So we can apply the old aux_ctl = dp_ctl + 0x10 rule again.
Signed-off-by: Damien Lespiau <damien.lesp...@intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 6b1da40..a95fb47 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -749,7 +749,16 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct
intel_connector *connector)
BUG();
}
- if (!HAS_DDI(dev))
+ /*
+ * The AUX_CTL register is usually DP_CTL + 0x10.
+ *
+ * On Haswell and Broadwell though:
+ * - Both port A DDI_BUF_CTL and DDI_AUX_CTL are on the CPU
+ * - Port B/C/D AUX channels are on the PCH, DDI_BUF_CTL on the CPU
+ *
+ * Skylake moves AUX_CTL back next to DDI_BUF_CTL, on the CPU.
+ */
+ if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
intel_dp->aux.name = name;
--
1.8.3.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
