROL2_DISABLE_SINGLE_TX; > - break; > - case 1: > - if (dp_alt_mode) > - l0t2 &= ~CONTROL2_DISABLE_SINGLE_TX; > - else > - l0t1 &= ~CONTROL2_DISABLE_SINGLE_TX; > - break; > - default: > - MISSING_CASE(lane_count); > - } > + if (lane_reversal) > + disables = REG_GENMASK8(3, 0) >> lane_count; > + else > + disables = REG_GENMASK8(3, 0) << lane_count; > + > + if (dp_alt_mode && lane_count == 1) { > + disables &= ~REG_GENMASK8(1, 0); > + disables |= REG_FIELD_PREP8(REG_GENMASK8(1, 0), 0x1); > } > > - /* disable MLs */ > - intel_cx0_write(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(1, 2), > - l0t1, MB_WRITE_COMMITTED); > - intel_cx0_write(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(2, 2), > - l0t2, MB_WRITE_COMMITTED); > - intel_cx0_write(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(1, 2), > - l1t1, MB_WRITE_COMMITTED); > - intel_cx0_write(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(2, 2), > - l1t2, MB_WRITE_COMMITTED); > + /* TODO: DP-alt MFD case where only one PHY lane should be programmed. > */ > + for (i = 0; i < 4; i++) { > + int tx = i % 2 + 1; > + u8 lane_mask = i < 2 ? INTEL_CX0_LANE0 : INTEL_CX0_LANE1; > + > + intel_cx0_rmw(i915, port, lane_mask, PHY_CX0_TX_CONTROL(tx, 2), > + CONTROL2_DISABLE_SINGLE_TX, > + disables & BIT(i) ? CONTROL2_DISABLE_SINGLE_TX : > 0, > + MB_WRITE_COMMITTED); > + } > > if (intel_is_c10phy(i915, intel_port_to_phy(i915, port))) > intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, > -- > 2.41.0
