On Fri, May 30, 2014 at 05:16:34PM +0100, Chris Wilson wrote:
> Long ago, back in the racy haydays of 915gm interrupt handling, page
> flips would occasionally go astray and leave the hardware stuck, and the
> display not updating. This annoyed people who relied on their systems
> being able to display continuously updating information 24/7, and so
> some code to detect when the driver missed the page flip completion
> signal was added. Until recently, it was presumed that the interrupt
> handling was now flawless, but once again Simon Farnsworth has found a
> system whose display will stall. Reinstate the pageflip stall detection,
> which works by checking to see if the hardware has been updated to the
> new framebuffer address following each vblank. If the hardware is
> scanning out from the new framebuffer, but we still think the flip is
> pending, then we kick our driver into submision.
> 
> This is a continuation of the effort started with
> commit 4e5359cd053bfb7d8dabe4a63624a5726848ffbc
> Author: Simon Farnsworth <simon.farnswo...@onelan.co.uk>
> Date:   Wed Sep 1 17:47:52 2010 +0100
> 
>     drm/i915: Avoid pageflipping freeze when we miss the flip prepare 
> interrupt
> 
> This now includes a belt-and-braces approach to make sure the driver
> (or the hardware) doesn't miss an interrupt and cause us to stop
> updating the display should the unthinkable happen and the pageflip fail - 
> i.e.
> that the user is able to continue submitting flips.
> 
> Reported-by: Simon Farnsworth <si...@farnz.org.uk>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75502
> Signed-off-by: Chris Wilson <ch...@chris-wilson.co.uk>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c  |  33 ++++++++---
>  drivers/gpu/drm/i915/i915_irq.c      |  85 ++++++++-------------------
>  drivers/gpu/drm/i915/intel_display.c | 109 
> ++++++++++++++++++++++++++++++-----
>  drivers/gpu/drm/i915/intel_drv.h     |   2 +
>  4 files changed, 144 insertions(+), 85 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c 
> b/drivers/gpu/drm/i915/i915_debugfs.c
> index 0b063c03d188..a05a33ab4b33 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -581,6 +581,7 @@ static int i915_gem_pageflip_info(struct seq_file *m, 
> void *data)
>  {
>       struct drm_info_node *node = m->private;
>       struct drm_device *dev = node->minor->dev;
> +     struct drm_i915_private *dev_priv = dev->dev_private;
>       unsigned long flags;
>       struct intel_crtc *crtc;
>  
> @@ -602,23 +603,37 @@ static int i915_gem_pageflip_info(struct seq_file *m, 
> void *data)
>                               seq_printf(m, "Flip pending (waiting for vsync) 
> on pipe %c (plane %c)\n",
>                                          pipe, plane);
>                       }
> +                     seq_printf(m, "Flip queued on frame %d, now %d\n",
> +                                work->sbc, 
> atomic_read(&dev->vblank[crtc->pipe].count));
>                       if (work->enable_stall_check)
>                               seq_puts(m, "Stall check enabled, ");
>                       else
>                               seq_puts(m, "Stall check waiting for page flip 
> ioctl, ");
>                       seq_printf(m, "%d prepares\n", 
> atomic_read(&work->pending));
>  
> -                     if (work->old_fb_obj) {
> -                             struct drm_i915_gem_object *obj = 
> work->old_fb_obj;
> -                             if (obj)
> -                                     seq_printf(m, "Old framebuffer 
> gtt_offset 0x%08lx\n",
> -                                                
> i915_gem_obj_ggtt_offset(obj));
> +                     {
> +                             u32 addr;
> +
> +                             if (INTEL_INFO(dev)->gen >= 4)
> +                                     addr = DSPSURF(crtc->plane);
> +                             else
> +                                     addr = DSPADDR(crtc->plane);
> +
> +                             seq_printf(m, "Current scanout address 
> 0x%08x\n", 
> +                                        I915_READ(addr));

"current" makes me think of the live address. But right now I can't think of a
better term to use there.

>                       }

I don't like the extra {} block. Such things always give me an
impression that this is a debug hack someone forgot to remove.

