On Mon, 07 Dec 2015 10:41:51 +0100, Takashi Iwai wrote: > > On Mon, 07 Dec 2015 09:44:45 +0100, > Daniel Vetter wrote: > > > > On Fri, Dec 04, 2015 at 06:12:47PM +0100, Takashi Iwai wrote: > > > This patch adds a reverse mapping from a digital port number to > > > intel_encoder object containing the corresponding intel_digital_port. > > > It simplifies the query of the encoder a lot. > > > > > > Signed-off-by: Takashi Iwai <[email protected]> > > > --- > > > v2->v3: > > > * Squashed previously two cleanup patches to a single patch > > > > > > drivers/gpu/drm/i915/i915_drv.h | 2 ++ > > > drivers/gpu/drm/i915/intel_audio.c | 39 > > > +++++++++++--------------------------- > > > drivers/gpu/drm/i915/intel_ddi.c | 1 + > > > drivers/gpu/drm/i915/intel_dp.c | 1 + > > > drivers/gpu/drm/i915/intel_hdmi.c | 2 ++ > > > 5 files changed, 17 insertions(+), 28 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/i915/i915_drv.h > > > b/drivers/gpu/drm/i915/i915_drv.h > > > index 15c6dc0b4f37..9dbc143cac27 100644 > > > --- a/drivers/gpu/drm/i915/i915_drv.h > > > +++ b/drivers/gpu/drm/i915/i915_drv.h > > > @@ -1944,6 +1944,8 @@ struct drm_i915_private { > > > /* perform PHY state sanity checks? */ > > > bool chv_phy_assert[2]; > > > > > > + struct intel_encoder *dig_port_map[I915_MAX_PORTS]; > > > + > > > /* > > > * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch > > > * will be rejected. Instead look for a better place. > > > diff --git a/drivers/gpu/drm/i915/intel_audio.c > > > b/drivers/gpu/drm/i915/intel_audio.c > > > index eeac9f763110..05f08b445dd6 100644 > > > --- a/drivers/gpu/drm/i915/intel_audio.c > > > +++ b/drivers/gpu/drm/i915/intel_audio.c > > > @@ -636,13 +636,11 @@ static int > > > i915_audio_component_sync_audio_rate(struct device *dev, > > > int port, int rate) > > > { > > > struct drm_i915_private *dev_priv = dev_to_i915(dev); > > > - struct drm_device *drm_dev = dev_priv->dev; > > > struct intel_encoder *intel_encoder; > > > - struct intel_digital_port *intel_dig_port; > > > struct intel_crtc *crtc; > > > struct drm_display_mode *mode; > > > struct i915_audio_component *acomp = dev_priv->audio_component; > > > - enum pipe pipe = -1; > > > + enum pipe pipe = INVALID_PIPE; > > > u32 tmp; > > > int n; > > > > > > @@ -655,21 +653,12 @@ static int > > > i915_audio_component_sync_audio_rate(struct device *dev, > > > > > > mutex_lock(&dev_priv->av_mutex); > > > /* 1. get the pipe */ > > > - for_each_intel_encoder(drm_dev, intel_encoder) { > > > - if (intel_encoder->type != INTEL_OUTPUT_HDMI) > > > - continue; > > > - intel_dig_port = enc_to_dig_port(&intel_encoder->base); > > > - if (port == intel_dig_port->port) { > > > - crtc = to_intel_crtc(intel_encoder->base.crtc); > > > - if (!crtc) { > > > - DRM_DEBUG_KMS("%s: crtc is NULL\n", __func__); > > > - continue; > > > - } > > > - pipe = crtc->pipe; > > > - break; > > > - } > > > + intel_encoder = dev_priv->dig_port_map[port]; > > > + if (intel_encoder && intel_encoder->type == INTEL_OUTPUT_HDMI && > > > > Is it really legit to call these functions with a port for which we don't > > have an encoder? WARN_ON(!encoder) here and in the other places? > > Currently there are little checks in the caller side. So I guess only > a few of them deserve WARN_ON(). The empty encoder and empty crtc > would be good with WARN_ON(), as the port is supposed to be real. > The HDMI check may be silent as is. > > > Or would > > that require some function for snd-hda to inquire i915 which ports are > > enabled (which we probably should have to avoid registering audio ports > > that aren't there)? > > > > Otherwise lgtm. > > OK, I'll add WARN_ON() to them.
