Hi Deepak,
deepa...@linux.intel.com writes:
> From: Deepak S <deepa...@linux.intel.com>
>
> v2: Configure PCBR if BIOS fails allocate pcbr (deepak)
>
> v3: Fix PCBR condition check during CHV RC6 Enable flag set
>
> v4: Fixup PCBR comment msg. (Chris)
> Rebase against latest code (Deak)
> Fixup Spurious hunk (Ben)
>
> Signed-off-by: Deepak S <deepa...@linux.intel.com>
> Acked-by: Ben Widawsky <b...@bwidawsk.net>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 2 +
> drivers/gpu/drm/i915/intel_pm.c | 115
> +++++++++++++++++++++++++++++++++++++---
> 2 files changed, 111 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index c850254..b4074fd 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -962,6 +962,8 @@ enum punit_power_well {
> #define VLV_IMR (VLV_DISPLAY_BASE + 0x20a8)
> #define VLV_ISR (VLV_DISPLAY_BASE + 0x20ac)
> #define VLV_PCBR (VLV_DISPLAY_BASE + 0x2120)
> +#define VLV_PCBR_ADDR_SHIFT 12
> +
> #define DISPLAY_PLANE_FLIP_PENDING(plane) (1<<(11-(plane))) /* A and B
> only */
> #define EIR 0x020b0
> #define EMR 0x020b4
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index ebb5c88..f0359b6 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3300,6 +3300,13 @@ static void gen6_disable_rps(struct drm_device *dev)
> gen6_disable_rps_interrupts(dev);
> }
>
> +static void cherryview_disable_rps(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> +
> + I915_WRITE(GEN6_RC_CONTROL, 0);
> +}
> +
> static void valleyview_disable_rps(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -3722,6 +3729,33 @@ static void valleyview_check_pctx(struct
> drm_i915_private *dev_priv)
> dev_priv->vlv_pctx->stolen->start);
> }
>
> +
> +/* Check that the pcbr address is not empty. */
> +static void cherryview_check_pctx(struct drm_i915_private *dev_priv)
> +{
> + unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095;
> +
> + WARN_ON((pctx_addr >> VLV_PCBR_ADDR_SHIFT) == 0);
> +}
> +
> +static void cherryview_setup_pctx(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + unsigned long pctx_paddr;
> + struct i915_gtt *gtt = &dev_priv->gtt;
> + u32 pcbr;
> + int pctx_size = 32*1024;
> +
> + WARN_ON(!mutex_is_locked(&dev->struct_mutex));
> +
> + pcbr = I915_READ(VLV_PCBR);
> + if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) {
I admit that address zero locked by bios is prolly in
realms of paranoia. But I would still omit shift here to
get lock bit taken into consideration.
> + pctx_paddr = (dev_priv->mm.stolen_base +
> + (gtt->stolen_size - pctx_size));
> + I915_WRITE(VLV_PCBR, pctx_paddr);
In here tho I would mask the low bits out, just to be on
the safe side. If we get off by one on stolen calculation we end up
writing the lock bit.
I am thinking that we should just sanity check that bios
has set this up and that it seems to be in correct place. If not, spit a
warning and leave rc6 disabled.
The BIOS should have setup everything for us. Why do we need this
PCBR setup?
> + }
> +}
> +
> static void valleyview_setup_pctx(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -3811,11 +3845,72 @@ static void valleyview_init_gt_powersave(struct
> drm_device *dev)
> mutex_unlock(&dev_priv->rps.hw_lock);
> }
>
> +static void cherryview_init_gt_powersave(struct drm_device *dev)
> +{
> + cherryview_setup_pctx(dev);
> +}
> +
> static void valleyview_cleanup_gt_powersave(struct drm_device *dev)
> {
> valleyview_cleanup_pctx(dev);
> }
>
> +static void cherryview_enable_rps(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_ring_buffer *ring;
> + u32 gtfifodbg, rc6_mode = 0, pcbr;
> + int i;
> +
> + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
> +
> + gtfifodbg = I915_READ(GTFIFODBG);
> + if (gtfifodbg) {
> + DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
> + gtfifodbg);
> + I915_WRITE(GTFIFODBG, gtfifodbg);
> + }
> +
> + cherryview_check_pctx(dev_priv);
> +
> + /* 1a & 1b: Get forcewake during program sequence. Although the driver
> + * hasn't enabled a state yet where we need forcewake, BIOS may have.*/
> + gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
> +
I915_WRITE(GEN6_RC_CONTROL, 0);
> + /* 2a: Program RC6 thresholds.*/
> + I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
> + I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
> + I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
> +
> + for_each_ring(ring, dev_priv, i)
> + I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
> +
I915_WRITE(GEN6_RC_SLEEP, 0);
missing?
