On Fri, Jul 17, 2015 at 03:33:16PM +0100, john.c.harri...@intel.com wrote:
> From: John Harrison <john.c.harri...@intel.com>
>
> Initial creation of scheduler source files. Note that this patch implements
> most
> of the scheduler functionality but does not hook it in to the driver yet. It
> also leaves the scheduler code in 'pass through' mode so that even when it is
> hooked in, it will not actually do very much. This allows the hooks to be
> added
> one at a time in byte size chunks and only when the scheduler is finally
> enabled
> at the end does anything start happening.
>
> The general theory of operation is that when batch buffers are submitted to
> the
> driver, the execbuffer() code assigns a unique request and then packages up
> all
> the information required to execute the batch buffer at a later time. This
> package is given over to the scheduler which adds it to an internal node list.
> The scheduler also scans the list of objects associated with the batch buffer
> and compares them against the objects already in use by other buffers in the
> node list. If matches are found then the new batch buffer node is marked as
> being dependent upon the matching node. The same is done for the context
> object.
> The scheduler also bumps up the priority of such matching nodes on the grounds
> that the more dependencies a given batch buffer has the more important it is
> likely to be.
>
> The scheduler aims to have a given (tuneable) number of batch buffers in
> flight
> on the hardware at any given time. If fewer than this are currently executing
> when a new node is queued, then the node is passed straight through to the
> submit function. Otherwise it is simply added to the queue and the driver
> returns back to user land.
>
> As each batch buffer completes, it raises an interrupt which wakes up the
> scheduler. Note that it is possible for multiple buffers to complete before
> the
> IRQ handler gets to run. Further, it is possible for the seqno values to be
> un-ordered (particularly once pre-emption is enabled). However, the scheduler
> keeps the list of executing buffers in order of hardware submission. Thus it
> can
> scan through the list until a matching seqno is found and then mark all in
> flight nodes from that point on as completed.
>
> A deferred work queue is also poked by the interrupt handler. When this wakes
> up
> it can do more involved processing such as actually removing completed nodes
> from the queue and freeing up the resources associated with them (internal
> memory allocations, DRM object references, context reference, etc.). The work
> handler also checks the in flight count and calls the submission code if a new
> slot has appeared.
>
> When the scheduler's submit code is called, it scans the queued node list for
> the highest priority node that has no unmet dependencies. Note that the
> dependency calculation is complex as it must take inter-ring dependencies and
> potential preemptions into account. Note also that in the future this will be
> extended to include external dependencies such as the Android Native Sync file
> descriptors and/or the linux dma-buff synchronisation scheme.
>
> If a suitable node is found then it is sent to execbuff_final() for submission
> to the hardware. The in flight count is then re-checked and a new node popped
> from the list if appropriate.
>
> Note that this patch does not implement pre-emptive scheduling. Only basic
> scheduling by re-ordering batch buffer submission is currently implemented.
>
> Change-Id: I1e08f59e650a3c2bbaaa9de7627da33849b06106
> For: VIZ-1587
> Signed-off-by: John Harrison <john.c.harri...@intel.com>
> ---
> drivers/gpu/drm/i915/Makefile | 1 +
> drivers/gpu/drm/i915/i915_drv.h | 4 +
> drivers/gpu/drm/i915/i915_gem.c | 5 +
> drivers/gpu/drm/i915/i915_scheduler.c | 776
> ++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/i915_scheduler.h | 91 ++++
> 5 files changed, 877 insertions(+)
> create mode 100644 drivers/gpu/drm/i915/i915_scheduler.c
> create mode 100644 drivers/gpu/drm/i915/i915_scheduler.h
>
