This logically belongs to the WM state, so do it there.
Signed-off-by: Damien Lespiau <[email protected]>
---
drivers/gpu/drm/i915/intel_pm.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index d378879..8d24a4d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3020,6 +3020,32 @@ static unsigned int skl_cursor_allocation(struct
intel_wm_config *config)
return 8;
}
+static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
+{
+ entry->start = reg & 0x3ff;
+ entry->end = (reg >> 16) & 0x3ff;
+}
+
+static void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
+ struct skl_ddb_allocation *ddb /* out */)
+{
+ struct drm_device *dev = dev_priv->dev;
+ enum pipe pipe;
+ int plane;
+ u32 val;
+
+ for_each_pipe(dev_priv, pipe) {
+ for_each_plane(pipe, plane) {
+ val = I915_READ(PLANE_BUF_CFG(pipe, plane));
+ skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane],
+ val);
+ }
+
+ val = I915_READ(CUR_BUF_CFG(pipe));
+ skl_ddb_entry_init_from_hw(&ddb->cursor[pipe], val);
+ }
+}
+
static unsigned int
skl_plane_relative_data_rate(struct intel_plane_wm_parameters *p)
{
@@ -3810,8 +3836,11 @@ static void skl_pipe_wm_get_hw_state(struct drm_crtc
*crtc)
void skl_wm_get_hw_state(struct drm_device *dev)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct skl_ddb_allocation *ddb = &dev_priv->wm.skl_hw.ddb;
struct drm_crtc *crtc;
+ skl_ddb_get_hw_state(dev_priv, ddb);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
skl_pipe_wm_get_hw_state(crtc);
}
--
1.8.3.1
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
