On 09/12/14 09:51, Daniel Vetter wrote: > On Fri, Sep 12, 2014 at 08:49:48AM +0100, Chris Clayton wrote: >> Hi, >> >> Firstly, please cc me on any reply because I'm not subscribed to LKML. >> >> I've just built and installed the current development kernel >> (v3.17-rc4-222-gc73f6fd)on a desktop machine and I'm >> getting a warning that I haven't seen before. A full dmesg is attached, but >> the warning is: > > Please boot with drm.debug=0xe, reproduce the issue and attach the > complete dmesg (from boot-up to the backtrace). > > Thanks, Daniel
Thanks Daniel. Here's the debug dmesg. [ 0.078412] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.078447] pci 0000:02:00.0: supports D1 D2 [ 0.078448] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080016] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.080057] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.080060] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff] [ 0.080066] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.080108] pci 0000:03:01.0: [1131:7133] type 00 class 0x048000 [ 0.080124] pci 0000:03:01.0: reg 0x10: [mem 0xe1605000-0xe16057ff] [ 0.080184] pci 0000:03:01.0: supports D1 D2 [ 0.080235] pci 0000:03:07.0: [104c:8024] type 00 class 0x0c0010 [ 0.080250] pci 0000:03:07.0: reg 0x10: [mem 0xe1604000-0xe16047ff] [ 0.080259] pci 0000:03:07.0: reg 0x14: [mem 0xe1600000-0xe1603fff] [ 0.080311] pci 0000:03:07.0: supports D1 D2 [ 0.080313] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot [ 0.080373] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.080417] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff] [ 0.080422] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.080423] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.080425] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.080427] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.080428] pci 0000:00:1e.0: bridge window [mem 0xbdd00000-0xfebfffff] (subtractive decode) [ 0.080442] pci_bus 0000:00: on NUMA node 0 [ 0.080784] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.081090] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.081412] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.081714] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.082021] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.082382] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.082721] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.083042] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.083399] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.083525] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.083525] vgaarb: loaded [ 0.083525] vgaarb: bridge control possible 0000:00:02.0 [ 0.083525] SCSI subsystem initialized [ 0.083525] libata version 3.00 loaded. [ 0.083525] ACPI: bus type USB registered [ 0.083525] usbcore: registered new interface driver usbfs [ 0.083525] usbcore: registered new interface driver hub [ 0.084024] usbcore: registered new device driver usb [ 0.084108] Advanced Linux Sound Architecture Driver Initialized. [ 0.084155] PCI: Using ACPI for IRQ routing [ 0.084209] PCI: pci_cache_line_size set to 64 bytes [ 0.084245] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.084246] e820: reserve RAM buffer [mem 0xbdce0000-0xbfffffff] [ 0.084384] Switched to clocksource hpet [ 0.084496] pnp: PnP ACPI init [ 0.084620] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.084659] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.084698] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.084737] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.084775] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.084815] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.084866] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.084960] pnp 00:02: [dma 2] [ 0.084960] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.084960] system 00:03: [io 0x0400-0x04cf] could not be reserved [ 0.084960] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.084960] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved [ 0.084968] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.085104] system 00:05: [mem 0x000cc600-0x000cffff] has been reserved [ 0.085145] system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.085185] system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.085226] system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.085266] system 00:05: [mem 0xbdce0000-0xbdcfffff] could not be reserved [ 0.085307] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.085348] system 00:05: [mem 0x00100000-0xbdcdffff] could not be reserved [ 0.085388] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.085429] system 00:05: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.085469] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.085508] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.085548] system 00:05: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.085588] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved [ 0.085628] system 00:05: [mem 0x000e0000-0x000effff] has been reserved [ 0.085668] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.085675] pnp: PnP ACPI: found 6 devices [ 0.093789] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.093792] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.093794] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 0.093807] pci 0000:00:1f.0: BAR 7: [io 0x0400-0x047f] has bogus alignment [ 0.093849] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.093851] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.093853] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.093857] pci 0000:00:1c.0: BAR 8: assigned [mem 0xbdd00000-0xbdefffff] [ 0.093900] pci 0000:00:1c.0: BAR 9: assigned [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.093942] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.093981] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.094022] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.094063] pci 0000:00:1c.0: bridge window [mem 0xbdd00000-0xbdefffff] [ 0.094105] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.094150] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref] [ 