> +
>                       if (work->pending_flip_obj) {
> -                             struct drm_i915_gem_object *obj = 
> work->pending_flip_obj;
> -                             if (obj)
> -                                     seq_printf(m, "New framebuffer 
> gtt_offset 0x%08lx\n",
> -                                                
> i915_gem_obj_ggtt_offset(obj));
> +                             bool complete;
> +
> +                             seq_printf(m, "New framebuffer address 
> 0x%08lx\n", (long)work->gtt_offset);
> +
> +                             if (INTEL_INFO(dev)->gen >= 4)
> +                                     complete = 
> I915_HI_DISPBASE(I915_READ(DSPSURF(crtc->plane))) == work->gtt_offset;
> +                             else
> +                                     complete = 
> I915_READ(DSPADDR(crtc->plane)) == work->gtt_offset;
> +
> +                             seq_printf(m, "MMIO update completed? %d\n", 
> complete);
>                       }
>               }
>               spin_unlock_irqrestore(&dev->event_lock, flags);
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index bce9afbc34bb..3be22794b53c 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -1802,8 +1802,9 @@ static void valleyview_pipestat_irq_handler(struct 
> drm_device *dev, u32 iir)
>       spin_unlock(&dev_priv->irq_lock);
>  
>       for_each_pipe(pipe) {
> -             if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS)
> -                     intel_pipe_handle_vblank(dev, pipe);
> +             if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS &&
> +                 intel_pipe_handle_vblank(dev, pipe))
> +                     intel_check_page_flip(dev, pipe);

Can't we stick this call into intel_pipe_handle_vblank()?

