[PATCH 11/14] drm/i915/dp: Use int for compressed BPP in dsc_compute_link_config()

[Jani Nikula]

Just use ints unless there are actual reasons to do otherwise. Here,
there are not.

Signed-off-by: Jani Nikula <jani.nik...@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c 
b/drivers/gpu/drm/i915/display/intel_dp.c
index 7a8a4df1bf1e..7c6d277729d0 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1926,7 +1926,7 @@ static bool intel_dp_dsc_supports_format(const struct 
intel_connector *connector
        return drm_dp_dsc_sink_supports_format(connector->dp.dsc_dpcd, 
sink_dsc_format);
 }
 
-static bool is_bw_sufficient_for_dsc_config(u16 compressed_bppx16, u32 
link_clock,
+static bool is_bw_sufficient_for_dsc_config(int dsc_bpp_x16, u32 link_clock,
                                            u32 lane_count, u32 mode_clock,
                                            enum intel_output_format 
output_format,
                                            int timeslots)
@@ -1934,7 +1934,7 @@ static bool is_bw_sufficient_for_dsc_config(u16 
compressed_bppx16, u32 link_cloc
        u32 available_bw, required_bw;
 
        available_bw = (link_clock * lane_count * timeslots * 16)  / 8;
-       required_bw = compressed_bppx16 * 
(intel_dp_mode_to_fec_clock(mode_clock));
+       required_bw = dsc_bpp_x16 * (intel_dp_mode_to_fec_clock(mode_clock));
 
        return available_bw > required_bw;
 }
@@ -1942,7 +1942,7 @@ static bool is_bw_sufficient_for_dsc_config(u16 
compressed_bppx16, u32 link_cloc
 static int dsc_compute_link_config(struct intel_dp *intel_dp,
                                   struct intel_crtc_state *pipe_config,
                                   const struct link_config_limits *limits,
-                                  u16 compressed_bppx16,
+                                  int dsc_bpp_x16,
                                   int timeslots)
 {
        const struct drm_display_mode *adjusted_mode = 
&pipe_config->hw.adjusted_mode;
@@ -1957,7 +1957,7 @@ static int dsc_compute_link_config(struct intel_dp 
*intel_dp,
                for (lane_count = limits->min_lane_count;
                     lane_count <= limits->max_lane_count;
                     lane_count <<= 1) {
-                       if (!is_bw_sufficient_for_dsc_config(compressed_bppx16, 
link_rate,
+                       if (!is_bw_sufficient_for_dsc_config(dsc_bpp_x16, 
link_rate,
                                                             lane_count, 
adjusted_mode->clock,
                                                             
pipe_config->output_format,
                                                             timeslots))
-- 
2.39.5