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index 47a74114..c367b39 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -9,6 +9,7 @@ ccflags-y := -Werror
> # core driver code
> i915-y := i915_drv.o \
> i915_params.o \
> + i915_scheduler.o \
> i915_suspend.o \
> i915_sysfs.o \
> intel_pm.o \
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index a680778..7d2a494 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1700,6 +1700,8 @@ struct i915_execbuffer_params {
> struct drm_i915_gem_request *request;
> };
>
> +struct i915_scheduler;
> +
> struct drm_i915_private {
> struct drm_device *dev;
> struct kmem_cache *objects;
> @@ -1932,6 +1934,8 @@ struct drm_i915_private {
>
> struct i915_runtime_pm pm;
>
> + struct i915_scheduler *scheduler;
> +
> /* Abstract the submission mechanism (legacy ringbuffer or execlists)
> away */
> struct {
> int (*execbuf_submit)(struct i915_execbuffer_params *params,
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index 0c407ae..3fbc6ec 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -40,6 +40,7 @@
> #ifdef CONFIG_SYNC
> #include <../drivers/staging/android/sync.h>
> #endif
> +#include "i915_scheduler.h"
>
> #define RQ_BUG_ON(expr)
>
> @@ -5398,6 +5399,10 @@ i915_gem_init_hw(struct drm_device *dev)
>
> i915_gem_init_swizzling(dev);
>
> + ret = i915_scheduler_init(dev);
> + if (ret)
> + return ret;
> +
> /*
> * At least 830 can leave some of the unused rings
> * "active" (ie. head != tail) after resume which
> diff --git a/drivers/gpu/drm/i915/i915_scheduler.c
> b/drivers/gpu/drm/i915/i915_scheduler.c
> new file mode 100644
> index 0000000..71d8df7
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/i915_scheduler.c
> @@ -0,0 +1,776 @@
> +/*
> + * Copyright (c) 2014 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +
> +#include "i915_drv.h"
> +#include "intel_drv.h"
> +#include "i915_scheduler.h"
> +
> +static int i915_scheduler_fly_node(struct i915_scheduler_queue_entry
> *node);
> +static int i915_scheduler_remove_dependent(struct i915_scheduler
> *scheduler,
> + struct
> i915_scheduler_queue_entry *remove);
> +static int i915_scheduler_submit(struct intel_engine_cs *ring,
> + bool is_locked);
> +static uint32_t i915_scheduler_count_flying(struct i915_scheduler
> *scheduler,
> + struct intel_engine_cs *ring);
> +static void i915_scheduler_priority_bump_clear(struct i915_scheduler
> *scheduler);
> +static int i915_scheduler_priority_bump(struct i915_scheduler
> *scheduler,
> + struct
> i915_scheduler_queue_entry *target,
> + uint32_t bump);
> +
> +int i915_scheduler_init(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct i915_scheduler *scheduler = dev_priv->scheduler;
> + int r;
> +
> + if (scheduler)
> + return 0;
> +
> + scheduler = kzalloc(sizeof(*scheduler), GFP_KERNEL);
> + if (!scheduler)
> + return -ENOMEM;
> +
> + spin_lock_init(&scheduler->lock);
> +
> + for (r = 0; r < I915_NUM_RINGS; r++)
> + INIT_LIST_HEAD(&scheduler->node_queue[r]);
> +
> + scheduler->index = 1;
> +
> + /* Default tuning values: */
> + scheduler->priority_level_max = ~0U;
> + scheduler->priority_level_preempt = 900;
> + scheduler->min_flying = 2;
> +
> + dev_priv->scheduler = scheduler;
> +
> + return 0;
> +}
> +
> +int i915_scheduler_queue_execbuffer(struct i915_scheduler_queue_entry *qe)
> +{
> + struct drm_i915_private *dev_priv = qe->params.dev->dev_private;
> + struct i915_scheduler *scheduler = dev_priv->scheduler;
> + struct intel_engine_cs *ring = qe->params.ring;
> + struct i915_scheduler_queue_entry *node;
> + struct i915_scheduler_queue_entry *test;
> + struct timespec stamp;
> + unsigned long flags;
> + bool not_flying, found;
> + int i, j, r;
> + int incomplete = 0;
> +
> + BUG_ON(!scheduler);
> +
> + if (1/*i915.scheduler_override & i915_so_direct_submit*/) {
> + int ret;
> +
> + qe->scheduler_index = scheduler->index++;
> +
> + scheduler->flags[qe->params.ring->id] |= i915_sf_submitting;
> + ret = dev_priv->gt.execbuf_final(&qe->params);
> + scheduler->flags[qe->params.ring->id] &= ~i915_sf_submitting;
> +
> + /*
> + * Don't do any clean up on failure because the caller will
> + * do it all anyway.
