On 3/1/2024 2:15 PM, Mitul Golani wrote:
Compute vrr_vsync_start/end, which sets the position
for hardware to send the Vsync at a fixed position
relative to the end of the Vblank.
--v2:
- Updated VSYNC_START/END macros to VRR_VSYNC_START/END. (Ankit)
- Updated bit fields of VRR_VSYNC_START/END. (Ankit)
--v3:
- Add PIPE_CONF_CHECK_I(vrr.vsync_start/end).
- Read/write vrr_vsync params only when we intend to send
adaptive_sync sdp.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.gol...@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 2 ++
.../drm/i915/display/intel_display_types.h | 1 +
drivers/gpu/drm/i915/display/intel_vrr.c | 29 +++++++++++++++++--
drivers/gpu/drm/i915/i915_reg.h | 7 +++++
4 files changed, 37 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c
b/drivers/gpu/drm/i915/display/intel_display.c
index 88158f06bf82..f62c3ae7f0fd 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -5377,6 +5377,8 @@ intel_pipe_config_compare(const struct intel_crtc_state
*current_config,
PIPE_CONF_CHECK_I(vrr.flipline);
PIPE_CONF_CHECK_I(vrr.pipeline_full);
PIPE_CONF_CHECK_I(vrr.guardband);
+ PIPE_CONF_CHECK_I(vrr.vsync_start);
+ PIPE_CONF_CHECK_I(vrr.vsync_end);
}
#undef PIPE_CONF_CHECK_X
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
b/drivers/gpu/drm/i915/display/intel_display_types.h
index 098957cea25b..e8ba3c077569 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1423,6 +1423,7 @@ struct intel_crtc_state {
bool enable, in_range;
u8 pipeline_full;
u16 flipline, vmin, vmax, guardband;
+ u32 vsync_end, vsync_start;
} vrr;
/* Stream Splitter for eDP MSO */
diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c
b/drivers/gpu/drm/i915/display/intel_vrr.c
index 5d905f932cb4..d24a42902e69 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr.c
+++ b/drivers/gpu/drm/i915/display/intel_vrr.c
@@ -9,6 +9,7 @@
#include "intel_de.h"
#include "intel_display_types.h"
#include "intel_vrr.h"
+#include "intel_dp.h"
bool intel_vrr_is_capable(struct intel_connector *connector)
{
@@ -113,6 +114,7 @@ intel_vrr_compute_config(struct intel_crtc_state
*crtc_state,
struct drm_i915_private *i915 = to_i915(crtc->base.dev);
struct intel_connector *connector =
to_intel_connector(conn_state->connector);
+ struct intel_dp *intel_dp = intel_attached_dp(connector);
struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
const struct drm_display_info *info = &connector->base.display_info;
int vmin, vmax;
@@ -165,6 +167,15 @@ intel_vrr_compute_config(struct intel_crtc_state
*crtc_state,
if (crtc_state->uapi.vrr_enabled) {
crtc_state->vrr.enable = true;
crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
+
+ if (intel_dp_as_sdp_supported(intel_dp)) {
+ crtc_state->vrr.vsync_start =
+ (crtc_state->hw.adjusted_mode.crtc_vtotal -
+
VRR_VSYNC_START(crtc_state->hw.adjusted_mode.vsync_start));
+ crtc_state->vrr.vsync_end =
+ (crtc_state->hw.adjusted_mode.crtc_vtotal -
+
(VRR_VSYNC_END(crtc_state->hw.adjusted_mode.vsync_end) >> 16));
I think you are using the VRR_SYNC_START/END macros incorrectly.
We dont need to use these macros here.
