With this all hw writes are also gone from the ->crtc_mode_set hook on vlv. I wondered whether we should track more of the pll state in the pipe config, but otoh as long as we don't have shared plls that's not really useful - the cross-checking of the port clock should be sufficient.
While at it also de-magic some of the pipe checks, this has been irking me since a long time. Whit this vlv is now ready for runtime PM on dpms. If we'd have runtime PM support in general ... Signed-off-by: Daniel Vetter <[email protected]> --- drivers/gpu/drm/i915/intel_display.c | 53 ++++++++++++++++++++---------------- 1 file changed, 30 insertions(+), 23 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 057f4d6a3e1f..21e20bc495ee 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -63,6 +63,7 @@ static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc, static void ironlake_set_pipeconf(struct drm_crtc *crtc); static void haswell_set_pipeconf(struct drm_crtc *crtc); static void intel_set_pipe_csc(struct drm_crtc *crtc); +static void vlv_prepare_pll(struct intel_crtc *crtc); typedef struct { int min, max; @@ -4370,6 +4371,8 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc) if (intel_crtc->active) return; + vlv_prepare_pll(intel_crtc); + /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; @@ -5220,12 +5223,34 @@ static void intel_dp_set_m_n(struct intel_crtc *crtc) static void vlv_update_pll(struct intel_crtc *crtc) { + u32 dpll, dpll_md; + + /* + * Enable DPIO clock input. We should never disable the reference + * clock for pipe B, since VGA hotplug / manual detection depends + * on it. + */ + dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV | + DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV; + /* We should never disable this, set it here for state tracking */ + if (crtc->pipe == PIPE_B) + dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; + dpll |= DPLL_VCO_ENABLE; + crtc->config.dpll_hw_state.dpll = dpll; + + dpll_md = (crtc->config.pixel_multiplier - 1) + << DPLL_MD_UDI_MULTIPLIER_SHIFT; + crtc->config.dpll_hw_state.dpll_md = dpll_md; +} + +static void vlv_prepare_pll(struct intel_crtc *crtc) +{ struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; int pipe = crtc->pipe; - u32 dpll, mdiv; + u32 mdiv; u32 bestn, bestm1, bestm2, bestp1, bestp2; - u32 coreclk, reg_val, dpll_md; + u32 coreclk, reg_val; mutex_lock(&dev_priv->dpio_lock); @@ -5238,7 +5263,7 @@ static void vlv_update_pll(struct intel_crtc *crtc) /* See eDP HDMI DPIO driver vbios notes doc */ /* PLL B needs special handling */ - if (pipe) + if (pipe == PIPE_B) vlv_pllb_recal_opamp(dev_priv, pipe); /* Set up Tx target for periodic Rcomp update */ @@ -5282,7 +5307,7 @@ static void vlv_update_pll(struct intel_crtc *crtc) if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) || intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) { /* Use SSC source */ - if (!pipe) + if (pipe == PIPE_A) vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), 0x0df40000); else @@ -5290,7 +5315,7 @@ static void vlv_update_pll(struct intel_crtc *crtc) 0x0df70000); } else { /* HDMI or VGA */ /* Use bend source */ - if (!pipe) + if (pipe == PIPE_A) vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), 0x0df70000); else @@ -5306,24 +5331,6 @@ static void vlv_update_pll(struct intel_crtc *crtc) vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk); vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000); - - /* - * Enable DPIO clock input. We should never disable the reference - * clock for pipe B, since VGA hotplug / manual detection depends - * on it. - */ - dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV | - DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV; - /* We should never disable this, set it here for state tracking */ - if (pipe == PIPE_B) - dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; - dpll |= DPLL_VCO_ENABLE; - crtc->config.dpll_hw_state.dpll = dpll; - - dpll_md = (crtc->config.pixel_multiplier - 1) - << DPLL_MD_UDI_MULTIPLIER_SHIFT; - crtc->config.dpll_hw_state.dpll_md = dpll_md; - mutex_unlock(&dev_priv->dpio_lock); } -- 1.8.1.4 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