> + */
> + if (ret)
> + return ret;
> +
> + /* Free everything that is owned by the QE structure: */
> + kfree(qe->params.cliprects);
> + if (qe->params.dispatch_flags & I915_DISPATCH_SECURE)
> +
> i915_gem_execbuff_release_batch_obj(qe->params.batch_obj);
> +
> + return 0;
> + }
> +
> + getrawmonotonic(&stamp);
> +
> + node = kmalloc(sizeof(*node), GFP_KERNEL);
> + if (!node)
> + return -ENOMEM;
> +
> + *node = *qe;
> + INIT_LIST_HEAD(&node->link);
> + node->status = i915_sqs_queued;
> + node->stamp = stamp;
> + i915_gem_request_reference(node->params.request);
> +
> + /* Need to determine the number of incomplete entries in the list as
> + * that will be the maximum size of the dependency list.
> + *
> + * Note that the allocation must not be made with the spinlock acquired
> + * as kmalloc can sleep. However, the unlock/relock is safe because no
> + * new entries can be queued up during the unlock as the i915 driver
> + * mutex is still held. Entries could be removed from the list but that
> + * just means the dep_list will be over-allocated which is fine.
> + */
> + spin_lock_irqsave(&scheduler->lock, flags);
> + for (r = 0; r < I915_NUM_RINGS; r++) {
> + list_for_each_entry(test, &scheduler->node_queue[r], link) {
> + if (I915_SQS_IS_COMPLETE(test))
> + continue;
> +
> + incomplete++;
> + }
> + }
> +
> + /* Temporarily unlock to allocate memory: */
> + spin_unlock_irqrestore(&scheduler->lock, flags);
> + if (incomplete) {
> + node->dep_list = kmalloc(sizeof(node->dep_list[0]) * incomplete,
> + GFP_KERNEL);
> + if (!node->dep_list) {
> + kfree(node);
> + return -ENOMEM;
> + }
> + } else
> + node->dep_list = NULL;
> +
> + spin_lock_irqsave(&scheduler->lock, flags);
> + node->num_deps = 0;
> +
> + if (node->dep_list) {
> + for (r = 0; r < I915_NUM_RINGS; r++) {
> + list_for_each_entry(test, &scheduler->node_queue[r],
> link) {
> + if (I915_SQS_IS_COMPLETE(test))
> + continue;
> +
> + /*
> + * Batches on the same ring for the same
> + * context must be kept in order.
> + */
> + found = (node->params.ctx == test->params.ctx)
> &&
> + (node->params.ring ==
> test->params.ring);
> +
> + /*
> + * Batches working on the same objects must
> + * be kept in order.
> + */
> + for (i = 0; (i < node->num_objs) && !found;
> i++) {
> + for (j = 0; j < test->num_objs; j++) {
> + if (node->saved_objects[i].obj
> !=
> +
> test->saved_objects[j].obj)
> + continue;
> +
> + found = true;
> + break;
I guess this should be a goto to break out of both loops?
> + }
> + }
> +
> + if (found) {
> + node->dep_list[node->num_deps] = test;
> + node->num_deps++;
> + }
> + }
> + }
> +
> + BUG_ON(node->num_deps > incomplete);
> + }
This seems to be O(pending_requests * obj_per_request ^ 2), which is a bit
excessive. Also since you only check deps at the object level this breaks
read-read.
Finally move_to_active does track all this already since it has to
exchange all the request for new ones. We might want to move object_sync
in there too just because, but I think this would definitely fit better
in there.
-Daniel
> +
> + if (node->priority && node->num_deps) {
> + i915_scheduler_priority_bump_clear(scheduler);
> +
> + for (i = 0; i < node->num_deps; i++)
> + i915_scheduler_priority_bump(scheduler,
> + node->dep_list[i], node->priority);
> + }
> +
> + node->scheduler_index = scheduler->index++;
> +
> + list_add_tail(&node->link, &scheduler->node_queue[ring->id]);
> +
> + not_flying = i915_scheduler_count_flying(scheduler, ring) <
> + scheduler->min_flying;
> +
> + spin_unlock_irqrestore(&scheduler->lock, flags);
> +
> + if (not_flying)
> + i915_scheduler_submit(ring, true);
> +
> + return 0;
> +}
> +
> +static int i915_scheduler_fly_node(struct i915_scheduler_queue_entry *node)
> +{
> + struct drm_i915_private *dev_priv = node->params.dev->dev_private;
> + struct i915_scheduler *scheduler = dev_priv->scheduler;
> + struct intel_engine_cs *ring;
> +
> + BUG_ON(!scheduler);
> + BUG_ON(!node);
> + BUG_ON(node->status != i915_sqs_popped);
> +
> + ring = node->params.ring;
> +
> + /* Add the node (which should currently be in state none) to the front
> + * of the queue. This ensure that flying nodes are always held in
> + * hardware submission order. */
> + list_add(&node->link, &scheduler->node_queue[ring->id]);
> +
> + node->status = i915_sqs_flying;
> +
> + if (!(scheduler->flags[ring->id] & i915_sf_interrupts_enabled)) {
> + bool success = true;
> +
> + success = ring->irq_get(ring);
> + if (success)
> + scheduler->flags[ring->id] |=
> i915_sf_interrupts_enabled;
> + else
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Nodes are considered valid dependencies if they are queued on any ring or
> + * if they are in flight on a different ring. In flight on the same ring is
> no
> + * longer interesting for non-premptive nodes as the ring serialises
> execution.