0.094191] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.094229] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.094270] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff] [ 0.094312] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.094356] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.094395] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff] [ 0.094440] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.094442] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.094443] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.094445] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.094446] pci_bus 0000:00: resource 8 [mem 0xbdd00000-0xfebfffff] [ 0.094448] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.094450] pci_bus 0000:01: resource 1 [mem 0xbdd00000-0xbdefffff] [ 0.094451] pci_bus 0000:01: resource 2 [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.094453] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.094454] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe0ffffff] [ 0.094456] pci_bus 0000:02: resource 2 [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.094457] pci_bus 0000:03: resource 1 [mem 0xe1600000-0xe16fffff] [ 0.094459] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.094461] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.094462] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.094464] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] [ 0.094465] pci_bus 0000:03: resource 8 [mem 0xbdd00000-0xfebfffff] [ 0.094488] NET: Registered protocol family 2 [ 0.094705] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.094882] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.095194] TCP: Hash tables configured (established 65536 bind 65536) [ 0.095272] TCP: reno registered [ 0.095307] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.095388] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.095533] NET: Registered protocol family 1 [ 0.095588] pci 0000:00:02.0: Boot video device [ 0.107099] PCI: CLS 32 bytes, default 64 [ 0.107129] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.107173] software IO TLB [mem 0xb9ce0000-0xbdce0000] (64MB) mapped at [ffff8800b9ce0000-ffff8800bdcdffff] [ 0.107485] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107528] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107580] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107640] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107747] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba [ 0.108028] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.110425] fuse init (API version 7.23) [ 0.110571] msgmni has been set to 15887 [ 0.111663] io scheduler noop registered [ 0.111751] io scheduler cfq registered (default) [ 0.112050] intel_idle: does not run on family 6 model 23 [ 0.112100] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.112146] ACPI: Power Button [PWRB] [ 0.112235] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.112276] ACPI: Power Button [PWRF] [ 0.112356] tsc: Marking TSC unstable due to TSC halts in idle [ 0.112400] ACPI: acpi_idle registered with cpuidle [ 0.117536] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.117836] Linux agpgart interface v0.103 [ 0.117922] agpgart-intel 0000:00:00.0: Intel G41 Chipset [ 0.117978] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.118551] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.118725] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.118810] [drm] Initialized drm 1.1.0 20060810 [ 0.118933] ata_piix 0000:00:1f.2: version 2.13 [ 0.119046] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.119689] scsi host0: ata_piix [ 0.119883] scsi host1: ata_piix [ 0.119945] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.119985] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.120076] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.120147] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.120459] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000028000, 6c:f0:49:14:96:87, XID 1c4000c0 IRQ 17 [ 0.120517] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 0.120644] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.121073] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.121128] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.121334] mousedev: PS/2 mouse device common for all mice [ 0.121628] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 0.121824] usbcore: registered new interface driver usbhid [ 0.121862] usbhid: USB HID core driver [ 0.122299] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.122338] TCP: cubic registered [ 0.122383] NET: Registered protocol family 15 [ 0.122749] registered taskstats version 1 [ 0.132477] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 0.132520] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 0.132560] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 0.132598] sound hdaudioC0D2: mono: mono_out=0x0 [ 0.132634] sound hdaudioC0D2: dig-out=0x1e/0x0 [ 0.132670] sound hdaudioC0D2: inputs: [ 0.132706] sound hdaudioC0D2: Rear Mic=0x18 [ 0.132742] sound hdaudioC0D2: Front Mic=0x19 [ 0.132778] sound hdaudioC0D2: Line=0x1a [ 0.132813] sound hdaudioC0D2: CD=0x1c [ 0.132848] sound hdaudioC0D2: dig-in=0x1f [ 0.300332] ata2.01: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL03, max UDMA/100 [ 0.304207] ata1.00: HPA detected: current 1953523055, native 1953525168 [ 0.304253] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133 [ 0.304294] ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.304339] ata1.01: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.01, max UDMA/133 [ 0.306177] ata2.01: configured for UDMA/100 [ 0.308223] ata1.00: configured for UDMA/133 [ 0.346120] ata1.01: configured for UDMA/133 [ 0.351956] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5 [ 0.352158] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) [ 0.352197] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.361075] scsi 0:0:1:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.01 PQ: 0 ANSI: 5 [ 0.361106] sd 0:0:0:0: [sda] Write Protect is off [ 