Looks good to me.
Reviewed-by: Sonika Jindal <sonika.jin...@intel.com>

On 6/18/2015 7:55 PM, Imre Deak wrote:
For the purpose of state checking we only care about the DPLL HW flags
that we actually program, so mask off the ones that we don't.

This fixes one set of DPLL state check failures.

Signed-off-by: Imre Deak <imre.d...@intel.com>
---
  drivers/gpu/drm/i915/intel_ddi.c | 20 ++++++++++++++++++++
  1 file changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 9ae297a..bdc5677 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2479,13 +2479,32 @@ static bool bxt_ddi_pll_get_hw_state(struct 
drm_i915_private *dev_priv,
                return false;

        hw_state->ebb0 = I915_READ(BXT_PORT_PLL_EBB_0(port));
+       hw_state->ebb0 &= PORT_PLL_P1_MASK | PORT_PLL_P2_MASK;
+
        hw_state->pll0 = I915_READ(BXT_PORT_PLL(port, 0));
+       hw_state->pll0 &= PORT_PLL_M2_MASK;
+
        hw_state->pll1 = I915_READ(BXT_PORT_PLL(port, 1));
+       hw_state->pll1 &= PORT_PLL_N_MASK;
+
        hw_state->pll2 = I915_READ(BXT_PORT_PLL(port, 2));
+       hw_state->pll2 &= PORT_PLL_M2_FRAC_MASK;
+
        hw_state->pll3 = I915_READ(BXT_PORT_PLL(port, 3));
+       hw_state->pll3 &= PORT_PLL_M2_FRAC_ENABLE;
+
        hw_state->pll6 = I915_READ(BXT_PORT_PLL(port, 6));
+       hw_state->pll6 &= PORT_PLL_PROP_COEFF_MASK |
+                         PORT_PLL_INT_COEFF_MASK |
+                         PORT_PLL_GAIN_CTL_MASK;
+
        hw_state->pll8 = I915_READ(BXT_PORT_PLL(port, 8));
+       hw_state->pll8 &= PORT_PLL_TARGET_CNT_MASK;
+
        hw_state->pll10 = I915_READ(BXT_PORT_PLL(port, 10));
+       hw_state->pll10 &= PORT_PLL_DCO_AMP_OVR_EN_H |
+                          PORT_PLL_DCO_AMP_MASK;
+
        /*
         * While we write to the group register to program all lanes at once we
         * can read only lane registers. We configure all lanes the same way, so
@@ -2496,6 +2515,7 @@ static bool bxt_ddi_pll_get_hw_state(struct 
drm_i915_private *dev_priv,
                DRM_DEBUG_DRIVER("lane stagger config different for lane 01 (%08x) 
and 23 (%08x)\n",
                                 hw_state->pcsdw12,
                                 I915_READ(BXT_PORT_PCS_DW12_LN23(port)));
+       hw_state->pcsdw12 &= LANE_STAGGER_MASK | LANESTAGGER_STRAP_OVRD;

        return true;
  }

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to