On Wed, 29 Jan 2014, [email protected] wrote:
> From: Brad Volkin <[email protected]>
>
> Various commands that access memory have a bit to determine whether
> the graphics address specified in the command should use the GGTT or
> PPGTT for translation. These checks ensure that the bit indicates
> PPGTT translation.
>
> Most of these checks use the existing bit-checking infrastructure.
> The PIPE_CONTROL and MI_FLUSH_DW commands, however, are multi-function
> commands. The GGTT/PPGTT bit is only relevant for certain uses of the
> command. As such, this change also extends the bit-checking code to
> include a "condition" mask and offset. If the condition mask is non-zero
> then the parser only performs the bit check when the bits specified by
> the condition mask/offset are also non-zero.
>
> NOTE: At this point in the series PPGTT must be enabled for the parser
> to work correctly. If it's not enabled, userspace will not be setting
> the PPGTT bits the way the parser requires. VLV is the only platform
> where this is a problem, so at this point, we disable parsing for VLV.
>
> OTC-Tracker: AXIA-4631
> Change-Id: I3f4c76b6734f1956ec47e698230f97d0998ff92b
> Signed-off-by: Brad Volkin <[email protected]>
> ---
> drivers/gpu/drm/i915/i915_cmd_parser.c | 147
> +++++++++++++++++++++++++++++----
> drivers/gpu/drm/i915/i915_drv.h | 6 ++
> drivers/gpu/drm/i915/i915_reg.h | 6 ++
> 3 files changed, 144 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c
> b/drivers/gpu/drm/i915/i915_cmd_parser.c
> index 7de7c6a..26072a2 100644
> --- a/drivers/gpu/drm/i915/i915_cmd_parser.c
> +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c
> @@ -65,10 +65,22 @@ static const struct drm_i915_cmd_descriptor common_cmds[]
> = {
> CMD( MI_STORE_DWORD_INDEX, SMI, !F, 0xFF, R ),
> CMD( MI_LOAD_REGISTER_IMM(1), SMI, !F, 0xFF, W,
> .reg = { .offset = 1, .mask = 0x007FFFFC } ),
> - CMD( MI_STORE_REGISTER_MEM(1), SMI, !F, 0xFF, W,
> - .reg = { .offset = 1, .mask = 0x007FFFFC } ),
> - CMD( MI_LOAD_REGISTER_MEM, SMI, !F, 0xFF, W,
> - .reg = { .offset = 1, .mask = 0x007FFFFC } ),
> + CMD( MI_STORE_REGISTER_MEM(1), SMI, !F, 0xFF, W | B,
> + .reg = { .offset = 1, .mask = 0x007FFFFC },
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0
Not specific to this patch or this field, but all around I think you
should add the comma to the last line too. It's a pretty universal way
of doing things in the kernel, both for array and struct initialization.
> + }},
> + .bits_count = 1 ),
> + CMD( MI_LOAD_REGISTER_MEM, SMI, !F, 0xFF, W | B,
> + .reg = { .offset = 1, .mask = 0x007FFFFC },
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0
> + }},
> + .bits_count = 1 ),
> CMD( MI_BATCH_BUFFER_START, SMI, !F, 0xFF, S ),
> };
>
> @@ -80,9 +92,35 @@ static const struct drm_i915_cmd_descriptor render_cmds[]
> = {
> CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, R ),
> CMD( MI_SET_CONTEXT, SMI, !F, 0xFF, R ),
> CMD( MI_URB_CLEAR, SMI, !F, 0xFF, S ),
> + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3F, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0
> + }},
> + .bits_count = 1 ),
> CMD( MI_UPDATE_GTT, SMI, !F, 0xFF, R ),
> - CMD( MI_CLFLUSH, SMI, !F, 0x3FF, S ),
> - CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ),
> + CMD( MI_CLFLUSH, SMI, !F, 0x3FF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0
> + }},
> + .bits_count = 1 ),
> + CMD( MI_REPORT_PERF_COUNT, SMI, !F, 0x3F, B,
> + .bits = {{
> + .offset = 1,
> + .mask = MI_REPORT_PERF_COUNT_GGTT,
> + .expected = 0
> + }},
> + .bits_count = 1 ),
> + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0
> + }},
> + .bits_count = 1 ),
> CMD( GFX_OP_3DSTATE_VF_STATISTICS, S3D, F, 1, S ),
> CMD( PIPELINE_SELECT, S3D, F, 1, S ),