0.361109] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.361140] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.430685] sr 0:0:1:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.430742] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.430897] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 0.430942] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 0.434450] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL03 PQ: 0 ANSI: 5 [ 0.463839] sr 1:0:1:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.464084] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 0.464152] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 0.543506] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > [ 0.544170] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.544414] ALSA device list: [ 0.544450] #0: HDA Intel at 0xe1700000 irq 16 [ 0.587826] EXT3-fs (sda2): recovery required on readonly filesystem [ 0.587867] EXT3-fs (sda2): write access will be enabled during recovery [ 0.966553] random: nonblocking pool is initialized [ 13.469153] kjournald starting. Commit interval 5 seconds [ 13.491568] EXT3-fs (sda2): recovery complete [ 13.491608] EXT3-fs (sda2): mounted filesystem with writeback data mode [ 13.491662] VFS: Mounted root (ext3 filesystem) readonly on device 8:2. [ 13.500916] devtmpfs: mounted [ 13.501626] Freeing unused kernel memory: 776K (ffffffff8165f000 - ffffffff81721000) [ 14.536765] EXT3-fs (sda2): using internal journal [ 15.094630] udevd[101]: starting version 182 [ 15.472482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.482817] ehci-pci: EHCI PCI platform driver [ 15.483042] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 15.483087] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 15.487039] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 15.487057] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe1704000 [ 15.493019] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 15.493096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 15.493139] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.493181] usb usb1: Product: EHCI Host Controller [ 15.493234] usb usb1: Manufacturer: Linux 3.17.0-rc4+ ehci_hcd [ 15.493272] usb usb1: SerialNumber: 0000:00:1d.7 [ 15.493424] hub 1-0:1.0: USB hub found [ 15.493468] hub 1-0:1.0: 8 ports detected [ 15.795035] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 15.824051] uhci_hcd: USB Universal Host Controller Interface driver [ 15.824245] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 15.824299] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 15.824386] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100 [ 15.824477] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.824517] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.824558] usb usb2: Product: UHCI Host Controller [ 15.824594] usb usb2: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 15.824632] usb usb2: SerialNumber: 0000:00:1d.0 [ 15.824829] hub 2-0:1.0: USB hub found [ 15.824874] hub 2-0:1.0: 2 ports detected [ 15.825122] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 15.825164] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 15.825226] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 [ 15.825305] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.825345] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.825386] usb usb3: Product: UHCI Host Controller [ 15.825422] usb usb3: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 15.825460] usb usb3: SerialNumber: 0000:00:1d.1 [ 15.825586] hub 3-0:1.0: USB hub found [ 15.825628] hub 3-0:1.0: 2 ports detected [ 15.825812] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 15.825853] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 15.825920] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300 [ 15.825993] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.826066] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.826107] usb usb4: Product: UHCI Host Controller [ 15.826143] usb usb4: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 15.826181] usb usb4: SerialNumber: 0000:00:1d.2 [ 15.826306] hub 4-0:1.0: USB hub found [ 15.826348] hub 4-0:1.0: 2 ports detected [ 15.826525] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 15.826566] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 15.826625] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 15.826699] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.826740] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.826780] usb usb5: Product: UHCI Host Controller [ 15.826816] usb usb5: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 15.826854] usb usb5: SerialNumber: 0000:00:1d.3 [ 15.826974] hub 5-0:1.0: USB hub found [ 15.827040] hub 5-0:1.0: 2 ports detected [ 15.913020] usb 1-2: New USB device found, idVendor=05e3, idProduct=070e [ 15.913065] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 15.913108] usb 1-2: Product: USB Storage [ 15.913144] usb 1-2: SerialNumber: 000000009317 [ 16.021061] firewire_ohci 0000:03:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 16.033850] Linux video capture interface: v2.00 [ 16.099230] saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 16.099399] saa7133[0]: found at 0000:03:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xe1605000 [ 16.099460] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected] [ 16.099528] saa7133[0]: board init: gpio is 600c000 [ 16.190082] [drm:i915_dump_device_info] i915 device info: gen=4, pciid=0x2e32 rev=0x03 flags=need_gfx_hws,is_g4x,has_pipe_cxsr,has_hotplug, [ 16.190109] [drm:intel_detect_pch] No PCH found. [ 16.190112] [drm] Memory usable by graphics device = 2048M [ 16.190153] [drm:i915_gem_gtt_init] GMADR size = 256M [ 16.190154] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 16.190155] [drm:i915_gem_gtt_init] ppgtt mode: 0 [ 16.190156] [drm] Replacing VGA console driver [ 16.190687] Console: switching to colour dummy device 80x25 [ 16.191130] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbdce0800 [ 16.191139] [drm:intel_opregion_setup] SWSCI supported [ 16.197015] [drm:swsci_setup] SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000001) [ 