From: Imre Deak <[email protected]>
The device service IRQ handling was added to the connector detect
function by
commit 09b1eb130e43 ("drm/i915: Move Displayport test request and sink
IRQ logic to intel_dp_detect()")
since some Automated Test Request IRQs couldn't be handled in the short
HPD IRQ handler context. This has been fixed meanwhile by deferring the
handling of all test request events from the IRQ handler to the hotplug
handler (intel_dp_short_pulse() -> intel_dp_test_short_pulse() ->
reprobe) and by handling all hotplug events (both for short and long HPD
pulses) in the test application.
Handling device IRQs during connector detection is not standard
compliant (the IRQs should be handled when an HPD IRQ is raised) and it
happens in a racy way with the same device IRQ handling happening from
the HPD IRQ handler (since the detect and HPD IRQ handler can run in
parallel).
Based on the above, remove the redundant call from the detect function.
Signed-off-by: Imre Deak <[email protected]>
---
drivers/gpu/drm/i915/display/intel_dp.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
b/drivers/gpu/drm/i915/display/intel_dp.c
index a49e30e3edd16..30b2aa3f5f5b5 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -6324,8 +6324,6 @@ intel_dp_detect(struct drm_connector *_connector,
if (intel_dp_is_edp(intel_dp) || connector->detect_edid)
status = connector_status_connected;
- intel_dp_check_device_service_irq(intel_dp);
-
out_unset_edid:
if (status != connector_status_connected && !intel_dp->is_mst)
intel_dp_unset_edid(intel_dp);
--
2.49.1
