On Fri, Dec 11, 2015 at 03:12:05PM +0800, Gary Wang wrote:
> The total delay of HDMI hotplug detecting with 30ms should have
> been split into a resolution of 3 retries of 10ms each, for the worst
> cases. But it still suffered from only waiting 10ms at most in
> intel_hdmi_detect(). This patch corrects it by reading hotplug status
> with 4 times at most for 30ms delay.
>
> Reviewed-by: Cooper Chiou <[email protected]>
> Tested-by: Gary Wang <[email protected]>
> Cc: Gavin Hindman <[email protected]>
> Cc: Sonika Jindal <[email protected]>
> Signed-off-by: Gary Wang <[email protected]>
> ---
> drivers/gpu/drm/i915/intel_hdmi.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
> mode change 100644 => 100755 drivers/gpu/drm/i915/intel_hdmi.c
>
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
> b/drivers/gpu/drm/i915/intel_hdmi.c
> old mode 100644
> new mode 100755
> index be7fab9..ba042cf
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1394,11 +1394,13 @@ intel_hdmi_detect(struct drm_connector *connector,
> bool force)
>
> intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS);
>
> - while (!live_status && --retry) {
> + do {
> live_status = intel_digital_port_connected(dev_priv,
> hdmi_to_dig_port(intel_hdmi));
> + if (live_status || !retry)
> + break;
> mdelay(10);
> - }
> + } while (retry--);
I agree with Ville, let's just go with an obviously correct for loop here.
This is apparently too hard ;-)
-Daniel
>
> if (!live_status)
> DRM_DEBUG_KMS("Live status not up!");
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
