When using RC6 timeout mode, the timeout value should be written to GEN6_RC6_THRESHOLD.
v2: Updated commit message. (Tom) Signed-off-by: Sagar Arun Kamble <[email protected]> --- drivers/gpu/drm/i915/intel_pm.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index c98eee6..c16f496 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4791,7 +4791,6 @@ static void gen9_enable_rc6(struct drm_device *dev) I915_WRITE(GUC_MAX_IDLE_COUNT, 0xA); I915_WRITE(GEN6_RC_SLEEP, 0); - I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */ /* 2c: Program Coarse Power Gating Policies. */ I915_WRITE(GEN9_MEDIA_PG_IDLE_HYSTERESIS, 25); @@ -4802,16 +4801,19 @@ static void gen9_enable_rc6(struct drm_device *dev) rc6_mask = GEN6_RC_CTL_RC6_ENABLE; DRM_INFO("RC6 %s\n", (rc6_mask & GEN6_RC_CTL_RC6_ENABLE) ? "on" : "off"); - + /* WaRsUseTimeoutMode */ if ((IS_SKYLAKE(dev) && INTEL_REVID(dev) <= SKL_REVID_D0) || - (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A0)) + (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A0)) { + I915_WRITE(GEN6_RC6_THRESHOLD, 625); /* 800us */ I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE | GEN7_RC_CTL_TO_MODE | rc6_mask); - else + } else { + I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */ I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE | GEN6_RC_CTL_EI_MODE(1) | rc6_mask); + } /* * 3b: Enable Coarse Power Gating only when RC6 is enabled. -- 1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