16.197017] [drm:swsci_setup] SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241 [ 16.197039] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 16.197045] [drm] Driver supports precise vblank timestamp query. [ 16.197049] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 16.197052] [drm:validate_vbt] Using VBT from OpRegion: $VBT EAGLELAKE d [ 16.197055] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 16.197057] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 16.197060] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 16.197063] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 16.197065] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 16.197066] [drm:parse_driver_features] DRRS State Enabled:0 [ 16.197077] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 16.197086] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at be000000 [ 16.197088] [drm:intel_display_power_get] enabling always-on [ 16.197109] [drm:intel_modeset_init] 2 display pipes available. [ 16.197115] [drm:intel_modeset_init] pipe A sprite A init failed: -19 [ 16.197120] [drm:intel_modeset_init] pipe B sprite B init failed: -19 [ 16.197124] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 16.197486] [drm:intel_setup_outputs] probing SDVOB [ 16.197489] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 16.197771] [drm:intel_sdvo_read_byte] i2c transfer returned -6 [ 16.197773] [drm:intel_sdvo_init] No SDVO device found on SDVOB [ 16.197796] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 16.197798] [drm:intel_setup_outputs] probing HDMI on SDVOB [ 16.197847] [drm:intel_dp_init_connector] Adding DP connector on port B [ 16.197879] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 16.197897] [drm:intel_setup_outputs] probing SDVOC [ 16.197898] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 16.198189] [drm:intel_sdvo_read_byte] i2c transfer returned -6 [ 16.198190] [drm:intel_sdvo_init] No SDVO device found on SDVOC [ 16.198204] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 16.198209] [drm:intel_setup_outputs] probing HDMI on SDVOC [ 16.198238] [drm:intel_dp_init_connector] Adding DP connector on port C [ 16.198263] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2 [ 16.198287] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: enabled [ 16.198288] [drm:intel_modeset_readout_hw_state] [CRTC:10] hw state readout: disabled [ 16.198290] [drm:intel_modeset_readout_hw_state] [ENCODER:12:DAC-12] hw state readout: disabled, pipe A [ 16.198293] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A [ 16.198294] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A [ 16.198296] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A [ 16.198298] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A [ 16.198300] [drm:intel_modeset_readout_hw_state] [CONNECTOR:11:VGA-1] hw state readout: disabled [ 16.198301] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:HDMI-A-1] hw state readout: enabled [ 16.198303] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:DP-1] hw state readout: disabled [ 16.198304] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:HDMI-A-2] hw state readout: disabled [ 16.198306] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-2] hw state readout: disabled [ 16.198309] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe A [ 16.198310] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 16.198311] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 16.198313] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.198314] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.198315] [drm:intel_dump_pipe_config] requested mode: [ 16.198317] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0 [ 16.198318] [drm:intel_dump_pipe_config] adjusted mode: [ 16.198320] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5 [ 16.198322] [drm:intel_dump_crtc_timings] crtc timings: 25200 640 656 752 800 400 450 452 525, type: 0x0 flags: 0x5 [ 16.198326] [drm:intel_dump_pipe_config] port clock: 25200 [ 16.198327] [drm:intel_dump_pipe_config] pipe src size: 640x400 [ 16.198329] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.198330] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 16.198331] [drm:intel_dump_pipe_config] ips: 0 [ 16.198332] [drm:intel_dump_pipe_config] double wide: 0 [ 16.198335] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 16.198336] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 16.198338] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 16.198339] [drm:intel_dump_pipe_config] [CRTC:10][setup_hw_state] config for pipe B [ 16.198340] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 16.198341] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 16.198343] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.198344] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.198345] [drm:intel_dump_pipe_config] requested mode: [ 16.198347] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 16.198348] [drm:intel_dump_pipe_config] adjusted mode: [ 16.198350] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 16.198352] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 16.198353] [drm:intel_dump_pipe_config] port clock: 0 [ 16.198354] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 16.198355] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.198356] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 16.198357] [drm:intel_dump_pipe_config] ips: 0 [ 16.198358] [drm:intel_dump_pipe_config] double wide: 0 [ 16.198360] [drm:intel_connector_check_state] [CONNECTOR:14:HDMI-A-1] [ 16.198363] [drm:check_encoder_state] [ENCODER:12:DAC-12] [ 16.198364] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 16.198365] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 16.198367] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 16.198368] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 16.198370] [drm:check_crtc_state] [CRTC:7] [ 16.198374] [drm:check_crtc_state] [CRTC:10] [ 16.198379] [drm:i9xx_get_plane_config] pipe/plane 0/0 with fb: size=640x400@16, offset=0, pitch 1536, size 0x96000 [ 