On Sat, Oct 10, 2015 at 10:44:32AM +0100, Chris Wilson wrote:
> We should serialise access to the intel_crtc->unpin_work through the
> dev->event_lock spinlock. It should not be possible for it to disappear
> without severe error as the mmio_flip worker has not tagged the
> unpin_work pending flip-completion. Similarly if the error exists, just
> taking the unpin_work whilst holding the spinlock and then using it
> unserialised just masks the race. (It is supposed to be valid as the
> unpin_work exists until the flip completion interrupt which should not
> fire until we flush the mmio writes to update the display base which is
> the last time we access the unpin_work from the kthread.)
> 
> References: https://bugs.freedesktop.org/show_bug.cgi?id=92335
> Signed-off-by: Chris Wilson <[email protected]>

So not sure what's going on yet?

Patch looks OK anyway so
Reviewed-by: Ville Syrjälä <[email protected]>

> ---
>  drivers/gpu/drm/i915/intel_display.c | 57 
> ++++++++++++++++++++----------------
>  1 file changed, 32 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c 
> b/drivers/gpu/drm/i915/intel_display.c
> index cddb0c692334..71d7298648e0 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10848,11 +10848,11 @@ void intel_prepare_page_flip(struct drm_device 
> *dev, int plane)
>       spin_unlock_irqrestore(&dev->event_lock, flags);
>  }
>  
> -static inline void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
> +static inline void intel_mark_page_flip_active(struct intel_unpin_work *work)
>  {
>       /* Ensure that the work item is consistent when activating it ... */
>       smp_wmb();
> -     atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
> +     atomic_set(&work->pending, INTEL_FLIP_PENDING);
>       /* and that it is marked active as soon as the irq could fire. */
>       smp_wmb();
>  }
> @@ -10888,7 +10888,7 @@ static int intel_gen2_queue_flip(struct drm_device 
> *dev,
>       intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
>       intel_ring_emit(ring, 0); /* aux display base address, unused */
>  
> -     intel_mark_page_flip_active(intel_crtc);
> +     intel_mark_page_flip_active(intel_crtc->unpin_work);
>       return 0;
>  }
>  
> @@ -10920,7 +10920,7 @@ static int intel_gen3_queue_flip(struct drm_device 
> *dev,
>       intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
>       intel_ring_emit(ring, MI_NOOP);
>  
> -     intel_mark_page_flip_active(intel_crtc);
> +     intel_mark_page_flip_active(intel_crtc->unpin_work);
>       return 0;
>  }
>  
> @@ -10959,7 +10959,7 @@ static int intel_gen4_queue_flip(struct drm_device 
> *dev,
>       pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
>       intel_ring_emit(ring, pf | pipesrc);
>  
> -     intel_mark_page_flip_active(intel_crtc);
> +     intel_mark_page_flip_active(intel_crtc->unpin_work);
>       return 0;
>  }
>  
> @@ -10995,7 +10995,7 @@ static int intel_gen6_queue_flip(struct drm_device 
> *dev,
>       pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
>       intel_ring_emit(ring, pf | pipesrc);
>  
> -     intel_mark_page_flip_active(intel_crtc);
> +     intel_mark_page_flip_active(intel_crtc->unpin_work);
>       return 0;
>  }
>  
> @@ -11090,7 +11090,7 @@ static int intel_gen7_queue_flip(struct drm_device 
> *dev,
>       intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
>       intel_ring_emit(ring, (MI_NOOP));
>  
> -     intel_mark_page_flip_active(intel_crtc);
> +     intel_mark_page_flip_active(intel_crtc->unpin_work);
>       return 0;
>  }
>  
> @@ -11121,7 +11121,8 @@ static bool use_mmio_flip(struct intel_engine_cs 
> *ring,
