Summary We covered 5 platforms: Skylake, Braswell, Broadwell, Haswell, Baytrail. In this test circle, 3 new bugs have been found in manual testing and 1 new bug has been found in nightly testing. 90675<https://bugs.freedesktop.org/show_bug.cgi?id=90675> - [SKL ]Dpy_misc_s3d fails 90640<https://bugs.freedesktop.org/show_bug.cgi?id=90640> - [BSW bisected] GPU device didn't increased to the largest frequency 90625<https://bugs.freedesktop.org/show_bug.cgi?id=90625> - [BSW bisected] "testdisplay -d 32" core dump
Test Environment Kernel version: drm-intel-testing-2015-05-22 commit 62115e0dd5e7272ac28fe3549ea3e93f45d5c1a4 Quality Status Platform Status SKL 90675<https://bugs.freedesktop.org/show_bug.cgi?id=90675> - [SKL ]Dpy_misc_s3d fails 89792<https://bugs.freedesktop.org/show_bug.cgi?id=89792> - [BYT/BSW/SKL Debugfs] cat /sys/kernel/debug/dri/0/i915_sr_status showing self-refresh: disabled 89055<https://bugs.freedesktop.org/show_bug.cgi?id=89055> [SKL mobile]"testdisplay -a "case causes Call Trace "at drivers/gpu/drm/i915/intel_pm.c" Fixed bug: 89596<https://bugs.freedesktop.org/show_bug.cgi?id=89596> - [SKL]System output "ERROR" when it resumes from S4 connecting DP monitor BSW QA upgrades BIOS to V69 that fixed eDP issues of V68.1.. With V69 BIOS, BSW becomes more stable than V59. 2 new bug reported and 6 bugs fixed. 90640<https://bugs.freedesktop.org/show_bug.cgi?id=90640> - [BSW bisected] GPU device didn't increased to the largest frequency 90625<https://bugs.freedesktop.org/show_bug.cgi?id=90625> - [BSW bisected] "testdisplay -d 32" core dump 90396<https://bugs.freedesktop.org/show_bug.cgi?id=90396> - [HSW/BDW/BSW] monitors are all black screen after xinit + S3 when the monitors contain eDP and DP 86684<https://bugs.freedesktop.org/show_bug.cgi?id=86684> - [BYT/BSW] igt/kms_psr_sink_crc subcases fail after PSR is enabled in kernel 89832<https://bugs.freedesktop.org/show_bug.cgi?id=89832> - [BSW] "testdisplay -a" shows black for some modes on ASUS PA238Q 89792<https://bugs.freedesktop.org/show_bug.cgi?id=89792> - [BYT/BSW/SKL Debugfs] cat /sys/kernel/debug/dri/0/i915_sr_status showing self-refresh: disabled 88698<https://bugs.freedesktop.org/show_bug.cgi?id=88698> - [BYT/BSW]HDMI screen flashes on some modes when running "testdisplay -a" 89606<https://bugs.freedesktop.org/show_bug.cgi?id=89606> [BSW] DVI screen is black on some modes when running testdisplay 89605<https://bugs.freedesktop.org/show_bug.cgi?id=89605> [BSW] testdisplay on 3 pipe does not show in one monitor 89585<https://bugs.freedesktop.org/show_bug.cgi?id=89585> - [BSW]HDMI resolution-2560x1440@60Hz can't be lighted up with non-reduced blanking 89461<https://bugs.freedesktop.org/show_bug.cgi?id=89461> - [BSW] replug HDMI/DP cable does not light up screen sometimes 88963<https://bugs.freedesktop.org/show_bug.cgi?id=88963> [BSW] DP screen is black when running testdisplay on some modes Fixed bugs: 90228<https://bugs.freedesktop.org/show_bug.cgi?id=90228> - [BSW] hotplug events floods 90227<https://bugs.freedesktop.org/show_bug.cgi?id=90227> - [BSW bisected] *ERROR* mismatch in has_infoframe (expected 1, found 0) when booting with HDMI monitor connected 