16.198380] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=96000 [ 16.198384] [drm:i915_pages_create_for_stolen] offset=0x0, size=614400 [ 16.198387] [drm:intel_alloc_plane_obj] plane fb obj ffff880231766000 [ 16.198389] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 96000 [ 16.198391] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [96000, 7ffff000] [ 16.200360] [drm:i915_gem_context_init] fake context support initialized [ 16.200373] [drm:init_status_page] render ring hws offset: 0x00097000 [ 16.200375] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 16.200377] [drm:i915_pages_create_for_stolen] offset=0x96000, size=131072 [ 16.200400] [drm:init_status_page] bsd ring hws offset: 0x000ba000 [ 16.200402] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 16.200403] [drm:i915_pages_create_for_stolen] offset=0xb6000, size=131072 [ 16.200422] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:11:VGA-1] [ 16.200424] [drm:intel_crt_detect] [CONNECTOR:11:VGA-1] force=1 [ 16.202156] saa7133[0]: i2c eeprom read error (err=-5) [ 16.212011] [drm:intel_crt_detect] CRT not detected via hotplug [ 16.213012] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 16.213014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 16.213015] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 16.213017] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 16.213278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 16.213280] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 16.213281] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 16.213283] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:11:VGA-1] disconnected [ 16.213285] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:HDMI-A-1] [ 16.213287] [drm:intel_hdmi_detect] [CONNECTOR:14:HDMI-A-1] [ 16.254012] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 16.295065] [drm:drm_edid_to_eld] ELD monitor E2250 [ 16.295068] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 16.295070] [drm:drm_edid_to_eld] ELD size 7, SAD count 1 [ 16.295089] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:HDMI-A-1] probed modes : [ 16.295092] [drm:drm_mode_debug_printmodeline] Modeline 26:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.295095] [drm:drm_mode_debug_printmodeline] Modeline 48:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 16.295098] [drm:drm_mode_debug_printmodeline] Modeline 28:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 16.295101] [drm:drm_mode_debug_printmodeline] Modeline 50:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 16.295104] [drm:drm_mode_debug_printmodeline] Modeline 45:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 16.295107] [drm:drm_mode_debug_printmodeline] Modeline 42:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 16.295110] [drm:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 16.295112] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 16.295115] [drm:drm_mode_debug_printmodeline] Modeline 33:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 16.295118] [drm:drm_mode_debug_printmodeline] Modeline 31:"1152x864" 60 81579 1152 1216 1336 1520 864 865 868 895 0x0 0x6 [ 16.295121] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 16.295124] [drm:drm_mode_debug_printmodeline] Modeline 51:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 16.295127] [drm:drm_mode_debug_printmodeline] Modeline 47:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 16.295129] [drm:drm_mode_debug_printmodeline] Modeline 37:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 16.295132] [drm:drm_mode_debug_printmodeline] Modeline 35:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 16.295135] [drm:drm_mode_debug_printmodeline] Modeline 43:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 16.295138] [drm:drm_mode_debug_printmodeline] Modeline 52:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 16.295140] [drm:drm_mode_debug_printmodeline] Modeline 30:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 16.295143] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 16.295146] [drm:drm_mode_debug_printmodeline] Modeline 41:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 16.295148] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] [ 16.295151] [drm:intel_dp_detect] [CONNECTOR:19:DP-1] [ 16.295153] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected [ 16.295155] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] [ 16.295157] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 16.296016] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 16.296018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 16.296020] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] disconnected [ 16.296022] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] [ 16.296023] [drm:intel_dp_detect] [CONNECTOR:23:DP-2] [ 16.296025] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected [ 16.296027] [drm:drm_setup_crtcs] [ 16.296029] [drm:drm_enable_connectors] connector 11 enabled? no [ 16.296031] [drm:drm_enable_connectors] connector 14 enabled? yes [ 16.296032] [drm:drm_enable_connectors] connector 19 enabled? no [ 16.296034] [drm:drm_enable_connectors] connector 21 enabled? no [ 16.296035] [drm:drm_enable_connectors] connector 23 enabled? no [ 16.296037] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 16.296039] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-1 [ 16.296040] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-1 [ 16.296043] [drm:intel_fb_initial_config] connector HDMI-A-1 on pipe A [CRTC:7]: 1920x1080 [ 16.296044] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 16.296045] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 16.296047] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 16.296048] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 7 [ 16.296051] [drm:intelfb_create] no BIOS fb, allocating a new one [ 16.296053] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 16.296056] [drm:i915_pages_create_for_stolen] offset=0xd6000, size=8294400 [ 16.297427] [drm:intelfb_create] allocated 1920x1080 fb: 0x000dc000, bo ffff8802317668c0 [ 16.297496] fbcon: inteldrmfb (fb0) is primary device [ 16.297553] [drm:intel_crtc_set_config] [CRTC:7] [FB:38] #connectors=1 (x y) (0 0) [ 16.297555] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 16.297557] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 16.297559] [drm:drm_mode_debug_printmodeline] Modeline 27:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.297560] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0 [ 16.297561] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 16.297564] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 16.297566] [drm:connected_sink_compute_bpp] [CONNECTOR:14:HDMI-A-1] checking for sink bpp constrains [ 16.297568] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output [ 16.297568] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI [ 16.297570] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 16.297571] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A [ 16.297572] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 16.297573] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 16.297574] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.297575] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.297576] [drm:intel_dump_pipe_config] requested mode: [ 16.297578] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.297578] [drm:intel_dump_pipe_config] adjusted mode: [ 16.297580] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.297582] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 16.297583] [drm:intel_dump_pipe_config] port clock: 148500 [ 16.297584] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 16.297585] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.297586] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 16.297586] [drm:intel_dump_pipe_config] ips: 0 [ 16.297587] [drm:intel_dump_pipe_config] double wide: 0 [ 16.297589] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 16.311439] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000 [ 16.311440] [drm:intel_hpd_irq_handler] digital hpd port 2 1 [ 16.311441] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 16.311455] [drm:intel_dp_hpd_pulse] got hpd irq on port 2 - long [ 16.326021] tuner 9-004b: Tuner -1 found with type(s) Radio TV. [ 16.331027] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 16.331030] [drm:g4x_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 16.331071] [drm:i9xx_set_pipeconf] disabling CxSR downclocking [ 16.331075] [drm:i9xx_update_primary_plane] Writing base 000DC000 00000000 0 0 7680 [ 16.331078] [drm:intel_hdmi_prepare] Enabling HDMI audio on pipe A [ 16.331080] [drm:intel_write_eld] ELD on [CONNECTOR:14:HDMI-A-1], [ENCODER:13:TMDS-13] [ 16.331082] [drm:g4x_write_eld] ELD size 7 [ 16.331747] [drm:g4x_check_srwm] SR watermark: display plane 114, cursor 2 [ 16.331748] [drm:g4x_check_srwm] display watermark is too large(114/63), disabling [ 16.331749] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 16.331750] [drm:g4x_update_wm] Setting FIFO watermarks - A: plane=49, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 16.331759] [drm:intel_connector_check_state] [CONNECTOR:14:HDMI-A-1] [ 16.331762] [drm:check_encoder_state] [ENCODER:12:DAC-12] [ 16.331763] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 16.331765] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 16.331766] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 16.331768] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 16.331770] [drm:check_crtc_state] [CRTC:7] [ 16.331776] [drm:intel_pipe_config_compare] *ERROR* mismatch in limited_color_range (expected 1, found 0) [ 16.331776] ------------[ cut here ]------------ [ 16.331808] WARNING: CPU: 2 PID: 161 at drivers/gpu/drm/i915/intel_display.c:10659 check_crtc_state+0x7e3/0xe50 [i915]() [ 16.331809] pipe state doesn't match! [ 16.331819] Modules linked in: tda8290 tuner i915(+) saa7134(+) tveeprom videobuf2_dma_sg videobuf2_memops videobuf2_core rc_core v4l2_common videodev cfbfillrect cfbimgblt cfbcopyarea drm_kms_helper firewire_ohci firewire_core uhci_hcd evdev ehci_pci ehci_hcd [ 16.331821] CPU: 2 PID: 161 Comm: modprobe Not tainted 3.17.0-rc4+ #322 [ 16.331822] Hardware name: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009 [ 16.331824] 0000000000000009 ffffffff8145a016 ffff8800b9bd73c0 ffffffff81040d0d [ 16.331825] ffff88023621f060 ffff8800b9bd7410 0000000000000001 ffff88023621f708 [ 16.331827] ffff8802317c0338 ffffffff81040d77 ffffffffa0209529 ffffffff00000018 [ 16.331828] Call Trace: [ 16.331833] [<ffffffff8145a016>] ? dump_stack+0x49/0x6a [ 16.331836] [<ffffffff81040d0d>] ? warn_slowpath_common+0x6d/0x90 [ 16.331838] [<ffffffff81040d77>] ? warn_slowpath_fmt+0x47/0x50 [ 16.331858] [<ffffffffa01a5d03>] ? check_crtc_state+0x7e3/0xe50 [i915] [ 16.331879] [<ffffffffa01b3c81>] ? intel_modeset_check_state+0x1f1/0x760 [i915] [ 16.331899] [<ffffffffa01b427d>] ? intel_set_mode+0x1d/0x30 [i915] [ 16.331923] [<ffffffffa01b534b>] ? intel_crtc_set_config+0xaab/0xe90 [i915] [ 16.331926] [<ffffffff811eba9b>] ? get_from_free_list+0x3b/0x50 [ 16.331929] [<ffffffff812a1b6d>] ? drm_mode_set_config_internal+0x5d/0xe0 [ 16.331933] [<ffffffffa00c0eec>] ? restore_fbdev_mode+0xac/0xd0 [drm_kms_helper] [ 16.331935] [<ffffffffa00c0f29>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x19/0x30 [drm_kms_helper] [ 16.331938] [<ffffffffa00c2f8d>] ? drm_fb_helper_set_par+0x1d/0x60 [drm_kms_helper] [ 16.331958] [<ffffffffa01bfb61>] ? intel_fbdev_set_par+0x11/0x60 [i915] [ 16.331960] [<ffffffff81227720>] ? fbcon_init+0x5e0/0x670 [ 16.331963] [<ffffffff8127a66c>] ? visual_init+0xac/0x110 [ 16.331964] [<ffffffff8127c930>] ? do_bind_con_driver+0x170/0x410 [ 16.331966] [<ffffffff8127d153>] ? do_take_over_console+0xa3/0x190 [ 16.331967] [<ffffffff81227803>] ? do_fbcon_takeover+0x53/0xb0 [ 16.331970] [<ffffffff81059e35>] ? notifier_call_chain+0x45/0x70 [ 16.331972] [<ffffffff8105a12c>] ? __blocking_notifier_call_chain+0x3c/0x60 [ 16.331974] [<ffffffff8122f5d6>] ? register_framebuffer+0x1f6/0x320 [ 16.331976] [<ffffffffa00c2dcd>] ? drm_fb_helper_initial_config+0x36d/0x510 [drm_kms_helper] [ 16.331995] [<ffffffffa01984f7>] ? gen4_read32+0x37/0x40 [i915] [ 16.332009] [<ffffffffa01e3f20>] ? i915_driver_load+0xfd0/0x1030 [i915] [ 16.332029] [<ffffffff8129bf4c>] ? drm_dev_register+0x9c/0xf0 [ 16.332031] [<ffffffff8129e533>] ? drm_get_pci_dev+0xc3/0x1e0 [ 16.332034] [<ffffffff81213ee0>] ? pci_device_probe+0x60/0xb0 [ 16.332036] [<ffffffff812b7a9a>] ? really_probe+0x5a/0x220 [ 16.332037] [<ffffffff812b7d21>] ? __driver_attach+0x81/0x90 [ 16.332038] [<ffffffff812b7ca0>] ? __device_attach+0x40/0x40 [ 16.332040] [<ffffffff812b5e4b>] ? bus_for_each_dev+0x5b/0x90 [ 16.332041] [<ffffffff812b7310>] ? bus_add_driver+0x160/0x210 [ 16.332043] [<ffffffffa0222000>] ? 