On 6/4/2025 1:05 AM, Mitul Golani wrote:
Add VRR register offsets and bits to access DC Balance configuration.
--v2:
- Separate register definitions. (Ankit)
- Remove usage of dev_priv. (Jani, Nikula)
--v3:
- Convert register address offset, from capital to small. (Ankit)
- Move mask bits near to register offsets. (Ankit)
--v4:
- Use _MMIO_TRANS wherever possible. (Jani)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.gol...@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nauti...@intel.com>
---
drivers/gpu/drm/i915/display/intel_vrr_regs.h | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_vrr_regs.h
b/drivers/gpu/drm/i915/display/intel_vrr_regs.h
index 09cdd50d6187..b90dad473d8d 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_vrr_regs.h
@@ -9,6 +9,49 @@
#include "intel_display_reg_defs.h"
/* VRR registers */
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A 0x604d4
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B 0x614d4
+#define TRANS_VRR_DCB_ADJ_FLIPLINE_CFG(trans) _MMIO_TRANS(trans, \
+
_TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A, \
+
_TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B)
+#define VRR_DCB_ADJ_FLIPLINE_CNT_MASK REG_GENMASK(31, 24)
+#define VRR_DCB_ADJ_FLIPLINE_MASK REG_GENMASK(19, 0)
+#define VRR_DCB_ADJ_FLIPLINE(flipline)
REG_FIELD_PREP(VRR_DCB_ADJ_FLIPLINE_MASK, \
+ (flipline))
+
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_A 0x604d8
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_B 0x614d8
+#define TRANS_VRR_DCB_ADJ_VMAX_CFG(trans) _MMIO_TRANS(trans, \
+
_TRANS_VRR_DCB_ADJ_VMAX_CFG_A, \
+
_TRANS_VRR_DCB_ADJ_VMAX_CFG_B)
+#define VRR_DCB_ADJ_VMAX_CNT_MASK REG_GENMASK(31, 24)
+#define VRR_DCB_ADJ_VMAX_MASK REG_GENMASK(19, 0)
+#define VRR_DCB_ADJ_VMAX(vmax)
REG_FIELD_PREP(VRR_DCB_ADJ_VMAX_MASK, (vmax))
+
+#define _TRANS_VRR_DCB_FLIPLINE_A 0x60418
+#define _TRANS_VRR_DCB_FLIPLINE_B 0x61418
+#define TRANS_VRR_DCB_FLIPLINE(trans) _MMIO_TRANS(trans, \
+
_TRANS_VRR_DCB_FLIPLINE_A, \
+
_TRANS_VRR_DCB_FLIPLINE_B)
+#define VRR_DCB_FLIPLINE_MASK REG_GENMASK(19, 0)
+#define VRR_DCB_FLIPLINE(flipline)
REG_FIELD_PREP(VRR_DCB_FLIPLINE_MASK, \
+ (flipline))
+
+#define _TRANS_VRR_DCB_VMAX_A 0x60414
+#define _TRANS_VRR_DCB_VMAX_B 0x61414
+#define TRANS_VRR_DCB_VMAX(trans) _MMIO_TRANS(trans, \
+
_TRANS_VRR_DCB_VMAX_A, \
+
_TRANS_VRR_DCB_VMAX_B)
+#define VRR_DCB_VMAX_MASK REG_GENMASK(19, 0)
+#define VRR_DCB_VMAX(vmax)
REG_FIELD_PREP(VRR_DCB_VMAX_MASK, (vmax))
+
+#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_A 0x604c0
+#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_B 0x614c0
+#define TRANS_ADAPTIVE_SYNC_DCB_CTL(trans) _MMIO_TRANS(trans, \
+
_TRANS_ADAPTIVE_SYNC_DCB_CTL_A, \
+
_TRANS_ADAPTIVE_SYNC_DCB_CTL_B)
+#define ADAPTIVE_SYNC_COUNTER_EN REG_BIT(31)
+
#define _TRANS_VRR_CTL_A 0x60420
#define _TRANS_VRR_CTL_B 0x61420
#define _TRANS_VRR_CTL_C 0x62420
@@ -20,6 +63,7 @@
#define VRR_CTL_PIPELINE_FULL_MASK REG_GENMASK(10, 3)
#define VRR_CTL_PIPELINE_FULL(x)
REG_FIELD_PREP(VRR_CTL_PIPELINE_FULL_MASK, (x))
#define VRR_CTL_PIPELINE_FULL_OVERRIDE REG_BIT(0)
+#define VRR_CTL_DCB_ADJ_ENABLE REG_BIT(28)
#define XELPD_VRR_CTL_VRR_GUARDBAND_MASK REG_GENMASK(15, 0)
#define XELPD_VRR_CTL_VRR_GUARDBAND(x)
REG_FIELD_PREP(XELPD_VRR_CTL_VRR_GUARDBAND_MASK, (x))