> + * For pre-empting nodes, all in flight dependencies are valid as they must
> not
> + * be jumped by the act of pre-empting.
> + *
> + * Anything that is neither queued nor flying is uninteresting.
> + */
> +static inline bool i915_scheduler_is_dependency_valid(
> + struct i915_scheduler_queue_entry *node, uint32_t idx)
> +{
> + struct i915_scheduler_queue_entry *dep;
> +
> + dep = node->dep_list[idx];
> + if (!dep)
> + return false;
> +
> + if (I915_SQS_IS_QUEUED(dep))
> + return true;
> +
> + if (I915_SQS_IS_FLYING(dep)) {
> + if (node->params.ring != dep->params.ring)
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static uint32_t i915_scheduler_count_flying(struct i915_scheduler *scheduler,
> + struct intel_engine_cs *ring)
> +{
> + struct i915_scheduler_queue_entry *node;
> + uint32_t flying = 0;
> +
> + list_for_each_entry(node, &scheduler->node_queue[ring->id], link)
> + if (I915_SQS_IS_FLYING(node))
> + flying++;
> +
> + return flying;
> +}
> +
> +/* Add a popped node back in to the queue. For example, because the ring was
> + * hung when execfinal() was called and thus the ring submission needs to be
> + * retried later. */
> +static void i915_scheduler_node_requeue(struct i915_scheduler_queue_entry
> *node)
> +{
> + BUG_ON(!node);
> + BUG_ON(!I915_SQS_IS_FLYING(node));
> +
> + node->status = i915_sqs_queued;
> +}
> +
> +/* Give up on a popped node completely. For example, because it is causing
> the
> + * ring to hang or is using some resource that no longer exists. */
> +static void i915_scheduler_node_kill(struct i915_scheduler_queue_entry *node)
> +{
> + BUG_ON(!node);
> + BUG_ON(!I915_SQS_IS_FLYING(node));
> +
> + node->status = i915_sqs_dead;
> +}
> +
> +/*
> + * The batch tagged with the indicated seqence number has completed.
> + * Search the queue for it, update its status and those of any batches
> + * submitted earlier, which must also have completed or been preeempted
> + * as appropriate.
> + *
> + * Called with spinlock already held.
> + */
> +static void i915_scheduler_seqno_complete(struct intel_engine_cs *ring,
> uint32_t seqno)
> +{
> + struct drm_i915_private *dev_priv = ring->dev->dev_private;
> + struct i915_scheduler *scheduler = dev_priv->scheduler;
> + struct i915_scheduler_queue_entry *node;
> + bool got_changes = false;
> +
> + /*
> + * Batch buffers are added to the head of the list in execution order,
> + * thus seqno values, although not necessarily incrementing, will be
> + * met in completion order when scanning the list. So when a match is
> + * found, all subsequent entries must have also popped out. Conversely,
> + * if a completed entry is found then there is no need to scan further.
> + */
> + list_for_each_entry(node, &scheduler->node_queue[ring->id], link) {
> + if (I915_SQS_IS_COMPLETE(node))
> + return;
> +
> + if (seqno == node->params.request->seqno)
> + break;
> + }
> +
> + /*
> + * NB: Lots of extra seqnos get added to the ring to track things
> + * like cache flushes and page flips. So don't complain about if
> + * no node was found.
