Added intel_pcode_probe, promoted wait for lmem init and
intel_pcode_init prior to mmio_probe during load,
so that GT registers can be accessed only after this, else MCA
is observed.

Signed-off-by: Sujaritha Sundaresan <[email protected]>
---
 drivers/gpu/drm/i915/i915_driver.c  | 37 ++++++++++++++++++++++++-----
 drivers/gpu/drm/i915/intel_uncore.c | 12 ----------
 2 files changed, 31 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_driver.c 
b/drivers/gpu/drm/i915/i915_driver.c
index f8dbee7a5af7..92cafceaf447 100644
--- a/drivers/gpu/drm/i915/i915_driver.c
+++ b/drivers/gpu/drm/i915/i915_driver.c
@@ -93,6 +93,7 @@
 #include "i915_memcpy.h"
 #include "i915_perf.h"
 #include "i915_query.h"
+#include "i915_reg.h"
 #include "i915_suspend.h"
 #include "i915_switcheroo.h"
 #include "i915_sysfs.h"
@@ -436,6 +437,32 @@ static int i915_pcode_init(struct drm_i915_private *i915)
        return 0;
 }
 
+static int intel_pcode_probe(struct drm_i915_private *i915)
+{
+       struct intel_uncore *uncore;
+       int ret;
+
+       /*
+        * The boot firmware initializes local memory and assesses its health.
+        * If memory training fails, the punit will have been instructed to
+        * keep the GT powered down; we won't be able to communicate with it
+        * and we should not continue with driver initialization.
+        */
+       if (IS_DGFX(i915) &&
+               !(__raw_uncore_read32(uncore, GU_CNTL) & LMEM_INIT)) {
+               drm_err(&i915->drm, "LMEM not initialized by firmware\n");
+               return -ENODEV;
+       }
+
+       /*
+        * Driver handshakes with pcode via mailbox command to know that SoC
+        * initialization is complete before proceeding further
+        */
+       ret = i915_pcode_init(i915);
+
+       return ret;
+}
+
 /**
  * i915_driver_hw_probe - setup state requiring device access
  * @dev_priv: device private
@@ -547,10 +574,6 @@ static int i915_driver_hw_probe(struct drm_i915_private 
*dev_priv)
 
        intel_opregion_setup(dev_priv);
 
-       ret = i915_pcode_init(dev_priv);
-       if (ret)
-               goto err_opregion;
-
        /*
         * Fill the dram structure to get the system dram info. This will be
         * used for memory latency calculation.
@@ -561,8 +584,6 @@ static int i915_driver_hw_probe(struct drm_i915_private 
*dev_priv)
 
        return 0;
 
-err_opregion:
-       intel_opregion_cleanup(dev_priv);
 err_msi:
        if (pdev->msi_enabled)
                pci_disable_msi(pdev);
@@ -778,6 +799,10 @@ int i915_driver_probe(struct pci_dev *pdev, const struct 
pci_device_id *ent)
        if (ret < 0)
                goto out_runtime_pm_put;
 
+       ret = intel_pcode_probe(i915);
+       if (ret)
+               goto out_tiles_cleanup;
+
        ret = i915_driver_mmio_probe(i915);
        if (ret < 0)
                goto out_tiles_cleanup;
diff --git a/drivers/gpu/drm/i915/intel_uncore.c 
b/drivers/gpu/drm/i915/intel_uncore.c
index dfefad5a5fec..4a353d4adf86 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -2658,18 +2658,6 @@ int intel_uncore_init_mmio(struct intel_uncore *uncore)
        if (ret)
                return ret;
 
-       /*
-        * The boot firmware initializes local memory and assesses its health.
-        * If memory training fails, the punit will have been instructed to
-        * keep the GT powered down; we won't be able to communicate with it
-        * and we should not continue with driver initialization.
-        */
-       if (IS_DGFX(i915) &&
-           !(__raw_uncore_read32(uncore, GU_CNTL) & LMEM_INIT)) {
-               drm_err(&i915->drm, "LMEM not initialized by firmware\n");
-               return -ENODEV;
-       }
-
        if (GRAPHICS_VER(i915) > 5 && !intel_vgpu_active(i915))
                uncore->flags |= UNCORE_HAS_FORCEWAKE;
 
-- 
2.41.0

Reply via email to