From: Satheeshakrishna M <[email protected]>
This patch defines the necessary SKL registers for implementing the
new clocking mechanism.
v2: Addressed review comments by Damien
- Added code comment
- Introduced enum for WRPLL values
v3: Rebase on top of nightly (minor conflict in i915_reg.h)
v4: Use 0x, not 0X (Ville)
Signed-off-by: Satheeshakrishna M <[email protected]> (v2)
Signed-off-by: Damien Lespiau <[email protected]> (v3,v4)
---
drivers/gpu/drm/i915/i915_reg.h | 84 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 417075d..2364ece 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6336,6 +6336,90 @@ enum punit_power_well {
#define LCPLL_CD_SOURCE_FCLK (1<<21)
#define LCPLL_CD_SOURCE_FCLK_DONE (1<<19)
+/*
+ * SKL Clocks
+ */
+
+/* CDCLK_CTL */
+#define CDCLK_CTL 0x46000
+#define CDCLK_FREQ_SEL_MASK (3<<26)
+#define CDCLK_FREQ_450_432 (0<<26)
+#define CDCLK_FREQ_540 (1<<26)
+#define CDCLK_FREQ_337_308 (2<<26)
+#define CDCLK_FREQ_675_617 (3<<26)
+#define CDCLK_FREQ_DECIMAL_MASK (0x7ff)
+
+/* LCPLL_CTL */
+#define LCPLL1_CTL 0x46010
+#define LCPLL2_CTL 0x46014
+#define LCPLL_PLL_ENABLE (1<<31)
+
+/* DPLL control1 */
+#define DPLL_CTRL1 0x6C058
+#define DPLL_CTRL1_HDMI_MODE(id) (1<<((id)*6+5))
+#define DPLL_CTRL1_SSC(id) (1<<((id)*6+4))
+#define DPLL_CRTL1_LINK_RATE_MASK(id) (7<<((id)*6+1))
+#define DPLL_CRTL1_LINK_RATE(linkrate, id) ((linkrate)<<((id)*6+1))
+#define DPLL_CTRL1_OVERRIDE(id) (1<<((id)*6))
+#define DPLL_CRTL1_LINK_RATE_2700 0
+#define DPLL_CRTL1_LINK_RATE_1350 1
+#define DPLL_CRTL1_LINK_RATE_810 2
+#define DPLL_CRTL1_LINK_RATE_1620 3
+#define DPLL_CRTL1_LINK_RATE_1080 4
+#define DPLL_CRTL1_LINK_RATE_2160 5
+
+/* DPLL control2 */
+#define DPLL_CTRL2 0x6C05C
+#define DPLL_CTRL2_DDI_CLK_OFF(port) (1<<(port+15))
+#define DPLL_CTRL2_DDI_CLK_SEL_MASK(port) (3<<((port)*3+1))
+#define DPLL_CTRL2_DDI_CLK_SEL(clk, port) (clk<<((port)*3+1))
+#define DPLL_CTRL2_DDI_SEL_OVERRIDE(port) (1<<(port*3))
+
+/* DPLL Status */
+#define DPLL_STATUS 0x6C060
+#define DPLL_LOCK(id) (1<<((id)*8))
+
+/* DPLL cfg */
+#define DPLL1_CFGCR1 0x6C040
+#define DPLL2_CFGCR1 0x6C048
+#define DPLL3_CFGCR1 0x6C050
+#define DPLL_CFGCR1_FREQ_ENABLE (1<<31)
+#define DPLL_CFGCR1_DCO_FRACTION_MASK (0x7fff<<9)
+#define DPLL_CFGCR1_DCO_FRACTION(x) (x<<9)
+#define DPLL_CFGCR1_DCO_INTEGER_MASK (0x1ff)
+
+#define DPLL1_CFGCR2 0x6C044
+#define DPLL2_CFGCR2 0x6C04C
+#define DPLL3_CFGCR2 0x6C054
+#define DPLL_CFGCR2_QDIV_RATIO_MASK (0xff<<8)
+#define DPLL_CFGCR2_QDIV_RATIO(x) (x<<8)
+#define DPLL_CFGCR2_QDIV_MODE(x) (x<<7)
+#define DPLL_CFGCR2_KDIV_MASK (3<<5)
+#define DPLL_CFGCR2_KDIV(x) (x<<5)
+#define DPLL_CFGCR2_PDIV_MASK (7<<2)
+#define DPLL_CFGCR2_PDIV(x) (x<<2)
+#define DPLL_CFGCR2_CENTRAL_FREQ_MASK (3)
+
+enum central_freq {
+ freq_9600 = 0,
+ freq_9000 = 1,
+ freq_8400 = 3,
+};
+
+enum pdiv {
+ pdiv_1 = 0,
+ pdiv_2 = 1,
+ pdiv_3 = 2,
+ pdiv_7 = 4,
+};
+
+enum kdiv {
+ kdiv_5 = 0,
+ kdiv_2 = 1,
+ kdiv_3 = 2,
+ kdiv_1 = 3,
+};
+
/* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this
register,
* since on HSW we can't write to it using I915_WRITE. */
#define D_COMP_HSW (MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
--
1.8.3.1
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