> + I915_WRITE(GEN6_RC6_THRESHOLD, 50000); /* 50/125ms per EI */
> +
> + /* allows RC6 residency counter to work */
> + I915_WRITE(VLV_COUNTER_CONTROL,
> + _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
> + VLV_MEDIA_RC6_COUNT_EN |
> + VLV_RENDER_RC6_COUNT_EN));
> +
> + /* Todo: If BIOS has not configured PCBR
> + * then allocate in BIOS Reserved */
> +
> + /* For now we assume BIOS is allocating and populating the PCBR
> */
Both comments do not match with the code.
> + pcbr = I915_READ(VLV_PCBR);
> +
> + DRM_DEBUG_DRIVER("PCBR offset : 0x%x\n", pcbr);
> +
> + /* 3: Enable RC6 */
> + if ((intel_enable_rc6(dev) & INTEL_RC6_ENABLE) &&
> + (pcbr >> VLV_PCBR_ADDR_SHIFT))
> + rc6_mode = GEN6_RC_CTL_EI_MODE(1) | VLV_RC_CTL_CTX_RST_PARALLEL;
^^
Bit 24 is not used with chv.
-Mika
> +
> + I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
> +
> + gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
> +}
> +
> static void valleyview_enable_rps(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -4624,13 +4719,17 @@ void intel_init_gt_powersave(struct drm_device *dev)
> {
> i915.enable_rc6 = sanitize_rc6_option(dev, i915.enable_rc6);
>
> - if (IS_VALLEYVIEW(dev))
> + if (IS_CHERRYVIEW(dev))
> + cherryview_init_gt_powersave(dev);
> + else if (IS_VALLEYVIEW(dev))
> valleyview_init_gt_powersave(dev);
> }
>
> void intel_cleanup_gt_powersave(struct drm_device *dev)
> {
> - if (IS_VALLEYVIEW(dev))
> + if (IS_CHERRYVIEW(dev))
> + return;
> + else if (IS_VALLEYVIEW(dev))
> valleyview_cleanup_gt_powersave(dev);
> }
>
> @@ -4644,11 +4743,13 @@ void intel_disable_gt_powersave(struct drm_device
> *dev)
> if (IS_IRONLAKE_M(dev)) {
> ironlake_disable_drps(dev);
> ironlake_disable_rc6(dev);
> - } else if (IS_GEN6(dev) || IS_GEN7(dev)) {
> + } else if (INTEL_INFO(dev)->gen >= 6) {
> cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
> cancel_work_sync(&dev_priv->rps.work);
> mutex_lock(&dev_priv->rps.hw_lock);
> - if (IS_VALLEYVIEW(dev))
> + if (IS_CHERRYVIEW(dev))
> + cherryview_disable_rps(dev);
> + else if (IS_VALLEYVIEW(dev))
> valleyview_disable_rps(dev);
> else
> gen6_disable_rps(dev);
> @@ -4666,7 +4767,9 @@ static void intel_gen6_powersave_work(struct
> work_struct *work)
>
> mutex_lock(&dev_priv->rps.hw_lock);
>
> - if (IS_VALLEYVIEW(dev)) {
> + if (IS_CHERRYVIEW(dev)) {
> + cherryview_enable_rps(dev);
> + } else if (IS_VALLEYVIEW(dev)) {
> valleyview_enable_rps(dev);
> } else if (IS_BROADWELL(dev)) {
> gen8_enable_rps(dev);
> @@ -4691,7 +4794,7 @@ void intel_enable_gt_powersave(struct drm_device *dev)
> ironlake_enable_rc6(dev);
> intel_init_emon(dev);
> mutex_unlock(&dev->struct_mutex);
> - } else if (IS_GEN6(dev) || IS_GEN7(dev)) {
> + } else if (INTEL_INFO(dev)->gen >= 6) {
> /*
> * PCU communication is slow and this doesn't need to be
> * done at any specific time, so do this out of our fast path
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
