On Wed, 03 Dec 2025, Imre Deak <[email protected]> wrote:
> On Wed, Dec 03, 2025 at 10:13:44AM +0200, Jani Nikula wrote:
>> On Tue, 02 Dec 2025, Imre Deak <[email protected]> wrote:
>> > On Tue, Dec 02, 2025 at 11:24:42PM +0200, Imre Deak wrote:
>> >> On Tue, Dec 02, 2025 at 08:39:50PM +0200, Jani Nikula wrote:
>> >> > intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been
>> >> > initialized, and dmc is thus NULL.
>> >> >
>> >> > That would be the case when the call path is
>> >> > intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() ->
>> >> > gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as
>> >> > intel_power_domains_init_hw() is called *before* intel_dmc_init().
>> >> >
>> >> > However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count()
>> >> > conditionally, depending on the current and target DC states. At probe,
>> >> > the target is disabled, but if DC6 is enabled, the function is called,
>> >> > and an oops follows. Apparently it's quite unlikely that DC6 is enabled
>> >> > at probe, as we haven't seen this failure mode before.
>> >> >
>> >> > Add NULL checks and switch the dmc->display references to just display.
>> >> >
>> >> > Fixes: 88c1f9a4d36d ("drm/i915/dmc: Create debugfs entry for dc6
>> >> > counter")
>> >> > Cc: Mohammed Thasleem <[email protected]>
>> >> > Cc: Imre Deak <[email protected]>
>> >> > Cc: <[email protected]> # v6.16+
>> >> > Signed-off-by: Jani Nikula <[email protected]>
>> >> >
>> >> > ---
>> >> >
>> >> > Rare case, but this may also throw off the rc6 counting in debugfs when
>> >> > it does happen.
>> >>
>> >> Yes, I missed the case where the driver is being loaded while DC6 is
>> >> enabled, this is what happens for the reporter:
>> >>
>> >> i915 0000:00:04.0: [drm] *ERROR* DC state mismatch (0x0 -> 0x2)
>> >>
>> >> That's odd, as DC6 requires the DMC firmware, which - if it's indeed
>> >> loaded by BIOS for instance - will be overwritten by the driver, not a
>> >> well specified sequence (even though the driver is trying to handle it
>> >> correctly by disabling any active firmware handler).
>> >>
>> >> But as you pointed out this would also throw off the cooked-up DC6
>> >> counter tracking,
>> >
>> > Actually the patch would keep the counter working, as the counter
>> > wouldn't be updated in the dmc==NULL case. However I still think the
>> > correct fix would be to check the correct DC state, which from the POV
>> > of the counter tracking is the driver's version of the state, not the HW
>> > state.
>>
>> One thing I failed to mention is that this happens in a KASAN run in
>> QEMU. So I'm kind of not surprised we haven't hit this before. And it
>> impacts the deductions about the DC state.
>
> Ok, it's strange why QEMU decides to initialize the DC_STATE_EN register
> to a non-zero value then. But in any case the driver should handle it.
>
>> I'm not quite sure what exactly you're suggesting, maybe a draft patch
>> would communicate the idea better than plain English? ;)
>
> intel_dmc_get_dc6_allowed_count() still needs to check for dmc==NULL, as
> the debugfs entry can be read at any point. With that, what I meant is:
>
> in gen9_set_dc_state():
> ...
> - dc6_was_enabled = val & DC_STATE_EN_UPTO_DC6;
> + dc6_was_enabled = power_domains->dc_state & DC_STATE_EN_UPTO_DC6;
I still don't understand why we can trust our own value rather than
what's in the hardware in this case.
For resume, we even call gen9_sanitize_dc_state(), but not for probe.
> ...
>
> in intel_dmc_get_dc6_allowed_count():
> ...
> if (DISPLAY_VER(display) < 14)
> return false;
>
> + if (!dmc) {
> + *count = 0;
> + return true;
> + }
> +
This seems neat but is overkill. dmc is never NULL here, but I added the
check for completeness.