> + */
> + if (&node->link == &scheduler->node_queue[ring->id])
> + return;
> +
> + WARN_ON(!I915_SQS_IS_FLYING(node));
> +
> + /* Everything from here can be marked as done: */
> + list_for_each_entry_from(node, &scheduler->node_queue[ring->id], link) {
> + /* Check if the marking has already been done: */
> + if (I915_SQS_IS_COMPLETE(node))
> + break;
> +
> + if (!I915_SQS_IS_FLYING(node))
> + continue;
> +
> + /* Node was in flight so mark it as complete. */
> + node->status = i915_sqs_complete;
> + got_changes = true;
> + }
> +
> + /* Should submit new work here if flight list is empty but the DRM
> + * mutex lock might not be available if a '__wait_request()' call is
> + * blocking the system. */
> +}
> +
> +int i915_scheduler_handle_irq(struct intel_engine_cs *ring)
> +{
> + struct drm_i915_private *dev_priv = ring->dev->dev_private;
> + struct i915_scheduler *scheduler = dev_priv->scheduler;
> + unsigned long flags;
> + uint32_t seqno;
> +
> + seqno = ring->get_seqno(ring, false);
> +
> + if (1/*i915.scheduler_override & i915_so_direct_submit*/)
> + return 0;
> +
> + if (seqno == scheduler->last_irq_seqno[ring->id]) {
> + /* Why are there sometimes multiple interrupts per seqno? */
> + return 0;
> + }
> + scheduler->last_irq_seqno[ring->id] = seqno;
> +
> + spin_lock_irqsave(&scheduler->lock, flags);
> + i915_scheduler_seqno_complete(ring, seqno);
> + spin_unlock_irqrestore(&scheduler->lock, flags);
> +
> + /* XXX: Need to also call i915_scheduler_remove() via work handler. */
> +
> + return 0;
> +}
> +
> +int i915_scheduler_remove(struct intel_engine_cs *ring)
> +{
> + struct drm_i915_private *dev_priv = ring->dev->dev_private;
> + struct i915_scheduler *scheduler = dev_priv->scheduler;
> + struct i915_scheduler_queue_entry *node, *node_next;
> + unsigned long flags;
> + int flying = 0, queued = 0;
> + int ret = 0;
> + bool do_submit;
> + uint32_t min_seqno;
> + struct list_head remove;
> +
> + if (list_empty(&scheduler->node_queue[ring->id]))
> + return 0;
> +
> + spin_lock_irqsave(&scheduler->lock, flags);
> +
> + /* /i915_scheduler_dump_locked(ring, "remove/pre");/ */
> +
> + /*
> + * In the case where the system is idle, starting 'min_seqno' from a big
> + * number will cause all nodes to be removed as they are now back to
> + * being in-order. However, this will be a problem if the last one to
> + * complete was actually out-of-order as the ring seqno value will be
> + * lower than one or more completed buffers. Thus code looking for the
> + * completion of said buffers will wait forever.
> + * Instead, use the hardware seqno as the starting point. This means
> + * that some buffers might be kept around even in a completely idle
> + * system but it should guarantee that no-one ever gets confused when
> + * waiting for buffer completion.
> + */
> + min_seqno = ring->get_seqno(ring, true);
> +
> + list_for_each_entry(node, &scheduler->node_queue[ring->id], link) {
> + if (I915_SQS_IS_QUEUED(node))
> + queued++;
> + else if (I915_SQS_IS_FLYING(node))
> + flying++;
> + else if (I915_SQS_IS_COMPLETE(node))
> + continue;
> +
> + if (node->params.request->seqno == 0)
> + continue;
> +
> + if (!i915_seqno_passed(node->params.request->seqno, min_seqno))
> + min_seqno = node->params.request->seqno;
> + }
> +
> + INIT_LIST_HEAD(&remove);
> + list_for_each_entry_safe(node, node_next,
> &scheduler->node_queue[ring->id], link) {
> + /*
> + * Only remove completed nodes which have a lower seqno than
> + * all pending nodes. While there is the possibility of the
> + * ring's seqno counting backwards, all higher buffers must
> + * be remembered so that the 'i915_seqno_passed()' test can
> + * report that they have in fact passed.
> + *
> + * NB: This is not true for 'dead' nodes. The GPU reset causes
> + * the software seqno to restart from its initial value. Thus
> + * the dead nodes must be removed even though their seqno values
> + * are potentially vastly greater than the current ring seqno.
