Signed-off-by: Damien Lespiau <[email protected]>
---
drivers/gpu/drm/i915/i915_drv.h | 2 +-
drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++---------
drivers/gpu/drm/i915/intel_ddi.c | 26 +++++++++++++-------------
drivers/gpu/drm/i915/intel_display.c | 6 +++---
drivers/gpu/drm/i915/intel_dp.c | 12 ++++++------
5 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e8e8145..908c124 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -295,7 +295,7 @@ struct intel_dpll_hw_state {
/* skl */
/*
* DPLL_CTRL1 has 6 bits for each each this DPLL. We store those in
- * lower part of crtl1 and they get shifted into position when writing
+ * lower part of ctrl1 and they get shifted into position when writing
* the register. This allows us to easily compare the state to share
* the DPLL.
*/
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e35d7f2..cebb614 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7135,16 +7135,16 @@ enum skl_disp_power_wells {
#define DPLL_CTRL1 0x6C058
#define DPLL_CTRL1_HDMI_MODE(id) (1<<((id)*6+5))
#define DPLL_CTRL1_SSC(id) (1<<((id)*6+4))
-#define DPLL_CRTL1_LINK_RATE_MASK(id) (7<<((id)*6+1))
-#define DPLL_CRTL1_LINK_RATE_SHIFT(id) ((id)*6+1)
-#define DPLL_CRTL1_LINK_RATE(linkrate, id) ((linkrate)<<((id)*6+1))
+#define DPLL_CTRL1_LINK_RATE_MASK(id) (7<<((id)*6+1))
+#define DPLL_CTRL1_LINK_RATE_SHIFT(id) ((id)*6+1)
+#define DPLL_CTRL1_LINK_RATE(linkrate, id) ((linkrate)<<((id)*6+1))
#define DPLL_CTRL1_OVERRIDE(id) (1<<((id)*6))
-#define DPLL_CRTL1_LINK_RATE_2700 0
-#define DPLL_CRTL1_LINK_RATE_1350 1
-#define DPLL_CRTL1_LINK_RATE_810 2
-#define DPLL_CRTL1_LINK_RATE_1620 3
-#define DPLL_CRTL1_LINK_RATE_1080 4
-#define DPLL_CRTL1_LINK_RATE_2160 5
+#define DPLL_CTRL1_LINK_RATE_2700 0
+#define DPLL_CTRL1_LINK_RATE_1350 1
+#define DPLL_CTRL1_LINK_RATE_810 2
+#define DPLL_CTRL1_LINK_RATE_1620 3
+#define DPLL_CTRL1_LINK_RATE_1080 4
+#define DPLL_CTRL1_LINK_RATE_2160 5
/* DPLL control2 */
#define DPLL_CTRL2 0x6C05C
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 9c1e74a..d5bee8b 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -870,26 +870,26 @@ static void skl_ddi_clock_get(struct intel_encoder
*encoder,
if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(dpll)) {
link_clock = skl_calc_wrpll_link(dev_priv, dpll);
} else {
- link_clock = dpll_ctl1 & DPLL_CRTL1_LINK_RATE_MASK(dpll);
- link_clock >>= DPLL_CRTL1_LINK_RATE_SHIFT(dpll);
+ link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(dpll);
+ link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(dpll);
switch (link_clock) {
- case DPLL_CRTL1_LINK_RATE_810:
+ case DPLL_CTRL1_LINK_RATE_810:
link_clock = 81000;
break;
- case DPLL_CRTL1_LINK_RATE_1080:
+ case DPLL_CTRL1_LINK_RATE_1080:
link_clock = 108000;
break;
- case DPLL_CRTL1_LINK_RATE_1350:
+ case DPLL_CTRL1_LINK_RATE_1350:
link_clock = 135000;
break;
- case DPLL_CRTL1_LINK_RATE_1620:
+ case DPLL_CTRL1_LINK_RATE_1620:
link_clock = 162000;
break;
- case DPLL_CRTL1_LINK_RATE_2160:
+ case DPLL_CTRL1_LINK_RATE_2160:
link_clock = 216000;
break;
- case DPLL_CRTL1_LINK_RATE_2700:
+ case DPLL_CTRL1_LINK_RATE_2700:
link_clock = 270000;
break;
default:
@@ -1294,13 +1294,13 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
switch (intel_dp->link_bw) {
case DP_LINK_BW_1_62:
- ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810,
0);
+ ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
0);
break;
case DP_LINK_BW_2_7:
- ctrl1 |=
DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350, 0);
+ ctrl1 |=
DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, 0);
break;
case DP_LINK_BW_5_4:
- ctrl1 |=
DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700, 0);
+ ctrl1 |=
DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0);
break;
}
@@ -1854,7 +1854,7 @@ static void intel_ddi_pre_enable(struct intel_encoder
*intel_encoder)
val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) |
DPLL_CTRL1_SSC(dpll) |
- DPLL_CRTL1_LINK_RATE_MASK(dpll));
+ DPLL_CTRL1_LINK_RATE_MASK(dpll));
val |= crtc->config->dpll_hw_state.ctrl1 << (dpll * 6);
I915_WRITE(DPLL_CTRL1, val);
@@ -2100,7 +2100,7 @@ static void skl_ddi_pll_enable(struct drm_i915_private
*dev_priv,
val = I915_READ(DPLL_CTRL1);
val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) | DPLL_CTRL1_SSC(dpll) |
- DPLL_CRTL1_LINK_RATE_MASK(dpll));
+ DPLL_CTRL1_LINK_RATE_MASK(dpll));
val |= pll->config.hw_state.ctrl1 << (dpll * 6);
I915_WRITE(DPLL_CTRL1, val);
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 3094b08..f2f4ad5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6383,10 +6383,10 @@ static int skylake_get_display_clock_speed(struct
drm_device *dev)
return 540000;
linkrate = (I915_READ(DPLL_CTRL1) &
- DPLL_CRTL1_LINK_RATE_MASK(SKL_DPLL0)) >> 1;
+ DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) >> 1;
- if (linkrate == DPLL_CRTL1_LINK_RATE_2160 ||
- linkrate == DPLL_CRTL1_LINK_RATE_1080) {
+ if (linkrate == DPLL_CTRL1_LINK_RATE_2160 ||
+ linkrate == DPLL_CTRL1_LINK_RATE_1080) {
/* vco 8640 */
switch (cdctl & CDCLK_FREQ_SEL_MASK) {
case CDCLK_FREQ_450_432:
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 937ba31..a2b8f02 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1098,30 +1098,30 @@ skl_edp_set_pll_config(struct intel_crtc_state
*pipe_config, int link_clock)
ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
switch (link_clock / 2) {
case 81000:
- ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810,
+ ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
SKL_DPLL0);
break;
case 135000:
- ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350,
+ ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350,
SKL_DPLL0);
break;
case 270000:
- ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700,
+ ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700,
SKL_DPLL0);
break;
case 162000:
- ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1620,
+ ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620,
SKL_DPLL0);
break;
/* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is 8640 which
results in CDCLK change. Need to handle the change of CDCLK by
disabling pipes and re-enabling them */
case 108000:
- ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1080,
+ ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
SKL_DPLL0);
break;
case 216000:
- ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2160,
+ ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160,
SKL_DPLL0);
break;
--
2.1.0
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