90059<https://bugs.freedesktop.org/show_bug.cgi?id=90059> - [BYT/BSW bisected]Start up the machine with HDMI screen causes WARNING 89668<https://bugs.freedesktop.org/show_bug.cgi?id=89668> [BSW] HDMI screen becomes black after replug HDMI cable 89601<https://bugs.freedesktop.org/show_bug.cgi?id=89601> [BSW] Sometimes dmesg shows " *ERROR* EDID checksum is invalid" when connected with HDMI monitor 89600<https://bugs.freedesktop.org/show_bug.cgi?id=89600> [BSW] GPU hangs after S3 + S4 BDW 90625<https://bugs.freedesktop.org/show_bug.cgi?id=90625> - [BSW bisected] "testdisplay -d 32" core dump 90396<https://bugs.freedesktop.org/show_bug.cgi?id=90396> - [HSW/BDW/BSW] monitors are all black screen after xinit + S3 when the monitors contain eDP and DP 90212<https://bugs.freedesktop.org/show_bug.cgi?id=90212> - [BDW-Y bisected] Screen flicker when start X with FBC enable 89439<https://bugs.freedesktop.org/show_bug.cgi?id=89439> - [BDW] xterm disappears on HDMI screen if rotate from left to right after S3 82551<https://bugs.freedesktop.org/show_bug.cgi?id=82551> - [HSW/BDW/SKL mobile] HDMI hot plug sporadically cause ERROR Bug 74102<https://bugs.freedesktop.org/show_bug.cgi?id=74102> - [ILK/SNB/IVB/HSW/BDW]igt/testdisplay causes *ERROR* Pipe A FIFO underrun Fixed bug: 89600<https://bugs.freedesktop.org/show_bug.cgi?id=89600> [BSW] GPU hangs after S3 + S4 BYT 90625<https://bugs.freedesktop.org/show_bug.cgi?id=90625> - [BSW bisected] "testdisplay -d 32" core dump 89792<https://bugs.freedesktop.org/show_bug.cgi?id=89792> - [BYT/BSW/SKL Debugfs] cat /sys/kernel/debug/dri/0/i915_sr_status showing self-refresh: disabled 89401<https://bugs.freedesktop.org/show_bug.cgi?id=89401> - [BYT]Some testdisplay case cause screen flicker on testing branch Fixed bug: 90225<https://bugs.freedesktop.org/show_bug.cgi?id=90225> - [BYT] Testdisplay cause abnormal output in dmesg when HDMI monitor is connected. HSW 90675<https://bugs.freedesktop.org/show_bug.cgi?id=90675> - [SKL ]Dpy_misc_s3d fails 90625<https://bugs.freedesktop.org/show_bug.cgi?id=90625> - [BSW bisected] "testdisplay -d 32" core dump 90396<https://bugs.freedesktop.org/show_bug.cgi?id=90396> - [HSW/BDW/BSW] monitors are all black screen after xinit + S3 when the monitors contain eDP and DP 90046<https://bugs.freedesktop.org/show_bug.cgi?id=90046> - [HSW ] test S3 with 3pipe cause *ERROR* 82551<https://bugs.freedesktop.org/show_bug.cgi?id=82551> - [HSW/BDW/SKL mobile] HDMI hot plug sporadically cause ERROR Bug 74102<https://bugs.freedesktop.org/show_bug.cgi?id=74102> - [ILK/SNB/IVB/HSW/BDW]igt/testdisplay causes *ERROR* Pipe A FIFO underrun Fixed bugs: 90236<https://bugs.freedesktop.org/show_bug.cgi?id=90236> - [HSW mobile Bisected] Screen is blank while run "mplayer -vo vaapi -va vaapi " 90059<https://bugs.freedesktop.org/show_bug.cgi?id=90059> - [BYT/BSW bisected]Start up the machine with HDMI screen causes WARNING New bugs found in nightly testing: 90732<https://bugs.freedesktop.org/show_bug.cgi?id=90732> - [BDW/BSW Regression]igt/gem_reloc_vs_gpu/forked-faulting-reloc-thrashing-hang causes GPU reset fail Bests Jeff
_______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