> + */
> + if (!I915_SQS_IS_COMPLETE(node))
> + continue;
> +
> + if (node->status != i915_sqs_dead) {
> + if (i915_seqno_passed(node->params.request->seqno,
> min_seqno) &&
> + (node->params.request->seqno != min_seqno))
> + continue;
> + }
> +
> + list_del(&node->link);
> + list_add(&node->link, &remove);
> +
> + /* Strip the dependency info while the mutex is still locked */
> + i915_scheduler_remove_dependent(scheduler, node);
> +
> + continue;
> + }
> +
> + /*
> + * No idea why but this seems to cause problems occasionally.
> + * Note that the 'irq_put' code is internally reference counted
> + * and spin_locked so it should be safe to call.
> + */
> + /*if ((scheduler->flags[ring->id] & i915_sf_interrupts_enabled) &&
> + (first_flight[ring->id] == NULL)) {
> + ring->irq_put(ring);
> + scheduler->flags[ring->id] &= ~i915_sf_interrupts_enabled;
> + }*/
> +
> + /* Launch more packets now? */
> + do_submit = (queued > 0) && (flying < scheduler->min_flying);
> +
> + spin_unlock_irqrestore(&scheduler->lock, flags);
> +
> + if (do_submit)
> + ret = i915_scheduler_submit(ring, true);
> +
> + while (!list_empty(&remove)) {
> + node = list_first_entry(&remove, typeof(*node), link);
> + list_del(&node->link);
> +
> + /* The batch buffer must be unpinned before it is unreferenced
> + * otherwise the unpin fails with a missing vma!? */
> + if (node->params.dispatch_flags & I915_DISPATCH_SECURE)
> +
> i915_gem_execbuff_release_batch_obj(node->params.batch_obj);
> +
> + /* Free everything that is owned by the node: */
> + i915_gem_request_unreference(node->params.request);
> + kfree(node->params.cliprects);
> + kfree(node->dep_list);
> + kfree(node);
> + }
> +
> + return ret;
> +}
> +
> +static void i915_scheduler_priority_bump_clear(struct i915_scheduler
> *scheduler)
> +{
> + struct i915_scheduler_queue_entry *node;
> + int i;
> +
> + /*
> + * Ensure circular dependencies don't cause problems and that a bump
> + * by object usage only bumps each using buffer once:
> + */
> + for (i = 0; i < I915_NUM_RINGS; i++) {
> + list_for_each_entry(node, &scheduler->node_queue[i], link)
> + node->bumped = false;
> + }
> +}
> +
> +static int i915_scheduler_priority_bump(struct i915_scheduler *scheduler,
> + struct i915_scheduler_queue_entry
> *target,
> + uint32_t bump)
> +{
> + uint32_t new_priority;
> + int i, count;
> +
> + if (target->priority >= scheduler->priority_level_max)
> + return 1;
> +
> + if (target->bumped)
> + return 0;
> +
> + new_priority = target->priority + bump;
> + if ((new_priority <= target->priority) ||
> + (new_priority > scheduler->priority_level_max))
> + target->priority = scheduler->priority_level_max;
> + else
> + target->priority = new_priority;
> +
> + count = 1;
> + target->bumped = true;
> +
> + for (i = 0; i < target->num_deps; i++) {
> + if (!target->dep_list[i])
> + continue;
> +
> + if (target->dep_list[i]->bumped)
> + continue;
> +
> + count += i915_scheduler_priority_bump(scheduler,
> + target->dep_list[i],
> + bump);
> + }
> +
> + return count;
> +}
> +
> +static int i915_scheduler_pop_from_queue_locked(struct intel_engine_cs *ring,
> + struct i915_scheduler_queue_entry
> **pop_node,
> + unsigned long *flags)
> +{
> + struct drm_i915_private *dev_priv = ring->dev->dev_private;
> + struct i915_scheduler *scheduler = dev_priv->scheduler;
> + struct i915_scheduler_queue_entry *best;
> + struct i915_scheduler_queue_entry *node;
> + int ret;
> + int i;
> + bool any_queued;
> + bool has_local, has_remote, only_remote;
> +
> + *pop_node = NULL;
> + ret = -ENODATA;
> +
> + any_queued = false;
> + only_remote = false;
> + best = NULL;
> +
> + list_for_each_entry(node, &scheduler->node_queue[ring->id], link) {
