On 1/8/2025 6:05 PM, Mitul Golani wrote:
Check if vblank is sufficient for dsc prefill latency.
--v2:
- Consider chroma downscaling factor in latency calculation. [Ankit]
- Replace with appropriate function name.
--v3:
- Remove FIXME tag.[Ankit]
- Replace Ycbcr444 to Ycbcr420.[Anit]
- Correct precision. [Ankit]
- Use some local valiables like linetime_factor and latency to
adjust precision.
- Declare latency to 0 initially to avoid returning any garbage values.
- Account for second scaler downscaling factor as well. [Ankit]
Signed-off-by: Mitul Golani <[email protected]>
---
drivers/gpu/drm/i915/display/skl_watermark.c | 37 ++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c
b/drivers/gpu/drm/i915/display/skl_watermark.c
index fe91854e456c..d275ec687748 100644
--- a/drivers/gpu/drm/i915/display/skl_watermark.c
+++ b/drivers/gpu/drm/i915/display/skl_watermark.c
@@ -2292,6 +2292,42 @@ static int icl_build_plane_wm(struct intel_crtc_state
*crtc_state,
return 0;
}
+static int
+dsc_prefill_latency(const struct intel_crtc_state *crtc_state)
+{
+ const struct intel_crtc_scaler_state *scaler_state =
+ &crtc_state->scaler_state;
+ int latency = 0;
+ int count = hweight32(scaler_state->scaler_users);
+ long long hscale_k[2] = {1, 1};
+ long long vscale_k[2] = {1, 1};
+
+ if (!crtc_state->dsc.compression_enable)
+ return latency;
+
+ for (int i = 0; i < count; i++) {
+ hscale_k[i] = mul_u32_u32(scaler_state->scalers[i].hscale, 1000)
>> 16;
+ vscale_k[i] = mul_u32_u32(scaler_state->scalers[i].vscale, 1000)
>> 16;
+ }
+
+ if (count) {
+ int chroma_downscaling_factor =
+ crtc_state->output_format ==
INTEL_OUTPUT_FORMAT_YCBCR420 ? 2 : 1;
+ long long total_scaling_factor;
+ int linetime_factor = DIV_ROUND_UP(15 * crtc_state->linetime,
10);
+
+ total_scaling_factor = DIV_ROUND_UP_ULL(hscale_k[0] *
vscale_k[0], 1000000);
I think this might end up being 0.
Consider hscale and vscale to be 0.5 each. hscale_k and vscale_k will be
500 each.
total_scaling_factor will become 500*500/ 10,00,000 or 2,50,000
/10,00,000 = 0.
I think you should compute latency for scaler 0 and then if there is
another scaler, multiply it with the total scaling factor for scaler 1.
Regards,
Ankit
+
+ if (count > 1)
+ total_scaling_factor *= DIV_ROUND_UP_ULL(hscale_k[1] *
vscale_k[1],
+ 1000000);
+
+ latency = total_scaling_factor * linetime_factor *
chroma_downscaling_factor;
+ }
+
+ return latency;
+}
+
static int
scaler_prefill_latency(const struct intel_crtc_state *crtc_state)
{
@@ -2333,6 +2369,7 @@ skl_is_vblank_too_short(const struct intel_crtc_state
*crtc_state,
return crtc_state->framestart_delay +
intel_usecs_to_scanlines(adjusted_mode, latency) +
scaler_prefill_latency(crtc_state) +
+ dsc_prefill_latency(crtc_state) +
wm0_lines >
adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vblank_start;
}