0xffffffffa0222000 [ 16.332044] [<ffffffff812b8326>] ? driver_register+0x56/0xe0 [ 16.332046] [<ffffffff810002b4>] ? do_one_initcall+0x84/0x1b0 [ 16.332049] [<ffffffff8109f11f>] ? load_module+0x1b5f/0x2150 [ 16.332051] [<ffffffff8109c090>] ? store_uevent+0x40/0x40 [ 16.332053] [<ffffffff8109f7a1>] ? SyS_init_module+0x91/0xc0 [ 16.332056] [<ffffffff81460a21>] ? sysenter_dispatch+0x7/0x1e [ 16.332057] ---[ end trace f39c85dc9dc2a812 ]--- [ 16.332058] [drm:intel_dump_pipe_config] [CRTC:7][hw state] config for pipe A [ 16.332059] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 16.332060] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 16.332061] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.332062] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.332063] [drm:intel_dump_pipe_config] requested mode: [ 16.332065] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 16.332065] [drm:intel_dump_pipe_config] adjusted mode: [ 16.332067] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5 [ 16.332069] [drm:intel_dump_crtc_timings] crtc timings: 148800 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x0 flags: 0x5 [ 16.332070] [drm:intel_dump_pipe_config] port clock: 148800 [ 16.332071] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 16.332072] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.332073] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 16.332073] [drm:intel_dump_pipe_config] ips: 0 [ 16.332078] [drm:intel_dump_pipe_config] double wide: 0 [ 16.332079] [drm:intel_dump_pipe_config] [CRTC:7][sw state] config for pipe A [ 16.332079] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 16.332080] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 16.332082] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.332083] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.332083] [drm:intel_dump_pipe_config] requested mode: [ 16.332085] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.332086] [drm:intel_dump_pipe_config] adjusted mode: [ 16.332088] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.332089] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 16.332090] [drm:intel_dump_pipe_config] port clock: 148500 [ 16.332091] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 16.332092] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.332093] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 16.332093] [drm:intel_dump_pipe_config] ips: 0 [ 16.332094] [drm:intel_dump_pipe_config] double wide: 0 [ 16.332095] [drm:check_crtc_state] [CRTC:10] [ 16.332099] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 16.332100] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 16.332102] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 16.332111] Console: switching to colour frame buffer device 240x67 [ 16.332121] [drm:intel_crtc_set_config] [CRTC:7] [FB:38] #connectors=1 (x y) (0 0) [ 16.332123] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 16.332124] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 16.333927] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 16.333930] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 16.333931] [drm:i915_hotplug_work_func] Connector DP-2 (pin 5) received hotplug event. [ 16.333933] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 16.335023] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 16.335024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 16.335027] [drm:intel_dp_detect] [CONNECTOR:23:DP-2] [ 16.355783] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 16.357093] i915 0000:00:02.0: registered panic notifier [ 16.363014] tda829x 9-004b: setting tuner address to 61 [ 16.363083] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0 [ 16.522105] firewire_core 0000:03:07.0: created device fw0: GUID 00201c56006cf049, S400 [ 16.526036] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 16.691699] usb 5-1: New USB device found, idVendor=046d, idProduct=c517 [ 16.693168] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 16.694561] usb 5-1: Product: USB Receiver [ 16.695910] usb 5-1: Manufacturer: Logitech [ 16.714013] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C517.0001/input/input5 [ 16.715410] logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-1/input0 [ 16.748734] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 16.750736] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:046D:C517.0002/input/input6 [ 16.752189] logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1/input1 [ 16.873028] tda829x 9-004b: type set to tda8290+75a [ 16.959025] usb 5-2: new full-speed USB device number 3 using uhci_hcd [ 17.122699] usb 5-2: New USB device found, idVendor=1130, idProduct=1620 [ 17.124054] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 17.125300] usb 5-2: Product: USB AUDIO [ 17.132751] input: USB AUDIO as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.2/0003:1130:1620.0003/input/input7 [ 17.134092] hid-generic 0003:1130:1620.0003: input: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:1d.3-2/input2 [ 17.600514] usb-storage 1-2:1.0: USB Mass Storage device detected [ 17.601990] scsi host2: usb-storage 1-2:1.0 [ 17.603363] usbcore: registered new interface driver usb-storage [ 17.694702] usb 5-2: Warning! Unlikely big volume range (=17152), cval->res is probably wrong. [ 17.696048] usb 5-2: [2] FU [PCM Playback Volume] ch = 2, val = 0/17152/1 [ 17.697617] usbcore: registered new interface driver snd-usb-audio [ 18.605162] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 18.606672] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 