> + if (!I915_SQS_IS_QUEUED(node))
> + continue;
> + any_queued = true;
> +
> + has_local = false;
> + has_remote = false;
> + for (i = 0; i < node->num_deps; i++) {
> + if (!i915_scheduler_is_dependency_valid(node, i))
> + continue;
> +
> + if (node->dep_list[i]->params.ring == node->params.ring)
> + has_local = true;
> + else
> + has_remote = true;
> + }
> +
> + if (has_remote && !has_local)
> + only_remote = true;
> +
> + if (!has_local && !has_remote) {
> + if (!best ||
> + (node->priority > best->priority))
> + best = node;
> + }
> + }
> +
> + if (best) {
> + list_del(&best->link);
> +
> + INIT_LIST_HEAD(&best->link);
> + best->status = i915_sqs_popped;
> +
> + ret = 0;
> + } else {
> + /* Can only get here if:
> + * (a) there are no buffers in the queue
> + * (b) all queued buffers are dependent on other buffers
> + * e.g. on a buffer that is in flight on a different ring
> + */
> + if (only_remote) {
> + /* The only dependent buffers are on another ring. */
> + ret = -EAGAIN;
> + } else if (any_queued) {
> + /* It seems that something has gone horribly wrong! */
> + DRM_ERROR("Broken dependency tracking on ring %d!\n",
> + (int) ring->id);
> + }
> + }
> +
> + /* i915_scheduler_dump_queue_pop(ring, best); */
> +
> + *pop_node = best;
> + return ret;
> +}
> +
> +static int i915_scheduler_submit(struct intel_engine_cs *ring, bool
> was_locked)
> +{
> + struct drm_device *dev = ring->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct i915_scheduler *scheduler = dev_priv->scheduler;
> + struct i915_scheduler_queue_entry *node;
> + unsigned long flags;
> + int ret = 0, count = 0;
> +
> + if (!was_locked) {
> + ret = i915_mutex_lock_interruptible(dev);
Nah, scheduler needs its own hw lock, otherwise hell will break lose with
locking inversions. We might need to add engine->hw_lock.
> + if (ret)
> + return ret;
> + }
> +
> + BUG_ON(!mutex_is_locked(&dev->struct_mutex));
> +
> + spin_lock_irqsave(&scheduler->lock, flags);
> +
> + /* First time around, complain if anything unexpected occurs: */
> + ret = i915_scheduler_pop_from_queue_locked(ring, &node, &flags);
> + if (ret) {
> + spin_unlock_irqrestore(&scheduler->lock, flags);
> +
> + if (!was_locked)
> + mutex_unlock(&dev->struct_mutex);
> +
> + return ret;
> + }
> +
> + do {
> + BUG_ON(!node);
> + BUG_ON(node->params.ring != ring);
> + BUG_ON(node->status != i915_sqs_popped);
> + count++;
> +
> + /* The call to pop above will have removed the node from the
> + * list. So add it back in and mark it as in flight. */
> + i915_scheduler_fly_node(node);
> +
> + scheduler->flags[ring->id] |= i915_sf_submitting;
> + spin_unlock_irqrestore(&scheduler->lock, flags);
> + ret = dev_priv->gt.execbuf_final(&node->params);
> + spin_lock_irqsave(&scheduler->lock, flags);
> + scheduler->flags[ring->id] &= ~i915_sf_submitting;
> +
> + if (ret) {
> + bool requeue = true;
> +
> + /* Oh dear! Either the node is broken or the ring is
> + * busy. So need to kill the node or requeue it and try
> + * again later as appropriate. */
> +
> + switch (-ret) {
> + case ENODEV:
> + case ENOENT:
> + /* Fatal errors. Kill the node. */
> + requeue = false;
> + break;
> +
> + case EAGAIN:
> + case EBUSY:
> + case EIO:
> + case ENOMEM:
> + case ERESTARTSYS:
> + case EINTR:
> + /* Supposedly recoverable errors. */
> + break;
> +
> + default:
> + DRM_DEBUG_DRIVER("<%s> Got unexpected error
> from execfinal(): %d!\n",
> + ring->name, ret);
> + /* Assume it is recoverable and hope for the
> best. */
> + break;
> + }
> +
> + if (requeue) {
> + i915_scheduler_node_requeue(node);
> + /* No point spinning if the ring is currently
> + * unavailable so just give up and come back
