From: Ville Syrjälä <ville.syrj...@linux.intel.com>
Use pack_aux() to construct the PSR exit DPMS D0 AUX message,
and use the defines from dp_dp_helper.h to populate the message
contents.
Cc: Rodrigo Vivi <rodrigo.v...@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 2 --
drivers/gpu/drm/i915/intel_dp.c | 16 +++++++++++-----
2 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e4d7607..fb60493 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2453,9 +2453,7 @@ enum punit_power_well {
#define EDP_PSR_AUX_CTL(dev) (EDP_PSR_BASE(dev) + 0x10)
#define EDP_PSR_AUX_DATA1(dev) (EDP_PSR_BASE(dev) + 0x14)
-#define EDP_PSR_DPCD_COMMAND 0x80060000
#define EDP_PSR_AUX_DATA2(dev) (EDP_PSR_BASE(dev) + 0x18)
-#define EDP_PSR_DPCD_NORMAL_OPERATION (1<<24)
#define EDP_PSR_AUX_DATA3(dev) (EDP_PSR_BASE(dev) + 0x1c)
#define EDP_PSR_AUX_DATA4(dev) (EDP_PSR_BASE(dev) + 0x20)
#define EDP_PSR_AUX_DATA5(dev) (EDP_PSR_BASE(dev) + 0x24)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 81d7681..05bab25 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -225,7 +225,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
}
static uint32_t
-pack_aux(uint8_t *src, int src_bytes)
+pack_aux(const uint8_t *src, int src_bytes)
{
int i;
uint32_t v = 0;
@@ -1741,8 +1741,14 @@ static void intel_edp_psr_enable_sink(struct intel_dp
*intel_dp)
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t aux_clock_divider;
int precharge = 0x3;
- int msg_size = 5; /* Header(4) + Message(1) */
bool only_standby = false;
+ static const uint8_t aux_msg[] = {
+ [0] = DP_AUX_NATIVE_WRITE << 4,
+ [1] = DP_SET_POWER >> 8,
+ [2] = DP_SET_POWER & 0xff,
+ [3] = 1 - 1,
+ [4] = DP_SET_POWER_D0,
+ };
aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
@@ -1758,11 +1764,11 @@ static void intel_edp_psr_enable_sink(struct intel_dp
*intel_dp)
DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
/* Setup AUX registers */
- I915_WRITE(EDP_PSR_AUX_DATA1(dev), EDP_PSR_DPCD_COMMAND);
- I915_WRITE(EDP_PSR_AUX_DATA2(dev), EDP_PSR_DPCD_NORMAL_OPERATION);
+ I915_WRITE(EDP_PSR_AUX_DATA1(dev), pack_aux(&aux_msg[0], 4));
+ I915_WRITE(EDP_PSR_AUX_DATA2(dev), pack_aux(&aux_msg[4], 1));
I915_WRITE(EDP_PSR_AUX_CTL(dev),
DP_AUX_CH_CTL_TIME_OUT_400us |
- (msg_size << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+ (5 << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
(precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
(aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
}
--
1.8.5.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