It's the intel_dmc_update_dc6_allowed_count() that's more fragile, and I
want that to have the !dmc check, instead of relying on the subtle
dependency on power_domains->dc_state.
> mutex_lock(&power_domains->lock);
> - dc6_enabled = intel_de_read(display, DC_STATE_EN) &
> - DC_STATE_EN_UPTO_DC6;
> + dc6_enabled = power_domains->dc_state & DC_STATE_EN_UPTO_DC6;
> ...
>
>> Anyway, I think "not oopsing" is a lot better than "inaccurate DC
>> counters in debugfs".
>
> Agreed, the above would ensure both.
>
>>
>> BR,
>> Jani.
>>
>>
>> >
>> >> so could instead the counter update depend on the
>> >> driver's DC state instead of the HW state? I.e. set
>> >> gen9_set_dc_state()/dc6_was_enabled,
>> >> intel_dmc_get_dc6_allowed_count()/dc6_enable if power_domains->dc_state
>> >> says that DC6 was indeed enabled by the driver (instead of checking the
>> >> HW state).
>> >>
>> >> That would fix the reporter's oops when calling
>> >> intel_dmc_update_dc6_allowed_count(start_tracking=false), by not calling
>> >> it if the driver hasn't actually enabled DC6 and it would also keep the
>> >> DC6 counter tracking correct.
>> >>
>> >> intel_dmc_update_dc6_allowed_count(start_tracking=true) would be also
>> >> guaranteed to be called only once the firmware is loaded, as until that
>> >> point enabling DC6 is blocked (by holding a reference on the DC_off
>> >> power well).
>> >>
>> >> > ---
>> >> > drivers/gpu/drm/i915/display/intel_dmc.c | 6 +++---
>> >> > 1 file changed, 3 insertions(+), 3 deletions(-)
>> >> >
>> >> > diff --git a/drivers/gpu/drm/i915/display/intel_dmc.c
>> >> > b/drivers/gpu/drm/i915/display/intel_dmc.c
>> >> > index 2fb6fec6dc99..169bbbc91f6d 100644
>> >> > --- a/drivers/gpu/drm/i915/display/intel_dmc.c
>> >> > +++ b/drivers/gpu/drm/i915/display/intel_dmc.c
>> >> > @@ -1570,10 +1570,10 @@ void intel_dmc_update_dc6_allowed_count(struct
>> >> > intel_display *display,
>> >> > struct intel_dmc *dmc = display_to_dmc(display);
>> >> > u32 dc5_cur_count;
>> >> >
>> >> > - if (DISPLAY_VER(dmc->display) < 14)
>> >> > + if (!dmc || DISPLAY_VER(display) < 14)
>> >> > return;
>> >> >
>> >> > - dc5_cur_count = intel_de_read(dmc->display,
>> >> > DG1_DMC_DEBUG_DC5_COUNT);
>> >> > + dc5_cur_count = intel_de_read(display, DG1_DMC_DEBUG_DC5_COUNT);
>> >> >
>> >> > if (!start_tracking)
>> >> > dmc->dc6_allowed.count += dc5_cur_count -
>> >> > dmc->dc6_allowed.dc5_start;
>> >> > @@ -1587,7 +1587,7 @@ static bool
>> >> > intel_dmc_get_dc6_allowed_count(struct intel_display *display, u32 *
>> >> > struct intel_dmc *dmc = display_to_dmc(display);
>> >> > bool dc6_enabled;
>> >> >
>> >> > - if (DISPLAY_VER(display) < 14)
>> >> > + if (!dmc || DISPLAY_VER(display) < 14)
>> >> > return false;
>> >> >
>> >> > mutex_lock(&power_domains->lock);
>> >> > --
>> >> > 2.47.3
>> >> >
>>
>> --
>> Jani Nikula, Intel
--
Jani Nikula, Intel