>               return ring != i915_gem_request_get_ring(obj->last_write_req);
>  }
>  
> -static void skl_do_mmio_flip(struct intel_crtc *intel_crtc)
> +static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
> +                          struct intel_unpin_work *work)
>  {
>       struct drm_device *dev = intel_crtc->base.dev;
>       struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -11162,11 +11163,12 @@ static void skl_do_mmio_flip(struct intel_crtc 
> *intel_crtc)
>       I915_WRITE(PLANE_CTL(pipe, 0), ctl);
>       I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
>  
> -     I915_WRITE(PLANE_SURF(pipe, 0), intel_crtc->unpin_work->gtt_offset);
> +     I915_WRITE(PLANE_SURF(pipe, 0), work->gtt_offset);
>       POSTING_READ(PLANE_SURF(pipe, 0));
>  }
>  
> -static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc)
> +static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc,
> +                          struct intel_unpin_work *work)
>  {
>       struct drm_device *dev = intel_crtc->base.dev;
>       struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -11186,31 +11188,36 @@ static void ilk_do_mmio_flip(struct intel_crtc 
> *intel_crtc)
>  
>       I915_WRITE(reg, dspcntr);
>  
> -     I915_WRITE(DSPSURF(intel_crtc->plane),
> -                intel_crtc->unpin_work->gtt_offset);
> +     I915_WRITE(DSPSURF(intel_crtc->plane), work->gtt_offset);
>       POSTING_READ(DSPSURF(intel_crtc->plane));
> -
>  }
>  
>  /*
>   * XXX: This is the temporary way to update the plane registers until we get
>   * around to using the usual plane update functions for MMIO flips
>   */
> -static void intel_do_mmio_flip(struct intel_crtc *intel_crtc)
> +static void intel_do_mmio_flip(struct intel_mmio_flip *mmio_flip)
>  {
> -     struct drm_device *dev = intel_crtc->base.dev;
> +     struct intel_crtc *crtc = mmio_flip->crtc;
> +     struct intel_unpin_work *work;
>  
> -     intel_mark_page_flip_active(intel_crtc);
> +     spin_lock_irq(&crtc->base.dev->event_lock);
> +     work = crtc->unpin_work;
> +     spin_unlock_irq(&crtc->base.dev->event_lock);
> +     if (work == NULL)
> +             return;
>
> -     intel_pipe_update_start(intel_crtc);
> +     intel_mark_page_flip_active(work);
>  
> -     if (INTEL_INFO(dev)->gen >= 9)
> -             skl_do_mmio_flip(intel_crtc);
> +     intel_pipe_update_start(crtc);
> +
> +     if (INTEL_INFO(mmio_flip->i915)->gen >= 9)
> +             skl_do_mmio_flip(crtc, work);
>       else
>               /* use_mmio_flip() retricts MMIO flips to ilk+ */
> -             ilk_do_mmio_flip(intel_crtc);
> +             ilk_do_mmio_flip(crtc, work);
>  
> -     intel_pipe_update_end(intel_crtc);
> +     intel_pipe_update_end(crtc);
>  }
>  
>  static void intel_mmio_flip_work_func(struct work_struct *work)
> @@ -11218,15 +11225,15 @@ static void intel_mmio_flip_work_func(struct 
> work_struct *work)
>       struct intel_mmio_flip *mmio_flip =
>               container_of(work, struct intel_mmio_flip, work);
>  
> -     if (mmio_flip->req)
> +     if (mmio_flip->req) {
>               WARN_ON(__i915_wait_request(mmio_flip->req,
>                                           mmio_flip->crtc->reset_counter,
>                                           false, NULL,
>                                           &mmio_flip->i915->rps.mmioflips));
> +             i915_gem_request_unreference__unlocked(mmio_flip->req);
> +     }
>  
> -     intel_do_mmio_flip(mmio_flip->crtc);
> -
> -     i915_gem_request_unreference__unlocked(mmio_flip->req);
> +     intel_do_mmio_flip(mmio_flip);
>       kfree(mmio_flip);
>  }
>  
> -- 
> 2.6.1
> 
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to