From: Ville Syrjälä <ville.syrj...@linux.intel.com>
In interlaced modes, the pixel counter counts all pixels,
so one field will have htotal more pixels. In order to avoid
the reported position from jumping backwards when the pixel
counter is beyond the length of the shorter field, just
clamp the position the length of the shorter field. This
matches how the scanline counter based position works since
the scanline counter doesn't count the two half lines.
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/i915/i915_irq.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 1b73cf2..9f1c449 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -800,6 +800,18 @@ static int i915_get_crtc_scanoutpos(struct drm_device
*dev, int pipe,
vtotal *= htotal;
/*
+ * In interlaced modes, the pixel counter counts all pixels,
+ * so one field will have htotal more pixels. In order to avoid
+ * the reported position from jumping backwards when the pixel
+ * counter is beyond the length of the shorter field, just
+ * clamp the position the length of the shorter field. This
+ * matches how the scanline counter based position works since
+ * the scanline counter doesn't count the two half lines.
+ */
+ if (position >= vtotal)
+ position = vtotal - 1;
+
+ /*
* Start of vblank interrupt is triggered at start of hsync,
* just prior to the first active line of vblank. However we
* consider lines to start at the leading edge of horizontal
--
1.8.3.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
