On 2024-09-05 at 22:18:17 +0300, Raag Jadav wrote: > On Thu, Sep 05, 2024 at 07:39:31PM +0530, Anshuman Gupta wrote: > > On 2024-09-05 at 11:55:23 +0300, Raag Jadav wrote: > > > On Thu, Sep 05, 2024 at 11:56:15AM +0530, Nilawar, Badal wrote: > > > > > > > > > > > > On 28-08-2024 10:15, Raag Jadav wrote: > > > > > Add hwmon support for temp1_input attribute, which will expose package > > > > > temperature in millidegree Celsius. With this in place we can monitor > > > > > package temperature using lm-sensors tool. > > > > > > > > > > $ sensors > > > > > i915-pci-0300 > > > > > Adapter: PCI adapter > > > > > in0: 990.00 mV > > > > > fan1: 1260 RPM > > > > > temp1: +45.0°C > > > > > power1: N/A (max = 35.00 W) > > > > > energy1: 12.62 kJ > > > > > > > > > > Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11276 > > > > > Signed-off-by: Raag Jadav <[email protected]> > > > > > --- > > > > > .../ABI/testing/sysfs-driver-intel-i915-hwmon | 8 ++++ > > > > > drivers/gpu/drm/i915/i915_hwmon.c | 39 > > > > > +++++++++++++++++++ > > > > > drivers/gpu/drm/i915/intel_mchbar_regs.h | 4 ++ > > > > > 3 files changed, 51 insertions(+) > > > > > > > > > > diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon > > > > > b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon > > > > > index be4141a7522f..a885e5316d02 100644 > > > > > --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon > > > > > +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon > > > > > @@ -83,3 +83,11 @@ Contact: [email protected] > > > > > Description: RO. Fan speed of device in RPM. > > > > > Only supported for particular Intel i915 graphics > > > > > platforms. > > > > > + > > > > > +What: > > > > > /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/temp1_input > > > > > +Date: November 2024 > > > > > +KernelVersion: 6.12 > > > > > +Contact: [email protected] > > > > > +Description: RO. GPU package temperature in millidegree Celsius. > > > > > + > > > > > + Only supported for particular Intel i915 graphics > > > > > platforms. > > > > > diff --git a/drivers/gpu/drm/i915/i915_hwmon.c > > > > > b/drivers/gpu/drm/i915/i915_hwmon.c > > > > > index 17d30f6b84b0..9f1a2300510b 100644 > > > > > --- a/drivers/gpu/drm/i915/i915_hwmon.c > > > > > +++ b/drivers/gpu/drm/i915/i915_hwmon.c > > > > > @@ -7,6 +7,7 @@ > > > > > #include <linux/hwmon-sysfs.h> > > > > > #include <linux/jiffies.h> > > > > > #include <linux/types.h> > > > > > +#include <linux/units.h> > > > > > #include "i915_drv.h" > > > > > #include "i915_hwmon.h" > > > > > @@ -32,6 +33,7 @@ > > > > > struct hwm_reg { > > > > > i915_reg_t gt_perf_status; > > > > > + i915_reg_t pkg_temp; > > > > > i915_reg_t pkg_power_sku_unit; > > > > > i915_reg_t pkg_power_sku; > > > > > i915_reg_t pkg_rapl_limit; > > > > > @@ -280,6 +282,7 @@ static const struct attribute_group *hwm_groups[] > > > > > = { > > > > > }; > > > > > static const struct hwmon_channel_info * const hwm_info[] = { > > > > > + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), > > > > > HWMON_CHANNEL_INFO(in, HWMON_I_INPUT), > > > > > HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | > > > > > HWMON_P_CRIT), > > > > > HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT), > > > > > @@ -310,6 +313,36 @@ static int hwm_pcode_write_i1(struct > > > > > drm_i915_private *i915, u32 uval) > > > > > POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, > > > > > uval); > > > > > } > > > > > +static umode_t > > > > > +hwm_temp_is_visible(const struct hwm_drvdata *ddat, u32 attr) > > > > > +{ > > > > > + struct i915_hwmon *hwmon = ddat->hwmon; > > > > > + > > > > > + if (attr == hwmon_temp_input && > > > > > i915_mmio_reg_valid(hwmon->rg.pkg_temp)) > > > > > + return 0444; > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static int > > > > > +hwm_temp_read(struct hwm_drvdata *ddat, u32 attr, long *val) > > > > > +{ > > > > > + struct i915_hwmon *hwmon = ddat->hwmon; > > > > > + intel_wakeref_t wakeref; > > > > > + u32 reg_val; > > > > > + > > > > > + if (attr == hwmon_temp_input) { > > > > > + with_intel_runtime_pm(ddat->uncore->rpm, wakeref) > > > > > + reg_val = intel_uncore_read(ddat->uncore, > > > > > hwmon->rg.pkg_temp); > > > > > + > > > > > + /* HW register value is in degrees, convert to > > > > > millidegrees. */ > > > > > + *val = REG_FIELD_GET(TEMP_MASK, reg_val) * > > > > > MILLIDEGREE_PER_DEGREE; > > > > > + return 0; > > > > > + } > > > > > + > > > > > + return -EOPNOTSUPP; > > > > > +} > > > > Let's try to have synergy between previous attribute, such as > > > > hwm_fan_input, > > > > and this one. > > > > > > This one's simple enough to be inline IMHO. > > > Besides, it's already in synergy with hwm_in_read() which has similar > > > implementation. > > Agree this is pretty simple to have an any helper but IMO it would have > > been cleaner to have a switch > > like hwm_in_read() to return -EOPNOTSUPP in default case. i think that was > > reason switch case was > > used in entire file. > > Extending on the simplicity argument above, if() makes more sense for a > single case. IMO lets prefer the style which was used in this entire file, that is more readable along with other attributes. Idea behind switch was scalable attribute for future. It is something related to individual preference therefore let's prefer the symmetry with other hwmon attributes.
With that Reviewed-by: Anshuman Gupta <[email protected]> > > Raag