> + * later. */
> + break;
> + } else
> + i915_scheduler_node_kill(node);
> + }
> +
> + /* Keep launching until the sky is sufficiently full. */
> + if (i915_scheduler_count_flying(scheduler, ring) >=
> + scheduler->min_flying)
> + break;
> +
> + ret = i915_scheduler_pop_from_queue_locked(ring, &node, &flags);
> + } while (ret == 0);
> +
> + spin_unlock_irqrestore(&scheduler->lock, flags);
> +
> + if (!was_locked)
> + mutex_unlock(&dev->struct_mutex);
> +
> + /* Don't complain about not being able to submit extra entries */
> + if (ret == -ENODATA)
> + ret = 0;
> +
> + return (ret < 0) ? ret : count;
> +}
> +
> +static int i915_scheduler_remove_dependent(struct i915_scheduler *scheduler,
> + struct i915_scheduler_queue_entry
> *remove)
> +{
> + struct i915_scheduler_queue_entry *node;
> + int i, r;
> + int count = 0;
> +
> + for (i = 0; i < remove->num_deps; i++)
> + if ((remove->dep_list[i]) &&
> + (!I915_SQS_IS_COMPLETE(remove->dep_list[i])))
> + count++;
> + BUG_ON(count);
> +
> + for (r = 0; r < I915_NUM_RINGS; r++) {
> + list_for_each_entry(node, &scheduler->node_queue[r], link) {
> + for (i = 0; i < node->num_deps; i++) {
> + if (node->dep_list[i] != remove)
> + continue;
> +
> + node->dep_list[i] = NULL;
> + }
> + }
> + }
> +
> + return 0;
> +}
> diff --git a/drivers/gpu/drm/i915/i915_scheduler.h
> b/drivers/gpu/drm/i915/i915_scheduler.h
> new file mode 100644
> index 0000000..0c5fc7f
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/i915_scheduler.h
> @@ -0,0 +1,91 @@
> +/*
> + * Copyright (c) 2014 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +
> +#ifndef _I915_SCHEDULER_H_
> +#define _I915_SCHEDULER_H_
> +
> +enum i915_scheduler_queue_status {
> + /* Limbo: */
> + i915_sqs_none = 0,
> + /* Not yet submitted to hardware: */
> + i915_sqs_queued,
> + /* Popped from queue, ready to fly: */
> + i915_sqs_popped,
> + /* Sent to hardware for processing: */
> + i915_sqs_flying,
> + /* Finished processing on the hardware: */
> + i915_sqs_complete,
> + /* Killed by catastrophic submission failure: */
> + i915_sqs_dead,
> + /* Limit value for use with arrays/loops */
> + i915_sqs_MAX
> +};
> +
> +#define I915_SQS_IS_QUEUED(node) (((node)->status == i915_sqs_queued))
> +#define I915_SQS_IS_FLYING(node) (((node)->status == i915_sqs_flying))
> +#define I915_SQS_IS_COMPLETE(node) (((node)->status == i915_sqs_complete)
> || \
> + ((node)->status == i915_sqs_dead))
> +
> +struct i915_scheduler_obj_entry {
> + struct drm_i915_gem_object *obj;
> +};
> +
> +struct i915_scheduler_queue_entry {
> + struct i915_execbuffer_params params;
> + uint32_t priority;
> + struct i915_scheduler_obj_entry *saved_objects;
> + int num_objs;
> + bool bumped;
> + struct i915_scheduler_queue_entry **dep_list;
> + int num_deps;
> + enum i915_scheduler_queue_status status;
> + struct timespec stamp;
> + struct list_head link;
> + uint32_t scheduler_index;
> +};
> +
> +struct i915_scheduler {
> + struct list_head node_queue[I915_NUM_RINGS];
> + uint32_t flags[I915_NUM_RINGS];
> + spinlock_t lock;
> + uint32_t index;
> + uint32_t last_irq_seqno[I915_NUM_RINGS];
> +
> + /* Tuning parameters: */
> + uint32_t priority_level_max;
> + uint32_t priority_level_preempt;
> + uint32_t min_flying;
> +};
> +
> +/* Flag bits for i915_scheduler::flags */
> +enum {
> + i915_sf_interrupts_enabled = (1 << 0),
> + i915_sf_submitting = (1 << 1),
> +};
> +
> +int i915_scheduler_init(struct drm_device *dev);
> +int i915_scheduler_queue_execbuffer(struct
> i915_scheduler_queue_entry *qe);
> +int i915_scheduler_handle_irq(struct intel_engine_cs *ring);
> +
> +#endif /* _I915_SCHEDULER_H_ */
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
