Move the DPCD read to the top and check for an interrupt from the sink to catch Displayport automated testing requests necessary to support Displayport compliance testing. The checks for active connectors and link status are moved below the check for the interrupt.
Adds a check at the top to verify that the device is connected. This is necessary for DP compliance testing to ensure that test requests are captured and acknowledged. If a test request is present during a connected->disconnected transition, the test code will attempt to execute even though the connection has been disabled, resulting in a faied test. Signed-off-by: Todd Previte <[email protected]> --- drivers/gpu/drm/i915/intel_dp.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 3dc92a3..1b452cc 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3890,21 +3890,14 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); - if (!intel_encoder->connectors_active) - return; - - if (WARN_ON(!intel_encoder->base.crtc)) - return; - - if (!to_intel_crtc(intel_encoder->base.crtc)->active) - return; - - /* Try to read receiver status if the link appears to be up */ - if (!intel_dp_get_link_status(intel_dp, link_status)) { + /* Bail if not connected */ + if (intel_dp->attached_connector->base.status != + connector_status_connected) { + DRM_DEBUG_KMS("Not connected\n"); return; } - /* Now read the DPCD to see if it's actually running */ + /* Attempt to read the DPCD */ if (!intel_dp_get_dpcd(intel_dp)) { return; } @@ -3916,13 +3909,26 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) drm_dp_dpcd_writeb(&intel_dp->aux, DP_DEVICE_SERVICE_IRQ_VECTOR, sink_irq_vector); - if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST) intel_dp_handle_test_request(intel_dp); if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ)) DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n"); } + if (!intel_encoder->connectors_active) + return; + + if (WARN_ON(!intel_encoder->base.crtc)) + return; + + if (!to_intel_crtc(intel_encoder->base.crtc)->active) + return; + + /* Try to read receiver status if the link appears to be up */ + if (!intel_dp_get_link_status(intel_dp, link_status)) { + return; + } + if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) { DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n", intel_encoder->base.name); -- 1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