>  
>               if (pipe_stats[pipe] & PLANE_FLIP_DONE_INT_STATUS_VLV) {
>                       intel_prepare_page_flip(dev, pipe);
> @@ -2079,8 +2080,9 @@ static void ilk_display_irq_handler(struct drm_device 
> *dev, u32 de_iir)
>               DRM_ERROR("Poison interrupt\n");
>  
>       for_each_pipe(pipe) {
> -             if (de_iir & DE_PIPE_VBLANK(pipe))
> -                     intel_pipe_handle_vblank(dev, pipe);
> +             if (de_iir & DE_PIPE_VBLANK(pipe) &&
> +                 intel_pipe_handle_vblank(dev, pipe))
> +                     intel_check_page_flip(dev, pipe);
>  
>               if (de_iir & DE_PIPE_FIFO_UNDERRUN(pipe))
>                       if (intel_set_cpu_fifo_underrun_reporting(dev, pipe, 
> false))
> @@ -2129,8 +2131,9 @@ static void ivb_display_irq_handler(struct drm_device 
> *dev, u32 de_iir)
>               intel_opregion_asle_intr(dev);
>  
>       for_each_pipe(pipe) {
> -             if (de_iir & (DE_PIPE_VBLANK_IVB(pipe)))
> -                     intel_pipe_handle_vblank(dev, pipe);
> +             if (de_iir & (DE_PIPE_VBLANK_IVB(pipe)) &&
> +                 intel_pipe_handle_vblank(dev, pipe))
> +                     intel_check_page_flip(dev, pipe);
>  
>               /* plane/pipes map 1:1 on ilk+ */
>               if (de_iir & DE_PLANE_FLIP_DONE_IVB(pipe)) {
> @@ -2265,8 +2268,10 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
>                       continue;
>  
>               pipe_iir = I915_READ(GEN8_DE_PIPE_IIR(pipe));
> -             if (pipe_iir & GEN8_PIPE_VBLANK)
> -                     intel_pipe_handle_vblank(dev, pipe);
> +
> +             if (pipe_iir & GEN8_PIPE_VBLANK &&
> +                 intel_pipe_handle_vblank(dev, pipe))
> +                     intel_check_page_flip(dev, pipe);
>  
>               if (pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE) {
>                       intel_prepare_page_flip(dev, pipe);
> @@ -2575,52 +2580,6 @@ void i915_handle_error(struct drm_device *dev, bool 
> wedged,
>       schedule_work(&dev_priv->gpu_error.work);
>  }
>  
> -static void __always_unused i915_pageflip_stall_check(struct drm_device 
> *dev, int pipe)
> -{
> -     struct drm_i915_private *dev_priv = dev->dev_private;
> -     struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
> -     struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> -     struct drm_i915_gem_object *obj;
> -     struct intel_unpin_work *work;
> -     unsigned long flags;
> -     bool stall_detected;
> -
> -     /* Ignore early vblank irqs */
> -     if (intel_crtc == NULL)
> -             return;
> -
> -     spin_lock_irqsave(&dev->event_lock, flags);
> -     work = intel_crtc->unpin_work;
> -
> -     if (work == NULL ||
> -         atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE ||
> -         !work->enable_stall_check) {
> -             /* Either the pending flip IRQ arrived, or we're too early. 
> Don't check */
> -             spin_unlock_irqrestore(&dev->event_lock, flags);
> -             return;
> -     }
> -
> -     /* Potential stall - if we see that the flip has happened, assume a 
> missed interrupt */
> -     obj = work->pending_flip_obj;
> -     if (INTEL_INFO(dev)->gen >= 4) {
> -             int dspsurf = DSPSURF(intel_crtc->plane);
> -             stall_detected = I915_HI_DISPBASE(I915_READ(dspsurf)) ==
> -                                     i915_gem_obj_ggtt_offset(obj);
> -     } else {
> -             int dspaddr = DSPADDR(intel_crtc->plane);
> -             stall_detected = I915_READ(dspaddr) == 
> (i915_gem_obj_ggtt_offset(obj) +
> -                                                     crtc->y * 
> crtc->primary->fb->pitches[0] +
> -                                                     crtc->x * 
> crtc->primary->fb->bits_per_pixel/8);
> -     }
> -
> -     spin_unlock_irqrestore(&dev->event_lock, flags);
> -
> -     if (stall_detected) {
> -             DRM_DEBUG_DRIVER("Pageflip stall detected\n");
> -             intel_prepare_page_flip(dev, intel_crtc->plane);
> -     }
> -}
> -
>  /* Called from drm generic code, passed 'crtc' which
>   * we use as a pipe index
>   */
> @@ -3726,7 +3685,7 @@ static bool i8xx_handle_vblank(struct drm_device *dev,
>               return false;
>  
>       if ((iir & flip_pending) == 0)
> -             return false;
> +             goto check_page_flip;
>  
>       intel_prepare_page_flip(dev, plane);
>  
> @@ -3737,11 +3696,14 @@ static bool i8xx_handle_vblank(struct drm_device *dev,
>        * an interrupt per se, we watch for the change at vblank.
>        */
>       if (I915_READ16(ISR) & flip_pending)
> -             return false;
> +             goto check_page_flip;
>  
>       intel_finish_page_flip(dev, pipe);
> -
>       return true;
> +
> +check_page_flip:
> +     intel_check_page_flip(dev, pipe);
> +     return false;

Ah right this guy might not appreciate the check in
intel_pipe_handle_vblank(). Oh well.

>  }
>  
>  static irqreturn_t i8xx_irq_handler(int irq, void *arg)
> @@ -3911,7 +3873,7 @@ static bool i915_handle_vblank(struct drm_device *dev,
>               return false;
>  
>       if ((iir & flip_pending) == 0)
> -             return false;
> +             goto check_page_flip;
>  
>       intel_prepare_page_flip(dev, plane);
>  
> @@ -3922,11 +3884,14 @@ static bool i915_handle_vblank(struct drm_device *dev,
>        * an interrupt per se, we watch for the change at vblank.
>        */
>       if (I915_READ(ISR) & flip_pending)
> -             return false;
> +             goto check_page_flip;
>  
>       intel_finish_page_flip(dev, pipe);
> -
>       return true;
> +
> +check_page_flip:
> +     intel_check_page_flip(dev, pipe);
> +     return false;
>  }
>  
>  static irqreturn_t i915_irq_handler(int irq, void *arg)
> diff --git a/drivers/gpu/drm/i915/intel_display.c 
> b/drivers/gpu/drm/i915/intel_display.c
> index 318747b444c6..764b277e5937 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3303,6 +3303,22 @@ bool intel_has_pending_fb_unpin(struct drm_device *dev)
>       return false;
>  }
>  
> +static void page_flip_completed(struct drm_i915_private *dev_priv,
> +                             struct intel_crtc *intel_crtc,
> +                             struct intel_unpin_work *work)
> +{

assert_spin_locked(event_lock) ?