> CMD( MEDIA_VFE_STATE, S3D, !F, 0xFFFF, B,
> @@ -100,8 +138,15 @@ static const struct drm_i915_cmd_descriptor
> render_cmds[] = {
> .offset = 1,
> .mask = (PIPE_CONTROL_MMIO_WRITE | PIPE_CONTROL_NOTIFY),
> .expected = 0
> + },
> + {
> + .offset = 1,
> + .mask = PIPE_CONTROL_GLOBAL_GTT_IVB,
> + .expected = 0,
> + .condition_offset = 1,
> + .condition_mask = PIPE_CONTROL_POST_SYNC_OP_MASK
> }},
> - .bits_count = 1 ),
> + .bits_count = 2 ),
> };
>
> static const struct drm_i915_cmd_descriptor hsw_render_cmds[] = {
> @@ -127,16 +172,35 @@ static const struct drm_i915_cmd_descriptor
> hsw_render_cmds[] = {
>
> static const struct drm_i915_cmd_descriptor video_cmds[] = {
> CMD( MI_ARB_ON_OFF, SMI, F, 1, R ),
> - CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ),
> + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0
> + }},
> + .bits_count = 1 ),
> CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ),
> CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B,
> .bits = {{
> .offset = 0,
> .mask = MI_FLUSH_DW_NOTIFY,
> .expected = 0
> + },
> + {
> + .offset = 1,
> + .mask = MI_FLUSH_DW_USE_GTT,
> + .expected = 0,
> + .condition_offset = 0,
> + .condition_mask = MI_FLUSH_DW_OP_MASK
> }},
> - .bits_count = 1 ),
> - CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ),
> + .bits_count = 2 ),
> + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0
> + }},
> + .bits_count = 1 ),
> /*
> * MFX_WAIT doesn't fit the way we handle length for most commands.
> * It has a length field but it uses a non-standard length bias.
> @@ -147,29 +211,61 @@ static const struct drm_i915_cmd_descriptor
> video_cmds[] = {
>
> static const struct drm_i915_cmd_descriptor vecs_cmds[] = {
> CMD( MI_ARB_ON_OFF, SMI, F, 1, R ),
> - CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ),
> + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0
> + }},
> + .bits_count = 1 ),
> CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ),
> CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B,
> .bits = {{
> .offset = 0,
> .mask = MI_FLUSH_DW_NOTIFY,
> .expected = 0
> + },
> + {
> + .offset = 1,
> + .mask = MI_FLUSH_DW_USE_GTT,
> + .expected = 0,
> + .condition_offset = 0,
> + .condition_mask = MI_FLUSH_DW_OP_MASK
> }},
> - .bits_count = 1 ),
> - CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ),
> + .bits_count = 2 ),
> + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0
> + }},
> + .bits_count = 1 ),
> };
>
> static const struct drm_i915_cmd_descriptor blt_cmds[] = {
> CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, R ),
> - CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3FF, S ),
> + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3FF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0
> + }},
> + .bits_count = 1 ),
> CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ),
> CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B,
> .bits = {{
> .offset = 0,
> .mask = MI_FLUSH_DW_NOTIFY,
> .expected = 0
> + },
> + {
> + .offset = 1,
> + .mask = MI_FLUSH_DW_USE_GTT,
> + .expected = 0,
> + .condition_offset = 0,
> + .condition_mask = MI_FLUSH_DW_OP_MASK
> }},
> - .bits_count = 1 ),
> + .bits_count = 2 ),
> CMD( COLOR_BLT, S2D, !F, 0x3F, S ),
> CMD( SRC_COPY_BLT, S2D, !F, 0x3F, S ),
> };
> @@ -569,10 +665,21 @@ finish:
>
> int i915_needs_cmd_parser(struct intel_ring_buffer *ring)
> {
> + drm_i915_private_t *dev_priv =
> + (drm_i915_private_t *)ring->dev->dev_private;
> +
> /* No command tables indicates a platform without parsing */
> if (!ring->cmd_tables)
> return 0;
>
> + /*
> + * XXX: VLV is Gen7 and therefore has cmd_tables, but has PPGTT
> + * disabled. That will cause all of the parser's PPGTT checks to
> + * fail. For now, disable parsing when PPGTT is off.
