On Fri, Jul 25, 2014 at 02:55:00PM +0300, Imre Deak wrote:
> On Sat, 2014-06-28 at 02:04 +0300, ville.syrj...@linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> >
> > CHV has two display PHYs so there are also two cmnlane power wells. Add
> > the approriate code to power the wells up/down.
> >
> > Like on VLV we do the cmnreset assert/deassert and the DPLL refclock
> > enabling at approriate times.
> >
> > This code actually works on my bsw.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 1 +
> > drivers/gpu/drm/i915/intel_pm.c | 89
> > +++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 90 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index d246609..19e68d6 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -512,6 +512,7 @@ enum punit_power_well {
> > PUNIT_POWER_WELL_DPIO_TX_C_LANES_23 = 9,
> > PUNIT_POWER_WELL_DPIO_RX0 = 10,
> > PUNIT_POWER_WELL_DPIO_RX1 = 11,
> > + PUNIT_POWER_WELL_DPIO_CMN_D = 12,
> >
> > PUNIT_POWER_WELL_NUM,
> > };
> > diff --git a/drivers/gpu/drm/i915/intel_pm.c
> > b/drivers/gpu/drm/i915/intel_pm.c
> > index e2b956e..f88490b 100644
> > --- a/drivers/gpu/drm/i915/intel_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > @@ -6200,6 +6200,64 @@ static void vlv_dpio_cmn_power_well_disable(struct
> > drm_i915_private *dev_priv,
> > vlv_set_power_well(dev_priv, power_well, false);
> > }
> >
> > +static void chv_dpio_cmn_power_well_enable(struct drm_i915_private
> > *dev_priv,
> > + struct i915_power_well *power_well)
> > +{
> > + enum dpio_phy phy;
> > +
> > + WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
> > + power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
> > +
> > + /*
> > + * Enable the CRI clock source so we can get at the
> > + * display and the reference clock for VGA
> > + * hotplug / manual detection.
> > + */
> > + if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
> > + phy = DPIO_PHY0;
> > + I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
> > + DPLL_REFA_CLK_ENABLE_VLV);
> > + I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
> > + DPLL_REFA_CLK_ENABLE_VLV |
> > DPLL_INTEGRATED_CRI_CLK_VLV);
>
> Any reason the two clocks are enabled sequentially? For PHY1 you don't
> do this..
I think I meant to enable the ref clock for both pipes A and B. So the
first rmw should have hit DPLL(PIPE_A).
> In any case:
> Reviewed-by: Imre Deak <imre.d...@intel.com>
>
> > + } else {
> > + phy = DPIO_PHY1;
> > + I915_WRITE(DPLL(PIPE_C), I915_READ(DPLL(PIPE_C)) |
> > + DPLL_REFA_CLK_ENABLE_VLV |
> > DPLL_INTEGRATED_CRI_CLK_VLV);
> > + }
> > + udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
> > + vlv_set_power_well(dev_priv, power_well, true);
> > +
> > + /* Poll for phypwrgood signal */
> > + if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
> > + DRM_ERROR("Display PHY %d is not power up\n", phy);
> > +
> > + I915_WRITE(DISPLAY_PHY_CONTROL,
> > + PHY_COM_LANE_RESET_DEASSERT(phy,
> > I915_READ(DISPLAY_PHY_CONTROL)));
> > +}
> > +
> > +static void chv_dpio_cmn_power_well_disable(struct drm_i915_private
> > *dev_priv,
> > + struct i915_power_well *power_well)
> > +{
> > + enum dpio_phy phy;
> > +
> > + WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
> > + power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
> > +
> > + if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
> > + phy = DPIO_PHY0;
> > + assert_pll_disabled(dev_priv, PIPE_A);
> > + assert_pll_disabled(dev_priv, PIPE_B);
> > + } else {
> > + phy = DPIO_PHY1;
> > + assert_pll_disabled(dev_priv, PIPE_C);
> > + }
> > +
> > + I915_WRITE(DISPLAY_PHY_CONTROL,
> > + PHY_COM_LANE_RESET_ASSERT(phy,
> > I915_READ(DISPLAY_PHY_CONTROL)));
> > +
> > + vlv_set_power_well(dev_priv, power_well, false);
> > +}
> > +
> > static void check_power_well_state(struct drm_i915_private *dev_priv,
> > struct i915_power_well *power_well)
> > {
> > @@ -6369,6 +6427,18 @@ EXPORT_SYMBOL_GPL(i915_release_power_well);
> > BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
> > BIT(POWER_DOMAIN_INIT))
> >
> > +#define CHV_DPIO_CMN_BC_POWER_DOMAINS ( \
> > + BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
> > + BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
> > + BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
> > + BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
> > + BIT(POWER_DOMAIN_INIT))
> > +
> > +#define CHV_DPIO_CMN_D_POWER_DOMAINS ( \
> > + BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \
> > + BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
> > + BIT(POWER_DOMAIN_INIT))
> > +
> > static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
> > .sync_hw = i9xx_always_on_power_well_noop,
> > .enable = i9xx_always_on_power_well_noop,
> > @@ -6498,6 +6568,13 @@ static struct i915_power_well vlv_power_wells[] = {
> > },
> > };
> >
> > +static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
> > + .sync_hw = vlv_power_well_sync_hw,
> > + .enable = chv_dpio_cmn_power_well_enable,
> > + .disable = chv_dpio_cmn_power_well_disable,
> > + .is_enabled = vlv_power_well_enabled,
> > +};
> > +
> > static struct i915_power_well chv_power_wells[] = {
> > {
> > .name = "always-on",
> > @@ -6505,6 +6582,18 @@ static struct i915_power_well chv_power_wells[] = {
> > .domains = VLV_ALWAYS_ON_POWER_DOMAINS,
> > .ops = &i9xx_always_on_power_well_ops,
> > },
> > + {
> > + .name = "dpio-common-bc",
> > + .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS,
> > + .data = PUNIT_POWER_WELL_DPIO_CMN_BC,
> > + .ops = &chv_dpio_cmn_power_well_ops,
> > + },
> > + {
> > + .name = "dpio-common-d",
> > + .domains = CHV_DPIO_CMN_D_POWER_DOMAINS,
> > + .data = PUNIT_POWER_WELL_DPIO_CMN_D,
> > + .ops = &chv_dpio_cmn_power_well_ops,
> > + },
> > };
> >
> > static struct i915_power_well *lookup_power_well(struct drm_i915_private
> > *dev_priv,
>
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