> +     if (work->event)
> +             drm_send_vblank_event(dev_priv->dev,
> +                                   intel_crtc->pipe,
> +                                   work->event);
> +
> +     wake_up_all(&dev_priv->pending_flip_queue);
> +     queue_work(dev_priv->wq, &work->work);
> +
> +     trace_i915_flip_complete(intel_crtc->plane,
> +                              work->pending_flip_obj);
> +}
> +
>  void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
>  {
>       struct drm_device *dev = crtc->dev;
> @@ -8848,21 +8864,12 @@ static void do_intel_finish_page_flip(struct 
> drm_device *dev,
>  
>       /* and that the unpin work is consistent wrt ->pending. */
>       smp_rmb();
> -
>       intel_crtc->unpin_work = NULL;
>  
> -     if (work->event)
> -             drm_send_vblank_event(dev, intel_crtc->pipe, work->event);
> -
> +     page_flip_completed(dev_priv, intel_crtc, work);
>       drm_crtc_vblank_put(crtc);
>  
>       spin_unlock_irqrestore(&dev->event_lock, flags);
> -
> -     wake_up_all(&dev_priv->pending_flip_queue);
> -
> -     queue_work(dev_priv->wq, &work->work);
> -
> -     trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
>  }
>  
>  void intel_finish_page_flip(struct drm_device *dev, int pipe)
> @@ -8940,11 +8947,17 @@ void intel_prepare_page_flip(struct drm_device *dev, 
> int plane)
>       spin_unlock_irqrestore(&dev->event_lock, flags);
>  }
>  
> +static inline int crtc_sbc(struct intel_crtc *crtc)
> +{
> +     return atomic_read(&crtc->base.dev->vblank[crtc->pipe].count);
> +}

msc?

> +
>  static inline void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
>  {
>       /* Ensure that the work item is consistent when activating it ... */
>       smp_wmb();
>       atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
> +     intel_crtc->unpin_work->sbc = crtc_sbc(intel_crtc);
>       /* and that it is marked active as soon as the irq could fire. */
>       smp_wmb();
>  }
> @@ -9196,6 +9209,58 @@ static int intel_default_queue_flip(struct drm_device 
> *dev,
>       return -ENODEV;
>  }
>  
> +static bool __intel_pageflip_stall_check(struct drm_device *dev,
> +                                      struct drm_crtc *crtc,
> +                                      struct intel_unpin_work *work)
> +{
> +     struct drm_i915_private *dev_priv = dev->dev_private;
> +     struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +     struct drm_i915_gem_object *obj;
> +     bool stall_detected;
> +
> +     if (atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE)
> +             return true;
> +
> +     if (!work->enable_stall_check)
> +             return false;
> +
> +     if ((crtc_sbc(intel_crtc) - intel_crtc->unpin_work->sbc) < 3)
> +             return false;
> +
> +     /* Potential stall - if we see that the flip has happened, assume a 
> missed interrupt */
> +     obj = work->pending_flip_obj;
> +     if (INTEL_INFO(dev)->gen >= 4) {
> +             int dspsurf = DSPSURF(intel_crtc->plane);
> +             stall_detected = I915_HI_DISPBASE(I915_READ(dspsurf)) == 
> work->gtt_offset;
> +     } else {
> +             int dspaddr = DSPADDR(intel_crtc->plane);
> +             stall_detected = I915_READ(dspaddr) == work->gtt_offset;
> +     }

Hmm. There's a slight danger of premature flip completion if the user
issues a flip to the same address, and it really takes longer than three
frames to complete. The hardware flip counter could be used to avoid that.
I guess for for pre-ctg there isn't much we can do except hope that flips
never take more than three frames.