> + */
> + if(!dev_priv->mm.aliasing_ppgtt)
^ missing space.
> + return 0;
> +
Hmm, shouldn't this belong to some other patch, much earlier in the
series? Like patch 2 or 3?
> return i915.enable_cmd_parser;
> }
>
> @@ -675,6 +782,16 @@ int i915_parse_cmds(struct intel_ring_buffer *ring,
> u32 dword = cmd[desc->bits[i].offset] &
> desc->bits[i].mask;
>
> + if (desc->bits[i].condition_mask != 0) {
> + u32 offset =
> + desc->bits[i].condition_offset;
> + u32 condition = cmd[offset] &
> + desc->bits[i].condition_mask;
> +
> + if (condition == 0)
> + continue;
> + }
> +
> if (dword != desc->bits[i].expected) {
> DRM_DEBUG_DRIVER("CMD: Rejected command
> 0x%08X for bitmask 0x%08X (exp=0x%08X act=0x%08X) (ring=%d)\n",
> *cmd,
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 8aed80f..2d1d2ef 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1829,11 +1829,17 @@ struct drm_i915_cmd_descriptor {
> * compared against an expected value. If the command does not match
> * the expected value, the parser rejects it. Only valid if flags has
> * the CMD_DESC_BITMASK bit set.
> + *
> + * If the check specifies a non-zero condition_mask then the parser
> + * only performs the check when the bits specified by condition_mask
> + * are non-zero.
> */
> struct {
> u32 offset;
> u32 mask;
> u32 expected;
> + u32 condition_offset;
> + u32 condition_mask;
> } bits[MAX_CMD_DESC_BITMASKS];
> /** Number of valid entries in the bits array */
> int bits_count;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index c2e4898..ff263f4 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -179,6 +179,8 @@
> * Memory interface instructions used by the kernel
> */
> #define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags))
> +/* Many MI commands use bit 22 of the header dword for GGTT vs PPGTT */
> +#define MI_GLOBAL_GTT (1<<22)
>
> #define MI_NOOP MI_INSTR(0, 0)
> #define MI_USER_INTERRUPT MI_INSTR(0x02, 0)
> @@ -258,6 +260,7 @@
> #define MI_FLUSH_DW_STORE_INDEX (1<<21)
> #define MI_INVALIDATE_TLB (1<<18)
> #define MI_FLUSH_DW_OP_STOREDW (1<<14)
> +#define MI_FLUSH_DW_OP_MASK (3<<14)
> #define MI_FLUSH_DW_NOTIFY (1<<8)
> #define MI_INVALIDATE_BSD (1<<7)
> #define MI_FLUSH_DW_USE_GTT (1<<2)
> @@ -324,6 +327,7 @@
> #define PIPE_CONTROL_CS_STALL (1<<20)
> #define PIPE_CONTROL_TLB_INVALIDATE (1<<18)
> #define PIPE_CONTROL_QW_WRITE (1<<14)
> +#define PIPE_CONTROL_POST_SYNC_OP_MASK (3<<14)
> #define PIPE_CONTROL_DEPTH_STALL (1<<13)
> #define PIPE_CONTROL_WRITE_FLUSH (1<<12)
> #define PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH (1<<12) /* gen6+ */
> @@ -352,6 +356,8 @@
> #define MI_URB_CLEAR MI_INSTR(0x19, 0)
> #define MI_UPDATE_GTT MI_INSTR(0x23, 0)
> #define MI_CLFLUSH MI_INSTR(0x27, 0)
> +#define MI_REPORT_PERF_COUNT MI_INSTR(0x28, 0)
> +#define MI_REPORT_PERF_COUNT_GGTT (1<<0)
> #define MI_LOAD_REGISTER_MEM MI_INSTR(0x29, 0)
> #define MI_LOAD_REGISTER_REG MI_INSTR(0x2A, 0)
> #define MI_RS_STORE_DATA_IMM MI_INSTR(0x2B, 0)
> --
> 1.8.5.2
>
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
