> -----Original Message-----
> From: Kandpal, Suraj <[email protected]>
> Sent: Tuesday, October 15, 2024 2:33 PM
> To: Garg, Nemesa <[email protected]>; [email protected]
> Cc: Garg, Nemesa <[email protected]>
> Subject: RE: [PATCH] drm/i915/display: Workaround for odd panning for planar
> yuv
>
>
>
> > -----Original Message-----
> > From: Intel-gfx <[email protected]> On Behalf Of
> > Nemesa Garg
> > Sent: Monday, September 30, 2024 4:54 PM
> > To: [email protected]
> > Cc: Garg, Nemesa <[email protected]>
> > Subject: [PATCH] drm/i915/display: Workaround for odd panning for
> > planar yuv
> >
> > Disable the support for odd x pan for even xsize for NV12 format as
> > underrun issue is seen.
> >
> > WA: 16024459452
> >
> > v2: Replace HSD with WA in commit message [Suraj]
> > Modified the condition for handling odd panning
> >
> > v3: Simplified the condition for checking hsub
> > Using older framework for wa as rev1[Jani]
> >
> > v4: Modify the condition for hsub [Sai Teja]
> > Initialize hsub in else path [Dan]
> >
> > v5: Replace IS_LUNARLAKE with display version.
> > Resolve nitpicks[Jani]
> >
> > Signed-off-by: Nemesa Garg <[email protected]>
> > ---
> > drivers/gpu/drm/i915/display/intel_atomic_plane.c | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> > b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> > index e979786aa5cf..e3401a4f7992 100644
> > --- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> > +++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> > @@ -1029,6 +1029,14 @@ int intel_plane_check_src_coordinates(struct
> > intel_plane_state *plane_state)
> > * This allows NV12 and P0xx formats to have odd size and/or
> odd
> > * source coordinates on DISPLAY_VER(i915) >= 20
> > */
> > + /*
> > + * Wa_16023981245 for display version 20.
> > + * Do not support odd x-panning for even xsize for NV12.
>
> Only mention WA no here the rest anyone can refer to by going and checking the
> HSD
Sure..will do.
>
> > + */
> > + if (DISPLAY_VER(i915) == 20 && fb->format->format ==
> > DRM_FORMAT_NV12 &&
> > + src_x % 2 != 0 && src_w % 2 == 0)
> > + return -EINVAL;
>
> Also rather than return -EINVAL here we set hsub =2 and vsub =1 this should
> make sure odd panning is disabled When we have even size since we only need to
> disable odd panning according to hsd not even panning this return may end stop
> panning for even sizes all together.
>
Even if I do hsub=2 then also it will return -EINVAL as src_x will be odd and
src_x % hsub will be 1 which will return -EINVAL.
Even panning doesn't get disable that's why I have added the check src_x % 2 !=
0 to make sure that position in not even
and src_w % 2 to check for even size.
Regards,
Nemesa
> Regards,
> Suraj Kandpal
> > +
> > hsub = 1;
> > vsub = 1;
> > } else {
> > --
> > 2.25.1