> +
> +     return stall_detected;
> +}
> +
> +void intel_check_page_flip(struct drm_device *dev, int pipe)
> +{
> +     struct drm_i915_private *dev_priv = dev->dev_private;
> +     struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
> +     struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +     unsigned long flags;
> +
> +     if (crtc == NULL)
> +             return;
> +
> +     spin_lock_irqsave(&dev->event_lock, flags);
> +     if (intel_crtc->unpin_work &&
> +         __intel_pageflip_stall_check(dev, crtc, intel_crtc->unpin_work)) {
> +             WARN_ONCE(1, "Kicking stuck page flip\n");
> +             drm_vblank_put(dev, intel_crtc->pipe);
> +             page_flip_completed(dev_priv, intel_crtc, 
> intel_crtc->unpin_work);
> +             intel_crtc->unpin_work = NULL;
> +     }
> +     spin_unlock_irqrestore(&dev->event_lock, flags);
> +}
> +
>  static int intel_crtc_page_flip(struct drm_crtc *crtc,
>                               struct drm_framebuffer *fb,
>                               struct drm_pending_vblank_event *event,
> @@ -9243,12 +9308,25 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
>       /* We borrow the event spin lock for protecting unpin_work */
>       spin_lock_irqsave(&dev->event_lock, flags);
>       if (intel_crtc->unpin_work) {
> -             spin_unlock_irqrestore(&dev->event_lock, flags);
> -             kfree(work);
> +             bool stall;
> +
> +             /* Before declaring the flip queue wedged, check if
> +              * the hardware completed the operation behind our backs.
> +              */
> +             stall = __intel_pageflip_stall_check(dev, crtc,
> +                                                  intel_crtc->unpin_work);
>               drm_crtc_vblank_put(crtc);
>  
> -             DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
> -             return -EBUSY;
> +             if (stall) {
> +                     DRM_DEBUG_DRIVER("flip queue: previous flip completed, 
> continuing\n");
> +                     page_flip_completed(dev_priv, intel_crtc, 
> intel_crtc->unpin_work);

I was going to say you're leaking the vblank ref here until I saw that
it was dropped earlier. Feels a bit strange to basically drop the ref
you just got for this flip, and take over the ref from the earlier flip.

I'd just move the drm_vblank_put() call into page_flip_completed().

> +             } else {
> +                     DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
> +                     spin_unlock_irqrestore(&dev->event_lock, flags);
> +
> +                     kfree(work);
> +                     return -EBUSY;
> +             }
>       }
>       intel_crtc->unpin_work = work;
>       spin_unlock_irqrestore(&dev->event_lock, flags);
> @@ -9268,8 +9346,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
>  
>       work->pending_flip_obj = obj;
>  
> -     work->enable_stall_check = true;
> -
>       atomic_inc(&intel_crtc->unpin_work_count);
>       intel_crtc->reset_counter = 
> atomic_read(&dev_priv->gpu_error.reset_counter);
>  
> @@ -9292,6 +9368,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
>  
>       work->gtt_offset =
>               i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset;
> +     work->enable_stall_check = true;
>  
>       ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, ring, 
> page_flip_flags);
>       if (ret)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h 
> b/drivers/gpu/drm/i915/intel_drv.h
> index c597b0da93b6..b17c295fe967 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -619,6 +619,7 @@ struct intel_unpin_work {
>       u32 flip_count;
>       u32 gtt_offset;
>       bool enable_stall_check;
> +     int sbc;
>  };
>  
>  struct intel_set_config {
> @@ -761,6 +762,7 @@ __intel_framebuffer_create(struct drm_device *dev,
>  void intel_prepare_page_flip(struct drm_device *dev, int plane);
>  void intel_finish_page_flip(struct drm_device *dev, int pipe);
>  void intel_finish_page_flip_plane(struct drm_device *dev, int plane);
> +void intel_check_page_flip(struct drm_device *dev, int pipe);
>  struct intel_shared_dpll *intel_crtc_to_shared_dpll(struct intel_crtc *crtc);
>  void assert_shared_dpll(struct drm_i915_private *dev_priv,
>                       struct intel_shared_dpll *pll,
> -- 
> 2.0.0.rc4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to