From now on for both DSI Ports A & C, the seq_port value has been set to 0. seq_port value is parsed from Sequence block#53 of VBT. So, for packets that needs to be read/write for DSI single link on Port A and Port C will now be based on the DVO port from VBT block 2, instead of seq_port.
Signed-off-by: Gaurav K Singh <[email protected]> Reviewed-by: Jani Nikula <[email protected]> --- drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c index f8c2269..5493aef 100644 --- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c +++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c @@ -110,7 +110,15 @@ static u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi, u8 *data) vc = (byte >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 0x3; seq_port = (byte >> MIPI_PORT_SHIFT) & 0x3; - port = intel_dsi_seq_port_to_port(seq_port); + /* For DSI single link on Port A & C, the seq_port value which is + * parsed from Sequence Block#53 of VBT has been set to 0 + * Now, read/write of packets for the DSI single link on Port A and + * Port C will based on the DVO port from VBT block 2. + */ + if (intel_dsi->ports == (1 << PORT_C)) + port = PORT_C; + else + port = intel_dsi_seq_port_to_port(seq_port); /* LP or HS mode */ intel_dsi->hs = mode; -- 1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