18.609276] scsi 2:0:0:1: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 18.610747] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 18.614156] scsi 2:0:0:2: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 18.615659] sd 2:0:0:2: Attached scsi generic sg5 type 0 [ 18.619653] scsi 2:0:0:3: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 18.621207] sd 2:0:0:3: Attached scsi generic sg6 type 0 [ 18.626907] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 18.632155] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 18.635527] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 18.637033] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 19.882013] IR keymap rc-pinnacle-color not found [ 19.883357] Registered IR keymap rc-empty [ 19.884720] input: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0/input8 [ 19.886171] rc0: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0 [ 19.887513] ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-9/9-0047/ir0 [saa7133[0]] [ 19.923088] saa7133[0]: registered device video0 [v4l2] [ 19.924498] saa7133[0]: registered device vbi0 [ 19.925835] saa7133[0]: registered device radio0 [ 19.976401] dvb_init() allocating 1 frontend [ 19.992019] DVB: registering new adapter (saa7133[0]) [ 19.993364] saa7134 0000:03:01.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 20.027010] tda1004x: setting up plls for 48MHz sampling clock [ 20.189010] tda1004x: found firmware revision 20 -- ok [ 20.361263] saa7134 ALSA driver for DMA sound loaded [ 20.362690] saa7133[0]/alsa: saa7133[0] at 0xe1605000 irq 19 registered as card -1 [ 23.273152] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07 [ 23.274147] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28 [ 23.281468] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07 [ 23.282464] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 [ 23.289593] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07 [ 23.290589] microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28 [ 23.297836] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07 [ 23.298003] microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28 [ 24.089261] kjournald starting. Commit interval 5 seconds [ 24.089281] EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [ 24.089532] EXT3-fs (sda5): using internal journal [ 24.089534] EXT3-fs (sda5): recovery complete [ 24.089535] EXT3-fs (sda5): mounted filesystem with writeback data mode [ 26.459925] kjournald starting. Commit interval 5 seconds [ 26.459958] EXT3-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended [ 26.461398] EXT3-fs (sda9): using internal journal [ 26.505171] EXT3-fs (sda9): recovery complete [ 26.506599] EXT3-fs (sda9): mounted filesystem with writeback data mode [ 26.625848] kjournald starting. Commit interval 5 seconds [ 26.625863] EXT3-fs (sda10): warning: maximal mount count reached, running e2fsck is recommended [ 26.626101] EXT3-fs (sda10): using internal journal [ 26.673147] EXT3-fs (sda10): recovery complete [ 26.674583] EXT3-fs (sda10): mounted filesystem with writeback data mode [ 26.742442] Adding 7815584k swap on /dev/sda11. Priority:-1 extents:1 across:7815584k [ 27.208321] r8169 0000:02:00.0 eth0: link down [ 27.209572] r8169 0000:02:00.0 eth0: link down [ 28.956717] r8169 0000:02:00.0 eth0: link up [ 29.980346] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 57.899273] [drm:i915_gem_open] [ 57.899326] [drm:intel_crtc_set_config] [CRTC:7] [FB:38] #connectors=1 (x y) (0 0) [ 57.899331] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 57.899333] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 57.899335] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 57.899336] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 57.899338] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 59.502428] [drm:intel_crtc_set_config] [CRTC:7] [FB:38] #connectors=1 (x y) (0 0) [ 59.502432] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 59.502434] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 59.507507] [drm:i915_gem_open] [ 59.507519] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 59.575074] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 59.575093] [drm:drm_mode_addfb] [FB:39] [ 59.575351] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 59.575354] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 59.575396] [drm:drm_mode_getconnector] [CONNECTOR:11:?] [ 59.575411] [drm:drm_mode_getconnector] [CONNECTOR:11:?] [ 59.575445] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 59.575452] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 59.575488] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 59.575492] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 59.575518] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 59.575523] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 59.575550] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 59.575554] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 60.960488] [drm:drm_mode_addfb] [FB:39] [ 60.960784] [drm:drm_mode_setcrtc] [CRTC:7] [ 60.960788] [drm:drm_mode_setcrtc] [CONNECTOR:14:HDMI-A-1] [ 60.960791] [drm:intel_crtc_set_config] [CRTC:7] [FB:39] #connectors=1 (x y) (0 0) [ 60.960794] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=1 [ 60.960796] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 60.963774] [drm:i9xx_update_primary_plane] Writing base 008E5000 00000000 0 0 7680 [ 60.975025] [drm:drm_mode_setcrtc] [CRTC:10] [ 60.975027] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 60.975029] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 60.975031] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 64.691186] [drm:add_framebuffer_internal] [FB:40] [ 64.691196] [drm:g4x_check_srwm] SR watermark: display plane 114, cursor 6 [ 64.691197] [drm:g4x_check_srwm] display watermark is too large(114/63), disabling [ 64.691199] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 64.691201] [drm:g4x_update_wm] Setting FIFO watermarks - A: plane=49, cursor=6, B: plane=2, cursor=2, SR: plane=0, cursor=0 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