+ }
}
}
@@ -203,6 +214,10 @@ void intel_vrr_set_transcoder_timings(const struct intel_crtc_state *crtc_state)
intel_de_write(dev_priv, TRANS_VRR_VMAX(cpu_transcoder),
crtc_state->vrr.vmax - 1);
intel_de_write(dev_priv, TRANS_VRR_CTL(cpu_transcoder),
trans_vrr_ctl(crtc_state));
intel_de_write(dev_priv, TRANS_VRR_FLIPLINE(cpu_transcoder),
crtc_state->vrr.flipline - 1);
+
+ if (crtc_state->vrr.vsync_end && crtc_state->vrr.vsync_start)
+ intel_de_write(dev_priv, TRANS_VRR_VSYNC(cpu_transcoder),
+ crtc_state->vrr.vsync_end << 16 |
crtc_state->vrr.vsync_start);
Here is where the macros should be used.
VRR_SYNC_END(crtc_state->vrr.vsync_end) |
VRR_SYNC_START(crtc_state->vrr.vsync_start);
}
void intel_vrr_send_push(const struct intel_crtc_state *crtc_state)
@@ -263,7 +278,7 @@ void intel_vrr_get_config(struct intel_crtc_state
*crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
- u32 trans_vrr_ctl;
+ u32 trans_vrr_ctl, trans_vrr_vsync;
trans_vrr_ctl = intel_de_read(dev_priv, TRANS_VRR_CTL(cpu_transcoder));
@@ -283,6 +298,16 @@ void intel_vrr_get_config(struct intel_crtc_state *crtc_state)
crtc_state->vrr.vmin = intel_de_read(dev_priv,
TRANS_VRR_VMIN(cpu_transcoder)) + 1;
}
- if (crtc_state->vrr.enable)
+ if (crtc_state->vrr.enable) {
crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
+
+ if (HAS_AS_SDP(dev_priv)) {
+ trans_vrr_vsync =
+ intel_de_read(dev_priv,
TRANS_VRR_VSYNC(cpu_transcoder));
+ crtc_state->vrr.vsync_start =
+ trans_vrr_vsync & VRR_VSYNC_START_MASK;
+ crtc_state->vrr.vsync_end =
+ trans_vrr_vsync & VRR_VSYNC_START_MASK;
Here too you should use REG_FIELD_GET(VRR_VSYNC_START/END_MASK,
trans_vrr_vsync) to fill crtc_state->vrr.sync_start/end.
Regards,
Ankit
+ }
+ }
}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index dce276236707..53d8eb7ea1ea 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2007,7 +2007,9 @@
#define _TRANS_VRR_CTL_B 0x61420
#define _TRANS_VRR_CTL_C 0x62420
#define _TRANS_VRR_CTL_D 0x63420
+#define _TRANS_VRR_VSYNC_A 0x60078
#define TRANS_VRR_CTL(trans) _MMIO_TRANS2(trans,
_TRANS_VRR_CTL_A)
+#define TRANS_VRR_VSYNC(trans) _MMIO_TRANS2(trans,
_TRANS_VRR_VSYNC_A)
#define VRR_CTL_VRR_ENABLE REG_BIT(31)
#define VRR_CTL_IGN_MAX_SHIFT REG_BIT(30)
#define VRR_CTL_FLIP_LINE_EN REG_BIT(29)
@@ -2087,6 +2089,11 @@
#define TRANS_VRR_STATUS2(trans) _MMIO_TRANS2(trans,
_TRANS_VRR_STATUS2_A)
#define VRR_STATUS2_VERT_LN_CNT_MASK REG_GENMASK(19, 0)
+#define VRR_VSYNC_END_MASK REG_GENMASK(28, 16)
+#define VRR_VSYNC_END(vsync_end) REG_FIELD_PREP(VSYNC_END_MASK,
(vsync_end))
+#define VRR_VSYNC_START_MASK REG_GENMASK(12, 0)
+#define VRR_VSYNC_START(vsync_start) REG_FIELD_PREP(VSYNC_START_MASK,
(vsync_start))
+
#define _TRANS_PUSH_A 0x60A70
#define _TRANS_PUSH_B 0x61A70
#define _TRANS_PUSH_C 0x62A70