It turned out that the encoder might be NULL for MST, as currently it's not set properly yet. So WARN_ON() will splat too much unnecessarily. Though, I rewrote a bit about the check and give a bit more messages. Below is the revised patch. So far, I have only this change, so I hesitate to resubmit the whole patchset. If a full patchset is still preferred, let me know. thanks, Takashi -- 8< -- From: Takashi Iwai <[email protected]> Subject: [PATCH v4] drm/i915: Add reverse mapping between port and intel_encoder This patch adds a reverse mapping from a digital port number to intel_encoder object containing the corresponding intel_digital_port. It simplifies the query of the encoder a lot. Signed-off-by: Takashi Iwai <[email protected]> --- v3->v4: add a bit more verbose check for NULL encoder, etc. drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/intel_audio.c | 57 +++++++++++++++----------------------- drivers/gpu/drm/i915/intel_ddi.c | 1 + drivers/gpu/drm/i915/intel_dp.c | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 2 ++ 5 files changed, 28 insertions(+), 35 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 15c6dc0b4f37..9dbc143cac27 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1944,6 +1944,8 @@ struct drm_i915_private { /* perform PHY state sanity checks? */ bool chv_phy_assert[2]; + struct intel_encoder *dig_port_map[I915_MAX_PORTS]; + /* * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch * will be rejected. Instead look for a better place. diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index eeac9f763110..6380b2400448 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -636,15 +636,14 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, int port, int rate) { struct drm_i915_private *dev_priv = dev_to_i915(dev); - struct drm_device *drm_dev = dev_priv->dev; struct intel_encoder *intel_encoder; - struct intel_digital_port *intel_dig_port; struct intel_crtc *crtc; struct drm_display_mode *mode; struct i915_audio_component *acomp = dev_priv->audio_component; - enum pipe pipe = -1; + enum pipe pipe = INVALID_PIPE; u32 tmp; int n; + int err = 0; /* HSW, BDW, SKL, KBL need this fix */ if (!IS_SKYLAKE(dev_priv) && @@ -655,26 +654,21 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, mutex_lock(&dev_priv->av_mutex); /* 1. get the pipe */ - for_each_intel_encoder(drm_dev, intel_encoder) { - if (intel_encoder->type != INTEL_OUTPUT_HDMI) - continue; - intel_dig_port = enc_to_dig_port(&intel_encoder->base); - if (port == intel_dig_port->port) { - crtc = to_intel_crtc(intel_encoder->base.crtc); - if (!crtc) { - DRM_DEBUG_KMS("%s: crtc is NULL\n", __func__); - continue; - } - pipe = crtc->pipe; - break; - } + intel_encoder = dev_priv->dig_port_map[port]; + if (!intel_encoder || !intel_encoder->base.crtc || + intel_encoder->type != INTEL_OUTPUT_HDMI) { + DRM_DEBUG_KMS("no valid port %c\n", port_name(port)); + err = -ENODEV; + goto unlock; } - + crtc = to_intel_crtc(intel_encoder->base.crtc); + pipe = crtc->pipe; if (pipe == INVALID_PIPE) { DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port)); - mutex_unlock(&dev_priv->av_mutex); - return -ENODEV; + err = -ENODEV; + goto unlock; } + DRM_DEBUG_KMS("pipe %c connects port %c\n", pipe_name(pipe), port_name(port)); mode = &crtc->config->base.adjusted_mode; @@ -687,8 +681,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, tmp = I915_READ(HSW_AUD_CFG(pipe)); tmp &= ~AUD_CONFIG_N_PROG_ENABLE; I915_WRITE(HSW_AUD_CFG(pipe), tmp); - mutex_unlock(&dev_priv->av_mutex); - return 0; + goto unlock; } n = audio_config_get_n(mode, rate); @@ -698,8 +691,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, tmp = I915_READ(HSW_AUD_CFG(pipe)); tmp &= ~AUD_CONFIG_N_PROG_ENABLE; I915_WRITE(HSW_AUD_CFG(pipe), tmp); - mutex_unlock(&dev_priv->av_mutex); - return 0; + goto unlock; } /* 3. set the N/CTS/M */ @@ -707,8 +699,9 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, tmp = audio_config_setup_n_reg(n, tmp); I915_WRITE(HSW_AUD_CFG(pipe), tmp); + unlock: mutex_unlock(&dev_priv->av_mutex); - return 0; + return err; } static int i915_audio_component_get_eld(struct device *dev, int port, @@ -716,27 +709,21 @@ static int i915_audio_component_get_eld(struct device *dev, int port, unsigned char *buf, int max_bytes) { struct drm_i915_private *dev_priv = dev_to_i915(dev); - struct drm_device *drm_dev = dev_priv->dev; struct intel_encoder *intel_encoder; struct intel_digital_port *intel_dig_port; const u8 *eld; int ret = -EINVAL; mutex_lock(&dev_priv->av_mutex); - for_each_intel_encoder(drm_dev, intel_encoder) { - if (intel_encoder->type != INTEL_OUTPUT_DISPLAYPORT && - intel_encoder->type != INTEL_OUTPUT_HDMI) - continue; + intel_encoder = dev_priv->dig_port_map[port]; + if (intel_encoder) { + ret = 0; intel_dig_port = enc_to_dig_port(&intel_encoder->base); - if (port == intel_dig_port->port) { - ret = 0; - *enabled = intel_dig_port->audio_connector != NULL; - if (!*enabled) - break; + *enabled = intel_dig_port->audio_connector != NULL; + if (*enabled) { eld = intel_dig_port->audio_connector->eld; ret = drm_eld_size(eld); memcpy(buf, eld, min(max_bytes, ret)); - break; } } diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 76ce7c2960b6..59deb0d85533 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -3295,6 +3295,7 @@ void intel_ddi_init(struct drm_device *dev, enum port port) intel_encoder->get_config = intel_ddi_get_config; intel_dig_port->port = port; + dev_priv->dig_port_map[port] = intel_encoder; intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) & (DDI_BUF_PORT_REVERSAL | DDI_A_4_LANES); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index e1ceff7ab265..e1456ead5c53 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -6003,6 +6003,7 @@ intel_dp_init(struct drm_device *dev, } intel_dig_port->port = port; + dev_priv->dig_port_map[port] = intel_encoder; intel_dig_port->dp.output_reg = output_reg; intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index bdd462e7c690..c046017be786 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -2148,6 +2148,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, void intel_hdmi_init(struct drm_device *dev, i915_reg_t hdmi_reg, enum port port) { + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_digital_port *intel_dig_port; struct intel_encoder *intel_encoder; struct intel_connector *intel_connector; @@ -2216,6 +2217,7 @@ void intel_hdmi_init(struct drm_device *dev, intel_encoder->cloneable |= 1 << INTEL_OUTPUT_HDMI; intel_dig_port->port = port; + dev_priv->dig_port_map[port] = intel_encoder; intel_dig_port->hdmi.hdmi_reg = hdmi_reg; intel_dig_port->dp.output_reg = INVALID_MMIO_REG; -- 2.6.3 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
